• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.855-865
• /
• 2001

The optimization condition of injection molding for a commercial product of TV speaker grille of A Company was induced using a CAE software of Moldflow. The flow and packing phase analysis was performed by using flow balance, runner balance, and the intermediate one by using the above two balances, which were used for controlling the amount of packing resins into the cavity, Later, the analysis performed by using the measured viscosity (local database) at various shear rates and the results were compared with the computer simulation using the standard database. Flow balance induced minimized weld line resulted in a better appearance and physical properties of the were line, but exhibited a disadvantage of large deformation and gas formation due to over-packing of the molten resin in the center of the speaker grille. Runner balance improved the disadvantage of the flow balance by controlling the amount of molten resin injected from the gate, however resulted reduced mechanical properties and poor appearance of the weld line. However, the modified method induced from the flow and runner balance improved the disadvantages by changing the runner size. In addition, the analyses based on the local database and the standard database were compared. Although the measured viscosity was slightly higher and the temperature distribution was broader than the standard database, no distinct difference was obtained from the analysis using the two different databases.

• Advances in pediatric surgery
• /
• v.19 no.2
• /
• pp.81-89
• /
• 2013

The purposes of this study was to describe the clinical correlation of mass size and gestational age, prognostic factors in sacrococcygeal teratoma (SCT) at a tertiary pediatric surgery, University of Ulsan College of Medicine and Asan Medical Center (AMC), Seoul, Korea. Fifty five patients admitted to the AMC with a SCT between May 1989 and April 2013 were included in this retrospective review. Mean follow up was 861 days. Mean maternal age at delivery was $30{\pm}2.7$ year, mean gestational age (GA) was $36.9{\pm}3.6$ wks, and preterm delivery was 21.8%. Birth body weight was $3182{\pm}644$ g and male vs. female ratio was 1:2.05. We can't find significant difference between Caesarean section and maternal age at delivery (p =0.817). But, caesarean section was favored by gestational age (p = 0.002), larger tumor size (p =0.029) or higher tumor weight fraction rate to birth body weight (p =0.024). Type I was 13, II 21, III 17, and IV 3 according to Altman et al. classification. The tumor component was predominantly cystic(> 50%) in 73.1 %. And the majority histological classification of tumors were mature teratoma (70.3%). The motality rate was 5.5%. Three patients expired because of postpartum bleeding, post-op bleeding related complication such as DIC. SCT recurred in four patients. The interval between first and second operation was $206.2{\pm}111.0$ d (range 53~325 d). In two patients, serum AFP levels were elevated at a regular checkup without any symptom, and subsequent imaging studies revealed SCT. The most common cause of death was bleeding and bleeding related complication. So Caesarean section and active peripartum and perioperative management will be needed for huge solid SCT. In the case of Yolk sac tumor or huge immature teratoma, possibility of recurrence have to be always considered, so follow up by serial AFP and MRI is important for SCT management.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.1
• /
• pp.27-34
• /
• 2016

Garlic has drawn attention as a food material for its anti-oxidative and anti-inflammatory properties as well as for prevention and treatment of cancer. In order to increase efficiency, various aging methods for garlic have been attempted. In particular, thermally processed garlic is known to have higher biological activities due to its various chemical changes during heat treatment. Therefore, in this study, we investigated the anti-oxidative effects of garlic extracts aged at low temperature ($60{\sim}70^{\circ}C$). In the results, 2,2-diphenyl-1-picrylhydrazyl and 2,2-azino-bis (3-ethylbenzo-thiazoline-6-sulfonate) radical scavenging activities and ferric reducing ability of low temperature-aged garlic (LTAG) were similar to those of raw garlic. LTAG also showed decreased lipopolysaccharide (LPS)-induced production of reactive oxygen species, although there were not significant differences among samples. In addition, xanthine oxidase activity was inhibited by LTAG; the 15 days and $60^{\circ}C$ extract showed outstanding inhibition compared with the others. To understand the molecular mechanisms behind the anti-oxidative activity of LTAG, we performed quantitative real-time PCR analysis. The 30 days and $70^{\circ}C$ extract upregulated mRNA expression of antioxidant enzymes such as Cu/Zn-superoxide dismutase (SOD), Mn-SOD, glutathione peroxidase, and catalase in LPS-stimulated RAW 264.7 cells. This result indicates that LTAG can be a functional food as a nature antioxidant and antioxidant substance.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.9
• /
• pp.1288-1293
• /
• 2012

