• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.2
• /
• pp.94-100
• /
• 1985

M/S Pusan 403(GT 243, 1000ps) was originally built as a research vessel on skipjack pole and line fishing in 1972. She had begun to serve as a fishing training ship of National Fisheries University of Pusan from 1974, since the interior structure has been remodelled and some weight articles have been removed, her stability is in doubt. The authors carried out an inclining experiment by using two pendulums at fore and aft with two weights on both sides. Each value obtained was compared with the IMO safety code for fishing vessels and safety regulation for fishing vessels of Korea. 1. The GZ value, being 0.207 m under light ship condition and 0.325 m under departure condition with full load, can be assumed as no impediment on her stability, 2. Under the light ship condition, GM decreased by 0.046 m and KG increased by 0.141 m, compared with the values determined at the time of official sea trial. Therefore, no impediment on the stability exists. 3. The GM decreased by 0.163 m and the KG increased by 0.173 m, compared with the values determined at the time of official sea trial. In no consideration of the free surface effects of liquid in the oil and fresh water tanks, no impediment on the stability exists. But, in consideration of the free surface effect, it may be regarded that some impediment exists.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.551-557
• /
• 2013

In this paper, we manufactured portable inflatable kayak using ultra high pressure drop stitch. by improving inflatable kayaks' performance with a design using the extra-high-voltage special space paper, they were manufactured to go near to performance of hard shell kayaks. The kayaks were manufactured having all merits of the performance of hard shell kayaks and functionality and portability of the inflatable kayaks, and through performance evaluation of test products, the performance was compared with previous hard shell kayaks. About 6 knot of target speed in the verification result of resistance performance, the developed kayak was more excellent than the HOBIE-KONA kayak by 12.33%. In case of same displacement in a result of inclination test, the centroid of the developed kayak was less distributed by 22.7% than the HOBIE-KONA kayak, based on the bottoms of the ships. This makes the difference for righting arm (GZ) lessened to some degree because the developed kayak is lower than the HOBIE-KONA kayak in the centroid. In the dynamic stability of ship bodies, the HOBIE-KONA kayak showed a little excellent performance. However, in rudder force and resistance factor, the developed kayak was more outstanding than the HOBIE-KONA kayak.

• Preventive Nutrition and Food Science
• /
• v.8 no.3
• /
• pp.284-288
• /
• 2003

In this study, we investigated the effects of green tea and Pueraria radix tea on the production of Apo B$_{100}$ in Hep G$_2$ liver cells and on the expression of the low density lipoprotein (LDL) receptor. Treatment with green tea resulted in a 60.7% decrease on the Apo B$_{100}$ concentration in Hep G$_2$ cells. Pueraria radix tea decreased Apo B$_{100}$ concentration by 63.5% in Hep G$_2$ cells. Green tea and Pueraria radix tea significantly decreased Apo B$_{100}$ concentration by 64.8% and 61.8%, respectively, in the media. Treatment of the cells with green tea and Pueraria radix tea also significantly decreased the intracellular total cholesterol, but total cholesterol concentrations in the media increased by 26.4% (green tea) and 23.6% (Pueraria radix tea) above that measured in the media of control cells. The addition of green tea and Pueraria radix to the media of the Hep Gz cells increased the LDL receptor binding activities by 84.1% and 79.4%, respectively.

• Journal of Food Hygiene and Safety
• /
• v.13 no.1
• /
• pp.41-46
• /
• 1998

A postcolumn derivatization method was tried for the simultaneous determination of four major aflatoxins ($B_1,\;B_2,\;G_1,\;and\;G_2$) by high-performance liquid chromatography with fluorescence detection. As compared with a previous precolumn derivatization method, it was found that the postcolumn derivatization combined with an electrochemical cell (Kobra cell) was less time-consuming, safer, improved the sensitivity and selectivity, and provided good recoveries for aflatoxin $B_1$ (88.9%) and $G_1$ (100.5%). This method showed linearity from 10~100 ppb for aflatoxin $B_1\;and\;G_1$, and from 3~30 ppb for aflatoxin $B_2\;and\;G_2$. However, aflatoxin Bz and Gz were not detected satisfactorily although they showed good resolution.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.89-89
• /
• 2011

a-GIZO(비정질 Ga-In-Zn-O)박막은 유연하며 광학적으로 투명하고 높은 전자의 이동도를 갖는 반도체적 특성을 갖기 때문에 차세대 display분야에서 TFT(Thin-Film-Transistor)의 high speed active-matrix layer로써 각광을 받고 있다. 이 물질의 표면은 환경 및 표면처리에 매우 민감하며 [1,2], 이 표면에 metal이 증착되는 경우에도, 선행 연구에 의하면, 다양한 chemical state가 나타남을 알 수 있었다. 이것은 metal의 증착에 따라 metal과 a-GIZO 사이의 contact 저항이 달라짐을 의미한다. 우리는 a-GIZO 박막 위에 Au를 단계적으로 증착시키면서, Au coverage 증가에 따른 core-level과 valence에서의 x-ray photoelectron spectra의 변화를 살펴봄으로써 a-GIZO박막과 Au의 계면에서 일어나는 chemical state의 변화를 알 수 있었다. 특히, Au deposition의 전 처리과정으로써 Ne ion sputtering을 두 단계로 다르게 하여 a-GIZO의 표면환경에 따른 Au 증착의 영향을 살펴보았다.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.195-206
• /
• 2014

