• Culinary science and hospitality research
• /
• v.5 no.2
• /
• pp.115-130
• /
• 1999

Preservative effects of natural preservatives, citric acid and salt on chopped garlic were investigated. Citric acid was very effective for the repression of bacteria multiplying and browning of chopped garlic in 0.5%~1% concentration. Salt had an effect on the repression of bacteria multiplying and browning color of chopped garlic except for 1% NaCl. Synergy effect between citric acid and NaCl was also very good for the decreasing of bacteria multiplying and the maintaining of Hunter color of chopped garlic. Compounded effect among the GF, CA and ascorbic acid was somewhat proper in the sensory evaluation of chopped garlic. And the sensory evaluation score was best in chopping size 3mm(diameter) of chopped garlic and viscosity 4500cp. of chopped garlic.

• Journal of Music and Human Behavior
• /
• v.11 no.1
• /
• pp.21-37
• /
• 2014

The significant role of joint attention in the development of children with autism spectrum disorder (ASD) has highlighted the importance of early intervention. With the emphasis on the effective cueing and reinforcer for orienting to social stimuli in improving responding to joint attention (RJA) of children with ASD, the use of musical cue was hypothesized. This study aimed to examine the occurrence of RJA behaviors depending on the attentional cue, which differed in the level of information and type of auditory modality. Nine children with ASD participated in this study. The use of eight different joint attention cues were analyzed in terms of the frequency and accuracy of RJA behaviors elicited. The results of the study showed that RJA behaviors occurred more frequently with musical cues than with verbal cues and the mean accuracy rate of RJA was higher with musical cues (p = .047). Musically delivered eliciting and directing cues accompanied with pointing elicited the highest attentional shift and RJA accuracy. The significant increases in RJA with the use of musical cues indicated that incorporating musical elements into an attentional cue may provide more accurate cue information, enough to improve RJA behaviors of children with autism.

• The Magazine of the IEIE
• /
• v.11 no.5
• /
• pp.42-50
• /
• 1984

국내의 다음세대 컴퓨터 개발을 위한 VLSI 설계와 CAD 분야에 대한 연구 방향을 제시한다. 연구의 목표는 국제적으로 경쟁할 수 있는 VLSI 설계능력과 백만개 정도의 트랜지스터로 자성된 회로를 경제적으로 설계하기 위한 CAD 기술과 System의 확립이다. ·새로운 회로 구조와 알고리즘에 대한 연구 · CAD 도구와 언어의 개발에 관한 첨단 CAD 기술개발연구 · VLSI 설계에 필요한 CAD 도구 이용과 개발에 필요한 표준 인터페이스, 네트워킹, 컴퓨팅 하드웨어. 시스템 소프트웨어에 대한 연구등의 부분으로 크게 나눌 수 있다. 이용 가능한 CAD system을 평가하고 개선하며 첨단 CAD에 대한 소프트웨어와 하드웨어에 대해 · 컴퓨팅 하드웨어 · 프로그램 분위기 · 네트워킹 능력 ·자료 교환을 위한 표준인터페이스 등에 관해 조사분석도 병행한다. CAD에 관한 세부적인 연구 과제는 · 시스템 사양언어 · 설계 검증 ·시스템시뮬레이션· 설계 합성 · 설계 해석· 설계 방법론·디바이스와 공정 모델링 프로그램 등이다. 고속 계산용 VLSI에 관한 구조와 알고리즘은 행렬 계산을 위한 ·분산 배열 처리 회로 ·시스토릭 (Systolic) 배열 회로 ·셀률라(Cellular) 논리 회로 · 3차원 배열 회로 와 · 비규칙적 계산 알고리즘을 갖는 VLSI가 있다. VLSI설계훈련과 CAD 기술 축적을 위해 CAD enter를 설립하여 전국적인 CAD 네트워킹을 관계 연구소와 여러 대학에 가설하며, MPC 계획을 추진한다. VLSI설계 가능성이 입증되면 VLSI 설계능력을 더욱 향상 시키기 위해 0.5∼1.0mm기술의 silicon faundary를 설립한다. 연구 개발 조직은 대학, 산업체. 연구소가 삼위일체가 되어 수행될 수 있도록 연구 개발 위원회를 설치 운영하며 경쟁적이며 경제적으로 연구 업무를 집행하는 것이 바람직하다.았다.형질에 관여하는 귀전자에 미치는 기구에 대하여 검토할 여타가 있다고 보여진다. 분해능의 특징으로 미루어 앞으로는 레이저를 이용한 계측 방법이 그 주류를 이룰 것으로 사료된다. 우선 본 해설은 기체의 온도 및 농도의 광학적 측정방법중 Raman산란광 검출법에 대하여 실제로 측정하는 입장에서 간단히 소개한다.lity)이, 높은 $GA_3$함량에 기인된다'는 주장은 본실험(本實驗)으로 부인(否認)되었다. 따라서, 응용학적(應用學的) 측면에서 고려해 볼 때, 리베스식물(植物)의 육종기간 단축을 위한 모든 화아분화(花芽分化) 촉진 조치는 P.J.-식물(植物)이 20. node이상 생육하였을 때 취하는 것이 효율적인 것으로 결론 지어진다.앞당겨진 7月 셋째 週였다. 8. Culex (Culex) tritaeniorhynchus summoro년의 最大發生 peak는 1981年, 1982年 모두 8月 둘째 週였다. 9. Anopheles (Anopheles) sinensis의 最大發生 peak는 1981年에 7月 다섯째 週, 1982年은 2週 앞당겨진 7月 셋째 週였다. 10. 重要 3種의 最大 peak를 比城하면 Culex (Culex) pipiens pallens와 Anopheles (Anopheles) sinensis는 1981年과 1982年 모두 最大 peak時期가 同一하였으며, Culex (Culex) tritaeniorhynchus summoro년는 2年間 모두 8月둘째 週에 나타났다.osterior to manubrium and anterior to aortic arch) replacing the normal mediastinal fat. (2) In benign thymoma, the marging of the mass was smooth and the normal fat