Yacon (Smallanthus sonchifolius) contains high amounts of fructooligosaccharides and has been known to promote health of the intestinal tract and to have anti-oxidative and anti-cancer activities. Yacon concentrates were added to make five different pan breads, each with the addition 0% (YE 0), 25% (YE 25), 50% (YE 50), 75% (YE 75), and 100% (YE 100) of yacon concentrates instead of sugar. The higher the yacon concentration in the dough, the more time was needed for the dough to rise. Higher yacon concentration also affected the color of the bread by lowering the L-value and raising the a and b values. The hardness and chewiness of the bread significantly decreased with increasing yacon concentration, while cohesiveness increased. In the bread sensory evaluation, the intensity of crust color, crumb color, yacon flavor, sweetness, yacon taste, moistness, and residual mouth feel were increased with increasing yacon concentrates, while the uniformity of crumb pores slightly decreased. The consumer acceptance of taste, flavor, texture, and overall acceptance were increased with increasing yacon concentrations. As a conclusion, the substitution of yacon concentrates for sugar improved bread quality and increased consumer acceptance.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.318-331
• /
• 1995

The c - axis oriented single crystal of $LiNbO_3$ and $LiNbO_3$ : 5mol%MgO was success-fully grown by Floating zone method using halogen lamp as a heat source. The effects of the sintering condition of the feed rod and the atmosphere gas during the crystal growth on the be havior of the feed rod/melt interface were studied for growing crystal with the high quality, and then, the optimum growth conditions were determined by studying the experimental param eters, such as gas flow rate, pulling rate, rotation speeds of the feed rod and the seed. The grown crystals were analyzed using the chemical etching to observe the tch pattern and the ICP (Inductively Coupled Plasma) to determine the composition uniformity and the impurity content of Fe. The effects of additive (5 mol % MgO) on the transmittance and refractive index was, also, analyzed. In order to compare the nonlinear optical oharacteristics of $LiNbO_3$ with those of the other optical materials, the nonlinear optical refractive index ($n_2$) was calcu l lated using the measured refractive index.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.965-970
• /
• 2005

In this paper, SPDT Tx/Rx MMIC switch applicable to IEEE 802.11a WLAN systems is designed and fabricated using a specific designed epitaxial layered pHEMT wafer and ETRI's $0.5{\mu}m$ pHEMT switch process. The SPDT switch exhibits a low insertion loss of 0.68dB, high isolation of 35.64dB, return loss of 13.4dB, power transfer capability of 25dBm, and 3rd order intercept point of 42dBm at frequency of 5.8GHz and control voltage of 0/-3V. The comparison of the measured performances with commercial products based on the GaAs pHEMT technology for low voltage operating at ${\pm}$ 3V/0V shows that the return loss is somewhat inferior to the commercial products and insertion loss is compatible with each other however, isolation characteristics are much better than in conventional chips. Based on these performances, we can conclude that the developed SPDT switch MMIC has an enough potential for IEEE802.11a standard 5 GHz-band wireless LAN applications.

• Therapeutic Science for Rehabilitation
• /
• v.9 no.3
• /
• pp.103-120
• /
• 2020

Objective : This study aims to understand the phenomenon of social admission in Korea's rehabilitation system by analyzing the perspectives of occupational therapists. Methods : We developed a written questionnaire based on RSAT and, in August 2019, distributed it to occupational therapists with more than three years of experience at the time. Data were analyzed using the van Kaam's method. Further, high frequency words were analyzed by word cloud in order to extract significant statements. Results : Forty-six written interviews were collected from various areas of Korea. We analyzed the data into 2 categories, 4 themes, 13 sub-themes. The two categories were 'hospital system' and 'external factors of occupational therapy practice'. The themes according to 'hospital system' were 'difficulties in implementing multidisciplinary approach' and 'inadequate discharge planning system'. The themes according to 'internal and external factors of occupational therapy' were analyzed as 'difficulties of occupational therapists' and 'difficulties in occupational therapy practice'. Conclusion : Occupational therapists in rehabilitation hospitals recognize that the reason for social admission is insufficient insurance systems related to occupational therapy services in rehab hospitals. This leads to difficulties in occupational therapy practice. We need to develop the insurance systems that can meet patient needs for social recovery.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.3
• /
• pp.319-332
• /
• 2004

