• 제목/요약/키워드: Gain Characteristic

검색결과 535건 처리시간 0.03초

폴리머 재료를 이용한 새로운 비휘발성 단위 메모리 셀과 주변회로 제안 (New nonvolatile unit memory cell and proposal peripheral circuit using the polymer material)

  • 김정하;이상선
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.825-828
    • /
    • 2005
  • In this paper, we propose a new nonvolatile unit memory cell and proposal peripheral circuit using the polymer material. Memory that relies on bistable behavior- having tow states associated with different resistances at the same applied voltage - has attracted much interest because of its nonvolatile properties. Such memory may also have other merits, including simplicity of structure and manufacturing, and the small size of memory cells. We have plotted the load line graphs for the use of a polymer memory character, hence we have designed in the band-gap reference shape of a write/erase drive, and then designed in the 2-stage differential amplifier shape of a sense amplifier in the consideration of a low current characteristic of a polymer memory cell. The simulation result shows that is has high gain about 80dB by sensing the very small current.

  • PDF

저미분 폐내화물 종류 및 혼입율 변화에 따른 혼화재 다량치환 모르타르의 공학적 특성 (High Volume Mineral Admixture Mortar According to Waste Refractory and Mixing Ratio)

  • 한상윤;박도영;차천수;김현우;윤기원;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 추계 학술논문 발표대회
    • /
    • pp.134-135
    • /
    • 2015
  • This study analysed compressive strength and the expansion characteristic to utilize a high volume mineral admixture mortar for a aerated mortar and a plastering mortar. In this experiment, the result shows that the compressive strength gain was satisfactory in case that WR was replaced within 5%. Also, the difference between WR1 and WR was insignificant. It shows that the drying shringkage properties at large was showed being satisfactory generally compared with Plain when WR was replaced, but the effect was not significant.

  • PDF

호주의 공학기사 양성과정(전문학사, 고급 디플로마)의 성격과 운영 비교 (Comparison of Characteristic and Implementation of Engineers Associate Qualifications(Associate degree and Advanced diploma) in Australia)

  • 신동은
    • 공학교육연구
    • /
    • 제20권2호
    • /
    • pp.9-18
    • /
    • 2017
  • This paper investigates the characteristics and implementation of associate degree and advanced diploma in Australia, which belong to level 6 in AQF, to gain meaningful implications for engineering associate education in Korea. In Australian Qualification Framework and Engineers Australia's national generic competency standards are regarded as common benchmark for both qualifications. Training packages for advanced diploma were changed according to the subject/and national benchmark. and were developed to meet the needs of technical workers and para-professionals in the engineering field. The author recommends three suggestions from the findings - leadership of ABEEK for making benchmark for associate degree program in engineering in Korea, in which competency-based curriculum is currently being adopted by policy. development of outcomes descriptor of qualification and educational responsibilities.

전류모드제어를 적용한 직류전원장치의 해석 및 보상에 관한 연구 (The Analysis and Compensation of DC to DC Converter with Current Mode Controller)

  • 김철진;김영태;송요창
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제52권5호
    • /
    • pp.230-237
    • /
    • 2003
  • Current mode control has been used for DC to DC converters for over twenty years. There are many different control schemes which use the inductor current signal in one way or another to control the DC to DC converter. In this paper, the state space averaging technique is applied for the analysis of flyback type current mode control circuit. We made real converter for the guarantee of stable output characteristic and proper design of feedback circuit. The validity of proposed method is verified from test result. The improvement of stability is confirmed by sinusoidal signal injection method with isolated transformer. It is known that phase margin is sufficient and gain crossover frequency fc is early 1/5 of switching frequency, fs, from the experimental result with frequency response analyzer.

전력용 IGBT의 미시적인 모델링에 의한 소자특성 및 전압형 인버터 시뮬레이션 (Device Characteristic and Voltage-Type Inverter Simulation by Power IGBT Micro Modeling)

  • 서영수;백동현;조문택;이상훈;허종명
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
    • /
    • pp.63-66
    • /
    • 1996
  • An micro model for the power insulated Gate Bipolar Transistor(IGBT) is developed. The model consistently described the IGBT steady-state current-voltage characteristics and switching transient current and voltage waveform for all loading conditions. The model is based on the equivalent circuit of a MOSFET with supplies the base current to a low-gain, high-level injection, bipolar transistor with its base virtual contact at the collector and of the base. Model results are compared with measured turn-on and turn-off waveform for different drive, load, and feedback circuits.