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.592-599
• /
• 2019

This study aimed to develop an equation for estimating stem volume for Larix kaempferiin South Korea using independent variables, diameter at breast height (DBH), and height as being closely associated with stem volume. Analysis was conducted on the growth performance of 2,840 Larix kaempferi samples across South Korea after felling them and gleaning diameter data according to both stem height and stem analyses. In order to test the fitness of six different stem taper equations, empirical assessment was conducted for fitness index (FI), bias, mean, and absolute deviation (MAD), and coefficient variation (%CV). The two selectedmodels found to be optimal were the following: model one (V=a+bDBH²), established by employing DBH only; and model four (V=a+bDBH²H), established by utilizing DBH and height, respectively. The findings of non-linear regression indicated statistical significance (p < 0.05) in a and b, which were the coefficients for the intercepts and slopes of the models. The FI of the models ranged between 94% and 99%, and the bias was close to zero, while MAD ranged from 0.01 to 0.05, and %CV from 5.97 to 14.43, indicating a high level of fitness. Thus, using the suggested models, the basic information necessary for forest management was obtained, and an estimation of the stem volume was effected without delay soon after effecting DBH and height measurements.

• Journal of Korean society of Dental Hygiene
• /
• v.5 no.2
• /
• pp.171-184
• /
• 2005

In order to investigate correlation between mother's dental ca re for her children and their dental caries, this study was conducted wi th the dental examination record of 365 children who showed the same number of questionnaires with those examined for dental conditions and questionnaires written by mothers among children between three and six years of age and their mothers in Yeoncheon, Gyeonggi province in June 2004 to estimate frequency and percentage of general properties of subjects and mother's oral health care behaviors for her children by research items, to carry out cross-tabulation analysis and correlation analysis following Chi-square distribution for the presence of dental caries in deciduous teeth and oral health care behaviors, and to use decision tree analysis among data mining techniques for those factors associated with the presence of dental caries in deciduous teeth, and drew the following conclusions. 1. For mother's oral health care behaviors and attitudes for her children, 225 mothers(61.6%) confirmed their children's teeth-brushing; 278(76.2%) used no fluorine; and 286(78.6%) observed their children's teeth, 322 mothers(88.2%) instructed their children in teeth-brushing while 268 (73.4%) provided dental care, 232 mothers(63.7%) treated their children's cavity; 290(79.4%) believed that their children had good dental conditions; and 294(80.5%) answered that they began to provide their children with dental care in deciduous teeth. 2. As for the presence of dental caries in deciduous teeth and dental health care behaviors, there were statistically significant differences in employment, confirmation after teeth-brushing, teeth observation, instruction in time for teeth-brushing, use of fluorine, cavity treatment, time for dental care, and perception of dental conditions(p<0.05). 3. As for correlation between dental caries in deciduous teeth and oral health care behaviors, mothers who worked, who believed that their children didn't have good dental condition, and who thought that it was necessary to begin to provide dental care in permanent teeth were found to get their children to suffer from dental caries in deciduous teeth. Besides, those who failed to confirm teeth-brushing, who used no fluorine, and who failed to observe teeth and gave no instruction in time for teeth-brushing were shown to get their children to suffer from dental caries in deciduous teeth. 4. Variables to determine the presence of dental caries in deciduous teeth were classified by cavity treatment, mother's employment, time for dental care, and observation of children's teeth. The first node to determine the presence of dental caries in deciduous teeth was found to be cavity treatment; the next criteria for classification after cavity treatment were shown to be mother's employment and time for dental care. In case of children with no cavity, they were found to be mother's employment and teeth observation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2075-2082
• /
• 2006