Heat transfer characteristics in a narrow rectangular channel are experimentally investigated for upward and downward flows. The experimental data obtained are compared with existing data and predictions by many correlations. Based on the observations, there are differences from others: (1) there are no different heat transfer characteristics between upward and downward flows, (2) most of the existing correlations under-estimate heat transfer characteristics, and (3) existing correlations do not predict the high heat transfer in the entrance region for a wide range of Re. In addition, there are a few heat transfer correlations applicable to narrow rectangular channels. Therefore, a new set of correlations is proposed with and without consideration of the entrance region. Without consideration of the entrance region, heat transfer characteristics are expressed as a function of Re and Pr for turbulent flows, and as a function of Gz for laminar flows. The correlation proposed for turbulent and laminar flows has errors of ${\pm}18.25$ and ${\pm}13.62%$, respectively. With consideration of the entrance region, the heat transfer characteristics are expressed as a function of Re, Pr, and $z^*$ for both laminar and turbulent flows. The correlation for turbulent and laminar flows has errors of ${\pm}19.5$ and ${\pm}22.0%$, respectively.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.246-259
• /
• 2021

IMO stability regulations include various stability parameters such as GM values. To assess the stability of the ships, we should check all stability parameters of the IMO requirements. However, since this process is complex, a more convenient way to evaluate stability performance is required. In this research, the index for marine ship intact stability assessment (IMSISA) model was developed to solve these problems. The IMSISA model consists of a stability index calculation module and a stability assessment module. In the stability index calculation module, ten stability parameters, including GM, were used to develop the stability index, which has the advantage of being able to quantify the ship stability. The stability assessment module uses the stability index value to determine the stability status of the ship and provides the captain with stability management guidelines. To verify the proposed model, the basic stability calculations were performed for two model ships in 32 loading situations. The proposed model was found to provide better performance in the stability assessment than the previous study. By applying the IMSISA model to the ships, the captain can assess the ship stability more quantitatively and efficiently.

• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.1-7
• /
• 2014

For the resistance spot welds of CR1180 and GA1180 TRIP steels, the weld quality evaluation method using the digitalized X-ray transmission imaging apparatus was investigated in comparison with the crosssectional examination method. In the case of the resistance spot welding of CR1180, three circular regions, such as WZ(white zone), GZ(grey zone) and DZ(dark zone), appeared on X-ray image and they corresponded to the diameters of indentation mark, nugget and corona bond, respectively. The variation of X-ray transmission thickness due to the thickness variation of the weld seemed to be mainly responsible for the formation of those contrasts. The X-ray image contrast formed from the variation of transmission thickness at the outer border line of DZ could also enable the inspections of the notch shape, nonuniformity of the welding pressure and spatter from its sharpness, concentricity and the normal straight line, respectively. The X-ray image of the resistance spot weld of galvannealed GA1180 TRIP steel was very similar to that of CR1180 TRIP steel except the crown shaped outer border line of DZ which was considered to be due to the melting behavior of zinc having the boiling temperature even lower than the melting temperature of steel.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.7
• /
• pp.911-915
• /
• 2013

The aim of this study was to investigate allele frequencies at the CSN1S2 locus in two Chinese dairy goat breeds and the effects of its variation on dairy goat economic traits. Seven hundred and eight goats from Xinong Saanen (XS, n = 268) and Guanzhong (GZ, N = 440) breeds were selected. The milk samples of 268 XS goats were collected during the middle of lactation, body size parameters (708 goats) and daily milk yield (202 goats) were registered. The RFLP (restriction fragment length polymorphism) and SSCP (single strand conformation polymorphism) were used to detect the polymorphisms in CSN1S2. The Hardy-Weinberg (HW) equilibrium and the associations between body size, milk yield and composition and the genotypes were calculated. The results revealed that only A and F CSN1S2 alleles were found in the two Chinese dairy goat breeds. Allelic frequencies of A and F were 0.795, 0.205 and 0.739, 0.261 in Xinong Saanen and Guanzhong population respectively. Xinong Saanen breed was in Hardy-Weinberg equilibrium, while Guanzhong breed deviated from Hardy-Weinberg equilibrium (p<0.05). The association of polymorphism with economic traits indicated that the goats with FF genotype have higher milk fat and total solid concentration than those with AA and AF genotypes (p<0.05).

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.135-142
• /
• 2016

Purpose: The aim of this research was to evaluate the influence of different surface treatments on the shear bond strength of zirconia ceramic to composite resin. Methods: Seventy two cylinder-shape (diameter: 5 mm; height: 12 mm) blocks of experimental industrially manufactured Y-TZP ceramic were abraded with $125{\mu}m\;Al_2O_3$ particles and randomly divided into 4 groups. All the materials were categorized as group Gc(control group - composite resin veneering on zirconia surface), Gr - composite resin veneering after surface treatment of Rocatec system (3M ESPE, Seefeld, Germany) group; Gz - composite resin veneering after surface treatment of Zirconia primer (Z-primer, Bisco, U.S.A) group; Gm - composite resin veneering after surface treatment of zirconia primer (Monobond plus, ivoclar vivadent AG, Liechtenstein) group. Two different zirconia primers and Rocatec system were used to zirconia cylinders (n=16) onto the zirconia surface. Zirconia specimens, polished and roughened, were pretreated and composite bilayer cylinders bonded using conventional adhesive techniques. Results: Shear bond strengths were analyzed using single-factor ANOVA(p<0.05). Bond strength values achieved after airbone particle abrasion and zirconia surface pre-treatments(p<0.05). Conclusion: Shear bond strength tests denmonstrated that zirconia primer is a viable method to improved bond strength between zirconia ceramic core and veneering composites.