Due to their high strength to weight ratios and excellent durability, fiber reinforced polymer(FRP) is widely used in construction industries. In this paper, a shape optimum design of FRP bridge decks haying pultruded cellular cross-section is presented. In the problem formulation, an objective function is selected to minimize the volumes. The cross-sectional dimensions and material properties of the deck of FRP bridges are used as the design variables. On the other hand, deflection limits in the design code, material failure criteria, buckling load, minimum height, and stress are selected as the design constraints to enhance the structural performance of FRP decks. In order to efficiently treat the optimization process, the cross-sectional shape of bridge decks is assumed to be a tube shape. The optimization process utilizes an improved Genetic Algorithms incorporating indexing technique. For the structural analysis using a three-dimensional finite element, a commercial package(ABAQUS) is used. Using a computer program coded for this study, an example problem is solved and the results are presented with sensitivity analysis. The bridge consists of a deck width of 12.14m and is supported by five 40m long steel girders spaced at 2.5m. The bridge is designed to carry a standard DB-24 truck loading according to the Standard Specifications for Highway Bridges in Korea. Based on the optimum design, viable cross-sectional dimensions for FRP decks, suitable for pultrusion process are proposed.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.157-167
• /
• 2004

A stoichiometric mixture of evaporating materials for $CuAlSe_{2}$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $CuAlSe_{2}$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $680^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuAlSe_{2}$ single crystal thin films measured with Hall effect by van der Pauw method are $9.24{\times}10^{16}cm^{-3}$ and $295cm^{2}/V{\codt}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CuAlSe_{2}$ obtained from the absorption spectra was well described by the Varshni's relation, $E_{g}(T)$ = 2.8382 eV - ($8.68{\circ}10^{-4}$ eV/K)$T^{2}$/(T + 155 K). The crystal field and the spin-orbit splitting energies for the valence band of the $CuAlSe_{2}$ have been estimated to be 0.2026 eV and 0.2165 eV at 10 K, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_{5}$ states of the valence band of the $CuAlSe_{2}$. The three photocurrent peaks observed at 10 K are ascribed to the $A_{1-}$, $B_{1-}$, and $C_{1-}$ exciton peaks for n = 1.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.3
• /
• pp.13-24
• /
• 2013

With the increase of visitors to rural tourism villages, the direct selling at sites is getting vitalized. Accordingly, their display stores is getting more important. Therefore, this study has selected 30 domestic rural tourism villages as study objects for the attitude survey of 200 farming suppliers and the site examination for the designs of those display stores in order to analyze their status and classify the types of necessity. Such operation status as sale item, sale method, method of supply and demand, major customer, sales scale, manager, opening hour, and operation cost were examined, to identity and for design factors the pattern, material quality and color were investigated. For the attitude of farming suppliers, the tactics of sales, the reason for being positive or negative, the functionality and the features of display stores were examined through brainstorming. IBM SPSS Statistics 20 Program was employed for Frequency, which indicated that village chiefs and store managers with the sales scale of 1 to 20 million won are dealing with female customers in their 40's and 50's and that those stores are open at the time of experience or year round without any operation expense. Permanent type and Fixed type were found to be the design factors of the display-case type with the material and the color of wood and orange respectively. The result of investigation analysis of farming suppliers' attitude showed the followings: the need of display stores is quite high, structure type and permanent type have high fitness and from the viewpoint of display-on-table type as a standard moving type was very convenient. The analysis of significant items at the characteristics of those display stores revealed that their locations, quality conservation, sanitation, users' convenience, designs and promotion are very important. The result of status analysis revealed that though there is a correlation among the types of display stores depending on the visiting season of tourists their installing is not desirable. Three types have been analyzed: Type 1 is a structure type only in the villages with continuous visitors, Type 2 a moving-table type only in the villages with temporary visitors and Type 3 is a fixed display-case type.