This paper presents modeling and optimization techniques for hish efficiency solar cell process on single-crystalline float zone (FZ) wafers. Among a sequence of multiple steps of fabrication, the followings are the most sensitive steps for the contact formation: 1) Emitter formation by diffusion; 2) Anti-reflection-coating (ARC) with silicon nitride using plasma-enhanced chemical vapor deposition (PECVD); 3) Screen-printing for front and back metalization; and 4) Contact formation by firing. In order to increase the performance of solar cells in terms of efficiency, the contact formation process is modeled and optimized using neural networks and genetic algorithms, respectively. This paper utilizes the design of experiments (DOE) in contact formation to reduce process time and fabrication costs. The experiments were designed by using central composite design which consists of 24 factorial design augmented by 8 axial points with three center points. After contact formation process, the efficiency of the fabricated solar cell is modeled using neural networks. Established efficiency model is then used for the analysis of the process characteristics and process optimization for more efficient solar cell fabrication.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.380-384
• /
• 2010

Purpose: Distinguishing different types of implants and assessing the position and size of implants by radiologic exam after orbital wall reconstruction is important in determining the surgery outcome and forecasting prognosis. We observed time-dependent density changes in three types of implants (porous polyethylene, resorbing plate and titanium mesh plate) by performing facial bone CT after orbital wall reconstructions. Methods: A total of 32 patients, who had underwent orbital wall fracture surgery from October 2006 to March 2009 and received facial bone CT as outpatients at 1 postoperative year were included in the study. Follow-up facial bone CT was performed on the patients pre- operatively, 1 month post-operatively, and 1 year post-operatively to observe the status of the orbital implants. Medpor $^{(R)}$ (Porex Surgical, Inc., Newnan, Ga.) was used as porous polyethylene and followed-up in 14 cases; for resorbing plate, Synthes mesh plate (Synthes, Oberdorf, Switzerland) was used in the reconstruction, and followed-up in 11 cases; and titanium mesh plate usage was followed-up in 7 cases. Computed tomographic scan (CT) and water's view were done for radiography, and hounsfield unit (HU) was used to compare density of those facial bone CT. Wilcoxon signed rank test was applied to statistically verify measurement difference in each group of hounsfield units. Results: Facial bone CT examination performed in 1 month post-operative showed that the density of porous polyethylene, resorbing plate and titanium mesh plate were -42.07, 105.67 and 539.48 on average, respectively. Among the three types of implants, titanium mesh plate showed the highest density due to its radiopaque feature. Following up the density of three types of implants in CT during 1 year after the orbital wall fracture surgery, the density of porous polyethylene increased in 10.52 House Field Units and the resorbing plate was decreased in 26.87 HouseField Units. There were no significant differences between densities in 1 month post-operatively and 1 year post-operatively in each group ($p{\geq}0.05$). Conclusion: We performed facial bone CT on patients with orbital fractures during follow-up period, distinguishing the types of implants by the different concentration of implant density, and the densities showed little change even at 1 year post-operative. To observe how implant densities change in facial bone CT, further studies with longer follow-up periods should be carried out.

