• 한국재료학회지
• /
• 제9권9호
• /
• pp.878-882
• /
• 1999

분자선증착법으로 (0001) 사파이어 기판 위에 $Al_xGa_1-_xN$ 에피층을 AlN 몰비를 변화시키면서 성장시켰다. AlN 몰비는 0.16에서 0.76까지 변화시켰으며 X선의 회절 실험과 Rutherford backscattering spectroscopy 방법을 이용하여 AlN 몰비를 결정하였다. $Al_xGa_1-_xN$ 에피층의 깊이 방향의 조성 변화를 관찰하였으며 스퍼터 시간에 대해 각 원소가 일정한 원자 농도를 가짐을 알 수 있었다. AlN 몰비의 증가에 따른 표면 특성의 변화를 관찰하기 위하여 atomic force microscopy 측정을 수행하였다. 표면에서의 입자 모양이 AlN 몰비가 변화함에 따라 원형에서 침상형태로 변화함을 알 수 있었다. 표면 입자에 대한 root mean square 값과 average roughness 값을 구하였으며 AlN 몰비를 바꿈에 따라 나타나는 변화를 관찰하였다.

• Applied Science and Convergence Technology
• /
• 제26권3호
• /
• pp.52-54
• /
• 2017

An InGaN/GaN multiple quantum well (MQW) structure is grown on a GaN/sapphire template using a plasma-assisted molecular beam epitaxy (PA-MBE). The fluctuation of the quantum well thickness formed from roughly-grown InGaN layer results in a disordered photoluminescence (PL) spectrum. The surface morphologies of the InGaN layers with various In compositions are investigated by reflection high energy electron diffraction (RHEED) and atomic force microscopy (AFM). A blurred InGaN/GaN hetero-interface and the non-uniform QW size is confirmed by high resolution transmission electron microscopy (HR-TEM). Inhomogeneity of the quantum confinement results in a degradation of the quantum efficiency even though the InGaN layer has a uniform In composition.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권2호
• /
• pp.96-101
• /
• 2003

Direct evidence on the incorporation of high concentration of oxygen into undoped AlGaN layers for the AlGaN/GaN heterostuctures is provided by scanning photoemission microscopy using synchrotron radiation. In-situ annealing at $1000^{\circ}C$ resulted in a significant increase in the oxygen concentration at the AlGaN surface due to the predominant formation of Al-O bonds. The oxygen incorporation into the AlGaN layers resulting from the high reactivity of Al to oxygen can enhance the tunneling-assisted transport of electrons at the metal/AlGaN interface, leading to the reduction of the Schottky barrier height and the increase of the sheet carrier concentration near the AlGaN/GaN interface.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.314.1-314.1
• /
• 2014

The properties of Ni/Au Ohmic contacts formed on nonpolar a-plane GaN grown on r-plane sapphire substrate with different tilt angles are investigated using current-voltage (I-V) measurements. To investigate the effects of pattern direction and size on Ohmic contact properties of a-plane GaN, transmission line method (TLM) patterns are formed either along c-axis and m-axis on nonpolar GaN surface with different size. I-V measurement results show that the size of TLM pattern and formation direction of electrode have an effect on the electrical properties of a-plane GaN. The large sized patterns show the relatively lower sheet resistance compared to the small sized patterns. In addition, the sheet resistance of a-plane GaN along m-axis shows lower values than that along the c-axis. Finally, the effects of miscut angle of r-sapphire substrate ($0.2^{\circ}$, 0.4oand $0.6^{\circ}$) on electrical properties of a-plane GaN will be discussed.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.418-425
• /
• 1995

The surface of GaAs was treated by using the 0.1M solution of N $a_{2}$S.9 $H_{2}$O. The passivation of the surface in this sample was investigated by the photoreflectance(PR) experiment. The surface electric field( $E_{s}$) and built-in voltage( $V_{bi}$ ) discussed from Franz-Keldysh oscillation of PR signals. The density of surface states and Fermi level of GaAs treated with N $a_{2}$S.9 $H_{2}$O for 40min were determined 1.61*10$^{12}$ c $m^{-2}$ and 0.73eV. These values were about 15 and 10% smaller than those in untreated sample.e.

