• Asian-Australasian Journal of Animal Sciences
• /
• 제30권6호
• /
• pp.811-818
• /
• 2017

Objective: This experiment was conducted to investigate the effects of fungal treated oil palm fronds (FTOPF) on performance, carcass traits, meat quality, and muscle chemical composition. Methods: Eighteen growing crossbred male goats (Thai Native${\times}$Anglo Nubian) with $18.7{\pm}2.0kg$ of initial body weight (BW) were stratified and blocked by BW in a randomized complete block design. Three diets containing 30% of oil palm fronds (OPF) either untreated (UOPF) or treated with Lentinussajor-caju (FTOPF) with or without urea (FTOPFU) were used as roughage sources in total mixed rations (TMRs). The diets were offered ad libitum and weight gain was determined. At the end of the experimental period, the harvest data and carcass characteristics of the goats were recorded, and muscular longissimus dorsi composition was determined. Results: No significant effect of fungal treated (FT) inclusion was observed in any of the feed intake, growth performance, and carcass characteristics. Likewise, no apparent effects on carcass composition and muscle chemical composition were detected in this study, except for hind leg and chump were affected (p<0.05) by FT inclusion. Conclusion: In conclusion, feeding of fungal (Lentinussajor-caju) treated oil palm frond in TMR diet did not affect performance and carcass characteristics in finishing goats.

• 설비공학논문집
• /
• 제29권10호
• /
• pp.515-529
• /
• 2017

EnergyPlus, which is widely used in various fields, provides Simple Window Model, a window model that can be used practically. However, the results of building load using the model are different from those of the standard model. The main cause of the deviation by Simple Window Model was analyzed to be due to the assumption that all windows were considered as single layer. The purpose of this study is to propose a window model that improves the cause of deviation by Simple Window Model and can be easily calculated from the algebraic relations. The proposed window model solved the heat balance equation algebraically by using seven window characteristic coefficients. The coefficient relationships consisted of the heat transmission coefficient and solar heat gain coefficient as input parameters make practical use and calculation possible. As a result of comparing the deviation between each window model by implementing the dynamic analysis method, the proposed window model showed that the deviation of the total heating/cooling energy consumption was reduced to 1/3 compared to Simple Window Model for one year. Although the maximum energy consumption did not show any significant improvement, the indoor temperature evaluation showed significantly reduced deviation.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.543-550
• /
• 2002

In this paper, the $CF_4$ decomposition rate and by-product were investigated for two simulated plasma reactors which are metal particle reactor and spiral wire reactors as a function of mixed gases. The $CF_4$ decomposition rate by plasma reactor with metal particle electrode had a gain of 20~25% over that by plasma reactor with spiral wire electrode. The $CF_4$ decomposition efficiency increases with increasing applied voltage up to the critical voltage for spark formation. The $CF_4$ decomposition efficiency of metal particle reactor was about 80% at AC 24kV. The $CF_4$ decomposition rate used Ar-$N_2$ as base gas was the highest among three base gases of $N_2$, $Ar-N_2$, air. The by-products of the $N_2$, $N_2Ar$ base as were similar, but in case of air base they were different.

• 한국제4기학회지
• /
• 제18권2호통권23호
• /
• pp.67-73
• /
• 2004

Dissected erosional surfaces are widely distributed in the western part of Korea (e.g. Icheon, Chungju, Jecheon, Seosan). The deposits with thickness of less than 2m occur on the smooth bedrock surface are composed of poorly sorted subangular gravels with less than 20cm diameter. However, only weathered mantle of granites without the gravel layer are observed at some outcrops. The results of grain size analysis of deposits of Icheon district revealed that the characteristic of the gain size distribution is very similar with the results of sheetflood deposits presented by Blair (1999) in the Death Valley. Loess layer with buried soil layers of MIS7 covers the sheetflood deposits. The loess layer implies that the sheetflood deposits occurred before MIS7 based on the typical Loess sequences presented by Naruse et al.(2003). On the other hand, the climate of Korean Peninsula in MIS2 was very dry and cold (Yoon and Hwnag, 2003) by pollen analysis. This is because Yellow Sea was completely emerged during the MIS2(e.g. Sau\ito, 1998). So, it is thought that the climate in Korean Peninsula of not only MIS2 but also other glacial ages such as MIS8 was similar with present Mongolian climates. Tanaka et al.(2005) pointed out that Hortonian overlandflow occurs in grass vegetated granite basin in Mongolia. Therefore, dissected piedmont gentle slopes in the western Korea were possibly formed by sheetflood erosion during probably MIS8 as pediment widely distributed in Mongolia.

• 한국전자파학회논문지
• /
• 제12권6호
• /
• pp.919-930
• /
• 2001

본 논문에서는 원형편파를 이용하는 적층구조의 광대역 평판형 배열안테나를 연구하였으며, 적층구조의 보조적인 편파유발부와 기생패치의 최적 설계를 통하여, 임피던스 및 축비특성에서의 이중공진특성을 구현하였다 따라서, 기존에 사용되고 있는 축비대역확장기법을 사용하지 않는 단일급전방식 원형편파용 평판안테나의 대역확장에 기여할 수 있으며, 공진주파수의 보정설계를 통하여 이중대역안테나로의 활용을 기대할 수 있다. 또한, 해당안테나를 국내 위성방송서비스대역에 적용하여 설계 및 제작하였으며, 임피던스대역폭 9.7%, 안테나 이득 24 dBi와 이중공진특성에 의한 2.8 %(11.4 GHz)와 1.4 %(11.8 GHz)의 3 dB 축비대역폭을 갖는다.