  • PDF

A Technique for Broadbanding the CPW-Fed Bow-Tie Slot Antenna

  • Kim Sung-Hak;Wen Lijun;Ko Han-Woong;park Dong-Hee;Ahn Bierng-Chearl
    • Journal of electromagnetic engineering and science
    • /
    • 제5권1호
    • /
    • pp.14-20
    • /
    • 2005
  • In this paper, a technique is presented for broadbanding the bow-tie slot antenna fed by a CPW(coplanar waveguide). The bandwidth performance of existing bow-tie slot designs is greatly enhanced by optimizing the slot shape and properly adjusting the characteristic impedance of the coplanar waveguide feeding the slot. To connect the 50-ohm input coaxial line to the CPW feed line, a linear taper in the CPW is employed. The designed antenna shows a 3.5 $\~$ 10.0 GHz impedance bandwidth, a 3.5 $\~$ 6.0 GHz pattern bandwidth, and a 5.5 $\~$ 7.5 dBi gain over 3.5 $\~$ 6.0 GHz. Above 6.0 GHz, the antenna radiation pattern appreciably deviates from the typical dipolar pattern.

DDV를 이용한 압력 제어시스템의 강인제어 (Robust Control of Pressure Control System Using Direct Drive Valve)

  • 이창돈;박성환;이진걸
    • 제어로봇시스템학회논문지
    • /
    • 제11권12호
    • /
    • pp.1077-1082
    • /
    • 2005
  • In this paper, it is proposed that the method for constituting pressure control system controlled by Direct Drive Valve (DDV). The DDV has a pressure-feedback-loop itself. It can eliminate non-linearity and uncertainty oi hydraulic system such as uncertain discharge coefficient and change of bulk-modulus. However, the internal feedback-loop can not compensate them perfectly. And fixed gain of the DDV's internal feedback-loop is not proper to apply it through wide pressure range. The steady state error and nonlinear characteristic of transient behaviour is observed in the experiment. So another controller is needed for the desirable performance of the system. To compose the controller, the pressure control system controlled by DDV is modeled mathematically and the parameters of the model are identified using signal-compression method. Then sliding mode controller is designed based on mathematical model. Desirable performance of the pressure control system controlled by DDV is obtained.

WiBro 시스템을 위한 인지무선 Cyclostationary 스펙트럼 센싱 성능 (Performance of Cyclostationary Spectrum Sensing of Cognitive Radio Based for WiBro Systems)

  • 구성완;김진영
    • 정보통신설비학회논문지
    • /
    • 제8권3호
    • /
    • pp.111-115
    • /
    • 2009
  • Cognitive Radio (CR) technology is proposed for using the unused spectrum band efficiently because of the spectrum scarcity problems. Spectrum sensing is one of the most challenging issues in cognitive radio system. In this paper, we focus on the signal detection of WiBro system band. As most of the modulated signals can be treated as cyclostationary random process, we can detect the signal of the OFDM signals in WiBro system. OFDM symbols using WiBro system have several pilot subcarriers and periodic pilots have cyclostationary characteristic. To improve the detection performance, we get diversity gain using multiple antennas.

  • PDF

농촌마을 개발계획을 위한 어메니티특성에 관한연구 -충북 영동군 시항골권역을 대상으로- (A Study on the Characteristics Amenities for rural village development plan - A subject of Chungbuk Yeongdong-gun sihanggol area -)

  • 주재철;정다영;송이;리신호
    • 한국농촌건축학회논문집
    • /
    • 제13권4호
    • /
    • pp.133-140
    • /
    • 2011
  • The Government's investment for rural issues and continues to increase in the rural village developed and emerging. Among these development plans in the amenity characteristics analysis is an essential element of working. In this study, Chungbuk Yeongdong sihanggol in sub-analysis of the resources and amenities to the regional characteristics you want to animate a plan was developed. Analysis of city attractions as well as through seeking to gain a competitive edge and to reflect the resident physicians conducted a SWOT analysis. Major strategic include utilizing the strengths sihanggol opportunities for the many ways to leverage the resources and sub-concepts derived from detailed planning to detailed business information presented.

부하 변동 특성 개선을 위한 이득 조정 기법 (Gain scheduling method for improving load transient characteristic)

  • 조제형;박기범;박진식;문건우;윤명중
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2011년도 전력전자학술대회
    • /
    • pp.388-389
    • /
    • 2011
  • 본 논문에서는 서버용 전원 장치의 DC-DC단에 사용되는 디지털 전압 모드 제어기를 설계한다. 서버용 전원 장치는 2차 측에 고전류가 흐르는 사양으로 인하여 부하 전류에 따라 출력 인덕턴스 변화를 가지게 되며, hold-up time 규제를 만족하기 위하여 입력 전압의 변동 범위를 가진다. 이와 같은 조건은 제어기를 설계하는데 제약을 작용하게 되어 고정 이득을 가지는 방식에서는 최적화된 부하 변동 특성을 얻기 힘들다. 이와 같은 문제점을 해결하기 위하여 제어기의 이득 조정 기법을 제안하고 실험을 통하여 검증한다.

  • PDF