• 센서학회지
• /
• 제31권4호
• /
• pp.271-277
• /
• 2022

We analyzed the effects of the interface trap on the output characteristics of an inversion mode n-channel GaN Schottky barrier (SB)-MOSFET based on the N_it distribution using TCAD simulation. As interface trap number density (N_it) increased, the threshold voltage increased while the drain current density decreased. Under N_it=5.0×10¹⁰ cm^-2 condition, the threshold voltage was 3.2 V for V_DS=1 V, and the drain current density reduced to 2.4 mA/mm relative to the non-trap condition. Regardless of the N_it distribution type, there was an increase in the subthreshold swing (SS) following an increase in N_it. Under U-shaped N_it distribution, it was confirmed that the SS varied depending on the gate voltage. The interface fixed charge (Q_f) caused an shift in the threshold voltage and increased the off-state current collectively with the surface trap. In summary, GaN SB-MOSFET can be a building block for high power UV optoelectronic circuit provided the surface state is significantly reduced.

• Transactions on Electrical and Electronic Materials
• /
• 제5권3호
• /
• pp.113-119
• /
• 2004

Structural and optical properties of as-synthesized, Ga$_2$O$_3$-coated, and Al$_2$O$_3$-coated GaN nanowires are examined in this paper. GaN nanowires were synthesized by thermal evaporation of ball-milled GaN powders in an NH$_3$ atmosphere. The thermal annealing of the as-synthesized GaN nanowires in an argon atmosphere allows their surfaces to be oxidized, leading to the formation of 2nm-thick Ga$_2$O$_3$ layers. For the oxidized GaN nanowires, the distances between the neighboring lattice planes are shortened, and an excitonic emission band is remarkably enhanced in intensity, compared with the as-synthesized GaN nanowires. In addition, the as-synthesized GaN nanowires were coated cylindrically with Al$_2$O$_3$ by atomic layer deposition technique. Our study suggests that the Al$_2$O$_3$-coating passivates some of surface states in the GaN nanowires.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.417-420
• /
• 2004

The electrical effects of dry-etch on n-type GaN by an inductively coupled $Cl_2/CH_4/H_2/Ar$ plasma were investigated as a function of ion energy, by means of ohmic and Schottky metallization method. The specific contact resistivity(${\rho}_c$) of ohmic contact was decreased, while the leakage current in Schottky diode was increased with increasing ion energy due to the preferential sputtering of nitrogen. At a higher rf power, an additional effect of damage was found on the etched sample, which was sensitive to the dopant concentration in terms of the ${\rho}_c$ of ohmic contact. This was attributed to the effects such as the formation of deep acceptor as well as the electron-enriched surface layer within the depletion layer. Furthermore, thermal annealing process enhanced the ohmic and Schottky property of heavily damaged surface.

• 한국결정성장학회지
• /
• 제30권1호
• /
• pp.1-6
• /
• 2020

본 연구에서는 패턴화된 사파이어 기판 위에 HVPE(Hydride Vapor Phase Epitaxy System) 법에 의해 50 nm 두께의 AlN thin film을 증착한 뒤, 에피층 구조가 MO CVD에서 성장되었다. AlN 버퍼층 박막의 표면형상이 SEM, AFM에 의해서, 에피층 구조의 GaN 박막의 결정성은 X-선 rocking curve에 의해 분석되었다. 패턴화된 사파이어 기판 위에 증착된 GaN 박막은, 사파이어 기판 위에 증착된 GaN 박막의 경우보다 XRD 피크 세기가 다소 높은 결과를 나타냈다. AFM 표면 형상에서 사파이어 기판 위에 AlN 박막이 증착된 경우, GaN 에피층 박막의 p-side 쪽의 v-pit 밀도가 상대적으로 낮았으며, 결함밀도가 낮게 관찰되었다. 또한, AlN 버퍼층이 증착된 에피층 구조는 AlN 박막이 없는 에피층의 광출력에 비해 높은 값을 나타냈다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.23-23
• /
• 2003

GaN-related semiconductors are of great technological importance for the fabrication of optoelectronic devices, such as blue and ultra violet light emitting diodes (LEDs), laser diodes, and photo-detectors. One of the most important applications of GaN-based LEDs is solid-state lighting, which could replace incandescent bulbs and ultimately fluorescent lamps. For solid-state lighting applications, the achievement of high extraction efficiency in LED structures is essential. For flip-chip LEDs (FCLEDS), the formation of low resistance and high reflective p-GaN contact is crucial. So far, a wide variety of different methods have been employed to improve the ohmic properties of p-type contacts to GaN. For example, surface treatments using different chemical solutions have been successfully used to produce high-quality ohmic contacts, Metallization schemes, such as Ta/Ti contacts to p-GaN, were also investigated. For these contacts, the removal of hydrogen atoms from the Mg atoms doped n the GaN was argued to be responsible for low contact resistances.