• Korean Journal of Weed Science
• /
• v.8 no.1
• /
• pp.15-22
• /
• 1988

In this experiment, interactions between light and other factors such as chilling, alternating temperature, moisture, content, oxygen, and seed coat which affect germination of Oenothera lamarckiana Ser. seed were investigated to study the physiological effects of light on the germination. Light induced the initial stage of seed germination before radical protrusion by affecting embryo rather than seed coat even under anaerobic condition or low water potential (-18 bars). This light effect on germinability of seed was suppressed by blue light irradiation and the effect was increased with increment of blue light intensity and irradiation time. However, the blue light effect was reversible. Chilling, alternating temperature, softening of seed coat and light showed promotive interaction in the induction of seed germination. Irradiation of filtered light (monochrome), however, reduced chilling effect on germination. Hydrogen-ion concentration and gibberellic acid treatment had no effect on light or dark germination.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.414-418
• /
• 2006

유비쿼터스 컴퓨팅의 인프라가 되는 센서 네트워크는 매우 작은 하드웨어로 이루어지는 많은 수의 센서 노드들로 구성된다. 이 네트워크의 토폴로지와 라우팅 방식은 그 목적에 따라 결정되어야 하며, 하드웨어 및 소프트웨어도 필요한 경우에는 변경되어야 한다. 따라서 그러한 네트워크를 최적으로 설계하기 위해서는 시스템 동작을 확인하고 성능을 예측할 수 있는 센서 네트워크 시뮬레이터가 필요하다. 현존하는 몇몇 센서 네트워크 시뮬레이터들은 특정 하드웨어나 운영체제에 맞추어 개발되었기 때문에, 그러한 특정 시스템들을 위해서만 사용될 수 있다. 그리고 시스템 설계 상의 주요 이슈가 되는 전력 소모량 및 프로그램 실행 시간을 추정하기 위한 어떤 수단도 지원하지 못하고 있다. 이 연구에서는 기존의 센서 네트워크 시뮬레이터들이 갖고 있는 문제점을 해결한 시뮬레이터를 개발하고, 센서 네트워크의 계층적 라우팅 프로토콜인 LEACH, TEEN, APTEEN의 전력소모량을 시뮬레이션을 이용하여 분석하였다. 시뮬레이션의 작업부하인 명령어 트레이스로는 ATmega128L 마이크로컨트롤러용 크로스컴파일러에 의해 생성된 실행 이미지를 사용하였다. 따라서 각각의 라우팅 프로토콜을 실제 센서 보드에서 동작하는 응용 프로그램으로 구현하고, 컴파일된 실행 이미지를 작업부하로 사용하여 시뮬레이션 하였다. 라우팅 프로그램들은 ETRI의 센서 네트워크 운영체제인 Nano-Q+ 1.6.1을 기반으로 구현되었으며, 하드웨어 플랫폼은 옥타컴의 센서 보드인 Nano-24이다. 시뮬레이션 결과에 따르면, 센서 네트워크는 그 사용 목적에 따라 라우팅 프로토콜을 적절히 선택해야 한다는 것을 알 수 있다. 즉, LEACH는 주기적으로 네트워크의 상황을 체크해야 하는 경우에 적합하고, TEEN은 환경의 변화를 수시로 감지해야 하는 경우에 적합하다. 그리고 APTEEN은 전력소모량과 기능 측면을 모두 고려할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단에 사용될 수 있을 것으로 기대된다.리를 정량화 하였다. 특히 선조체에서의 도파민 유리에 의한 수용체 결합능의 감소는 흡연에 의한 혈중 니코틴의 축적 농도와 양의 상관관계를 보였다(rho=0.9, p=0.04). 결론: $[^{11}C]raclopride$ PET을 이용하여 비흡연 정상인에서 흡연에 의한 도파민 유리를 영상화 및 정량화 하였고, 흡연에 의한 선조체내 도파민 유리는 흡연시 흡수된

• Journal of Soil and Groundwater Environment
• /
• v.23 no.6
• /
• pp.90-103
• /
• 2018

Although fluoride is an essential trace element, ingestion of excessive amount of fluoride could have detrimental effect on human health. Generally, the bioavailability of fluoride in soils was low, but it could be harmful to the environment depending on the soil properties. Therefore, it is necessary to understand the concentration distribution, and fate and transport characteristics of fluoride to establish a resonable management strategy for fluoride pollution. This study was conducted to evaluate nationwide fluoride distribution in soils in Korea, as well as its fate and transport characteristics. The average background concentration was 204.5 (15.3~504.8) mg/kg, which is lower than the values of foreign soils. For the three regions of different land use, the average concentration was 229.6 mg/kg in region 1, 195.7 mg/kg in region 2, and 273.4 mg/kg in region 3. The concentration of fluoride was the highest in soils from Youngnam block within tectonic structure derived from metamorphic rocks. The results of sequential extraction to access F bioavailability showed fluoride in soils mainly existed as a residual form, which suggests the bioavailability of fluoride was relatively low. Soil properties such as soil pH, CEC, and clay content were found to affect F bioavailability of soil.