• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.111-116
• /
• 1998

Thirteen InGaAs/InGaAsP separate-confinement heterostructure multiple quantum well lasers were designed such that the strain in the active layer from 0.9% compressive strain to 1.4% tensile, and their threshold current density was caluculated to see the effects of strain on the threshold current density. The well width was adjusted such that the bandgap of the quantum well is 1.55 ${\mu}{\textrm}{m}$, For the calculation of the band structure and transition matrix element needed for the gain calculation, a block diagonalized 8$\times$8 second-order $\to{k}.\to{p}$ Hamiltonian was used to incorporate the conduction band nonparabolicity and the valence band mixing. The threshold current density shows discontinuity at 0.4% tensile strain where the first heavy-hole subband and the first light-hole subband cross and at 0.5% tensile strain where the second conduction subband begins to exist. The threshold current density at room temperature has a maximum around these 0.4-0.5% tensile strains, and as strain varies in either direction it decreases first and then increases a little after a local minimum. This calculated trend is consistent with the other reported experimental results. We discussed the results of this calculation in comparison with other theoretical or experimental papers on the effect of strain.

• Electrical & Electronic Materials
• /
• v.12 no.8
• /
• pp.18-23
• /
• 1999

InP 소자 기술은 밀리미터파 회로 제작에 지금까지 개발된 기술 중 가장 경쟁력 있는 기술로 InP HEMT와 HBT를 이용하여 100㎓ 이상의 회로가 만들어지고 있다. GaAs 소자 기술에 비해 InP 소자기술은 주파수 특성과 잡음특성, 집적도에 있어서 우수하나 반면에 V-band 이하의 주파수에서 전력특성이 나쁘며, 가격이 비싼 단점이 있다. V-band 이상의 고주파 대역에서 InP 소자기술은 대부분의 면에서 GaAs 소자기술을 능가하여 극초고주파에서 적용가능한 유일한 소자기술이 된다. 본 논문에서는 InP 소자 기술에 대한 기본적인 내용과 응용 예를 소개한다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.4
• /
• pp.22-27
• /
• 1992

The cyclic voltammogram characteristics at the magnetized SrO${\cdot}6Fe_{2}O_{3}$ ceramics/(($10^{-3}$M KCI + p-Si powders) and /(($10^{-4}$M CsNO$_3$ + n-GaAs powders) suspension interfaces have been studied using the microelectrophoresis and the cyclic voltammetric method. The negatively charged ions are specifically absorbed on the virgin and the magnetized SrO${\cdot}6Fe_{2}O_{3}$ ceramics surfaces. The zeta potentials of the p-Si and n-GaAs colloidal semiconductors are + 41mV and -44.8mV, respectively. The magnetization effects act as potential barriers at the magnetized SrO${\cdot}6Fe_{2}O_{3}$ interfaces. The positivelely charged p-Si and the negatively charged n-GaAs colloidal semiconductors act as potential barriers at the virgin SrO${\cdot}6Fe_{2}O_{3}$ interfaces. On the other hand, the charged p-Si and n-GaAs colloidal semiconductors act as potential barrier scavengers at the magnetized SrO${\cdot}6Fe_{2}O_{3}$ interfaces. The magnetization effects and the charged colloidal semiconductor effects are irreversible and interdependent.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.6
• /
• pp.363-366
• /
• 2010

Identification of compounds that function as P-glycoprotein (P-gp) substrates or inhibitors can facilitate the selection and optimization of new drug candidates. The purpose of this study is to optimize the experimental conditions for in vitro P-gp assay using LLC-GA5 cells, which is a well-known transformant cell line derived by transfecting LLC-PK1 with human MDR1. The amount of rhodamine123 transported by the LLC-GA5 and LLC-PK1 cells was evaluated under the following experimental conditions: 3 different types of transport media, colchicine pretreatment or nontreatment of the cells in the culture media, and with and without poly-L-lysine coating of the culture plates. The assay sensitivity was found to considerably differ depending on the diluents used in the transport media. P-gp-mediated transport in LLC-GA5 cells was most clearly characterized in the Hanks' balanced salt solution based transport media. The sensitivity of P-gp-mediated transport was not changed by colchicine pretreatment or poly-L-lysine coating of the culture plates.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.06a
• /
• pp.91-92
• /
• 1998