• 한국전자파학회논문지
• /
• 제14권5호
• /
• pp.444-449
• /
• 2003

본 논문은 IMT-2000 단말기용 인쇄기판형 안테나를 설계 및 제작하였다. 안테나는 FR-4($\varepsilon_{{\gamma}}$/=4.6) PCB 기판에 비아 홀(Via-hole)과 라인을 이용한 헬리컬 구조이며, 급전방식은 GCPW(Grounded Co-Planer Waveguide)로 구현하였다 상용 RF-Tool인 안소프트(Ansoft)사의 HFSS를 사용하여 안테나 구조를 설계하고,주파수 특성 및 복사 특성을 측정한 결과는 설계 주파수 대역인 1.920~2.170 GHz을 만족하였고, 2.045 GHz에서 공진하였으며, 321 MHz의 대역폭(VSWR<2.0) 특성을 나타내었다. 이때 안테나의 복사이득은 -l dBi 임을 확인할 수 있었다. 복사이득은 -l dBi 임을 확인할 수 있었다.

• 한국전자통신학회논문지
• /
• 제9권10호
• /
• pp.1181-1187
• /
• 2014

본 논문에서는 차세대 디지털 무선통신시스템에 적용하기 위하여 소프트웨어를 기반으로 한 Polar 송신기를 설계하고 분석하였다. 구현한 Polar 송신기는 CORDIC 알고리즘을 적용하여 I/Q데이터를 입력받아서 진폭과 위상정보를 독립적으로 처리하는 Polar 변환을 하도록 하였으며, 소프트웨어를 이용하여 DDS의 출력신호의 주파수를 Sweep시킬 수 있도록 구성하였다. 구현한 Polar 송신기는 소프트웨어 제어를 통해 DDS의 주파수 제어범위 내에서 1.16 GHz까지 주파수를 제어할 수 있음을 보였다. 향후 이득, 위상, 출력 등 제어 가능한 블록요소들을 제어할 수 있음을 보였으며, 소프트웨어를 이용하여 SDR기반 디지털 무선통신시스템에 적용이 가능함을 보였다.

• International Journal of Automotive Technology
• /
• 제8권4호
• /
• pp.429-436
• /
• 2007

In this study, we improved control performance of an EMV (electromechanical valve) system using a PM/EM (permanent magnet/electromagnet) hybrid EMA (electromagnetic actuator) and showed the feasibilities of both soft landing and fast transition of the EMV system using a simple PID control. The conventional EMV systems using only EM show significant nonlinear characteristics. Therefore, it is very difficult to control the valve position and several complex control schemes are used. This paper focused on the control performance improvement using a PM/EM hybrid actuator. In particular, a PM is used as a key design parameter such as a bias current of a magnetic bearing in order to improve the linear characteristic of the actuator, although most PM/EM hybrid actuators use a PM as a power saver during valve-open and -closed states. First, a FE (finite element) analysis was performed to confirm its linear static force characteristics. Then, both a test rig and a valve control system were built in order to prove experimentally the control performance improvement of the actuator. Finally, feasibilities of both soft landing and fast transition of the system were shown experimentally through gain-scheduled PID (proportional derivative integral) control.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1017-1020
• /
• 2002

The pure Ti is taken annealing process for one hour at 90$0^{\circ}C$. The pure Ti is sufficient for ASTM B348 Grade2. The rolling mill roll the Ti-8Ta-3Nb(wt%) which became vacuum melting in arc furnace until the length is about 45mm and the thickness is about 6.05mm. Then it is made 6mm$\times$6mm$\times$44mm by wire cutting with EDM and it is made ∮ 6mm by rough cutting with the general purpose lathe. The machining accuracy of implant parts in the dental and medical science are decided by dimension, shpe, straightness, surface roughness. It is difficult to cut for the Ti alloy. It is caused problems of straight degree and surface roughness to the Ti alloy have many cases which length is smaller than diameter in cutting. Total 24 specimens different kind of 4 alloies are used in experiment to gain a cutting property. According to the cutting velocity, cutting depth, cutting temperature, feed and clearance angle experiments are performed. Conclusively it is expected that cutting depth of 0.5mm, feed velocity of 0.07mm/rev and cutting velocity of 80m/min could make a suitable result.

• 한국음향학회지
• /
• 제14권3호
• /
• pp.28-36
• /
• 1995

본 논문에서는 능동소음제어를 위하여 망각형 지연 LMS(least mean square) 알고리듬을 이용한 이중루프제어 모델을 제안하였다. 제안한 이중루푸제어 모델은 계산양을 줄이기 위해 이득과 음향시간지연인자를 이용하여 온라인으로 라우드스피커 특성 및 오차음경로를 추정한다. 이중루프구조를 통한 오차신호의 제어는 보다 견실한 제어시스템이 된다. 음향시간지연을 추정하기 위한 필터의 입력신호는 입력 마이크로폰 신호와 적응필터의 차를 사용한다. 망각형 지연 LMS 알고리듬은 비정상상태에서 계수들의 발산을 방지하기 위해 사용한다. 실제 소음신호에 대하여 제안한 이중루프제어 모델은 소음레벨이 평균 12.9dB정도 감쇠되었다.