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.363-364
• /
• 2012

기존 양자점에 대한 연구는 레이저 다이오드와 광증폭기등과 같은 광소자의 활성층에 사용되던 양자우물을 대체하기 위하여 고밀도, 고균일 양자점 성장에 관한 연구가 활발히 진행되었지만, 최근에는 양자점을 이용한 Single-photon source의 관심이 높아짐에 따라 저밀도 양자점 성장에 관한 연구가 주목 받고 있다. 본 연구에서는 수직형 저압 Metal organic chemical vapor deposition (MOCVD)를 이용하여 InP 기판 위에 저밀도 InAs 양자점을 성장하였다. 저밀도의 양자점을 성장하기 위하여 양자점과 덮개 층($1.1 {\mu}m$ InGaAsP)사이에 V족 원료 가스인 As만 공급하는 성장 중단 시간 (GI:Growth interruption)을 삽입하였다. 시료의 구조는 InP (100)기판위에 50 nm InGaAsP barrier, 1.5ML GaAs를 성장 후 InAs 1.9 ML를 성장하였다. 그 후 0, 1, 2, 5 분의 GI을 삽입한 후 InGaAsP 와 InP 덮개층을 성장하였다. 양자점의 밀도와 형상을 측정하기 위하여 Atomic force microscopy (AFM)을, 광학적 특성 분석을 위하여 저온 Micro Photoluminescence (${\mu}$-PL)을 측정하였다. 성장 중단 시간의 증가에 따라 InAs/InP 양자점의 높이와 넓이는 증가하고 밀도는 감소하였다. 성장 중단 시간 3분 이후에는 밀도 감소가 둔화 되었으며, 5분일 때 $3.2{\times}10^7/cm^2$의 극저밀도 InAs/InP 양자점이 성장되었다. 또한 저밀도 양자점 시료의 저온 ${\mu}$-PL을 측정하여 단일 양자점의 exciton과 bi-exciton peak가 측정되었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.506-514
• /
• 1998

The design and fabrication of X-band(11.7~12 GHz) 2-stage monolithic microwave integrated circuit(MMIC) low noise amplifier (LNA) for active antenna are presented using $0.15{\mu}m\times140{\mu}m$ AlGaAs/InGaAs/GaAs pseudomorphic high electron mobility transistor (P-HEMT). In each stage of the LNA, a series feedback by using a source inductor is used for both input matching and good stability. The measurement results are achieved as an input return loss under -17 dB, an output return loss under -15dB, a noise figure of 1.3dB, and a gain of 17 dB at X-band. This results almost concur with a design results except noise figure(NF). The chip size of the MMIC LNA is $1.43\times1.27$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.71-80
• /
• 2007

This paper presents a new push-push VCO technique that extracts a second harmonic output signal from a capacitive commonnode in a negativegm oscillator topology. The generation of the $2^{nd}$ harmonics is accounted for by the nonlinear current-voltage characteristic of the emitter-base junction diode causing; 1) significant voltage clipping and 2) different rising and falling time during the switching operation of core transistors. Comparative investigations show the technique is more power efficient in the high-frequency region that a conventional push-push technique using an emitter common node. Prototype 12GHz and 17GHz MMIC VCO were realized in GaInP/GaAs HBT technology. They have shown nominal output power of -4.3dBm and -5dBm, phase noise of -108 dBc/Hz and -110.4 dBc/Hz at 1MHz offset, respectively. The phase noise results are also equivalent to a VCO figure-of-merit of -175.8 dBc/Hz and -184.3 dBc/Hz, while dissipate 25.68mW(10.7mA/2.4V) and 13.14mW(4.38mA/3.0V), respectively.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.29-33
• /
• 2002

본 논문은 자기 바이어스(self bias)를 이용한 PCS 대역용 하이브리드 전력 저잡음 증폭기(power LNA) 모듈에 관한 것으로 GaAs p-HEMT 칩을 세라믹 기판에 실장하여 와이어 본딩과 주변 매칭을 통해 고주파 손실을 줄이고 온도 변화에 대한 안정성과 1.2㏈의 저잡음, 21~23㏈m의 P$_1$㏈를 실현하였다. 10mm$\times$10mm 크기로 표면 실장이 되도록 단자를 cut-line 형태로 모듈화 하여 안정성과 신뢰성을 향상시켰고 또한 저가격화를 실현하였다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.91-97
• /
• 1998

The modulation performance of 10 Gbps electro-absorption InGaAsP/InGaAsP strain compensated MQW (Multiple Quantum Well) modulator module depends on the modulator as well as the package parasitics. The high frequency package parasitics resulting from various structural discontinuities, limit the modulation bandwidth and increase the chirp-parameter. Therefore, we propose the double bondwires embedded in dielectric materials to minimize the bondwire parasitics. Using the proposed structure with 50 $\Omega$ terminating resistor, the modulation bandwidth is greatly increased by 125 % than the bare chip and the chirp-parameter is also reduced. This technique can be used in optimizing the package of high speed external modulators.