• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.103-113
• /
• 2015

This paper studies impact performance of wire-mesh and steel fiber-reinforced concrete based on high-velocity impact experiments using hard spherical balls. In this experimental study, panel specimens were tested with various parameters such as steel fiber volume fraction, presence/absence of wire mesh, panel thickness, impact velocity, and aggregate size for the comparison of impact resistance performance for each specimen. While improvement of the impact resistance for reducing the penetration depth is barely affected with steel fiber volume fraction, the impact resistance to scabbing and perforation is improved substantially. This was due to the fact that the steel fiber had bridging effects in concrete matrix. The wire mesh helped minimizing the crater diameter of front and back face and enhanced the impact resistance to scabbing and perforation; however, the wire mesh did not affect the penetration depth. The wire mesh also reduced the bending deformation of the specimen with wire mesh, though some specimens had splitting bond failure on the rear face. Additionally, use of 20 mm aggregates is superior to 8 mm aggregates in terms of penetration depth, but for reducing the crater diameter on front and back faces, the use of 8 mm aggregates would be more efficient.

• Imaging Science in Dentistry
• /
• v.35 no.2
• /
• pp.91-96
• /
• 2005

Purpose : To investigate the change of bone healing process after endodontic treatment of the tooth with an apical lesion by fractal analysis. Materials and Methods Radiographic images of 35 teeth from 33 patients taken on first diagnosis, 6 months, and 1 year after endodontic treatment were selected. Radiographic images were taken by JUPITER Computerized Dental X-ray $System^{(R)}$. Fractal dimensions were calculated three times at each area by Scion Image $PC^{(R)}$ program. Rectangular region of interest $(30\times30)$ were selected at apical lesion and normal apex of each image. Results : The fractal dimension at apical lesion of first diagnosis $(L_0)$ is $0.940{\pm}0.361$ and that of normal area $(N_0)$ is $1.186{\pm}0.727(p<0.05)$. Fractal dimension at apical lesion of 6 months after endodontic treatment $(L_1)$ is $1.076{\pm}0.069$ and that of normal area $ (N_1)$ is $1.192{\pm}0.055(p<0.05)$. Fractal dimension at apical lesion of 1 year after endodontic treatment $(L_2)$ is $1.163{\pm}0.074$ and that of normal area $(N_2)$ is $1.225{\pm}0.079(p<0.05)$. After endodontic treatment, the fractal dimensions at each apical lesions depending on time showed statistically significant difference. And there are statistically significant different between normal area and apical lesion on first diagnosis, 6 months after, 1 year after. But the differences were grow smaller as time flows. Conclusion : The evaluation of the prognosis after the endodontic treatment of the apical lesion was estimated by bone regeneration in apical region. Fractal analysis was attempted to overcome the limit of subjective reading, and as a result the change of the bone during the healing process was able to be detected objectively and quantitatively.

• Sleep Medicine and Psychophysiology
• /
• v.17 no.2
• /
• pp.85-90
• /
• 2010

Objectives: Ginseng has a long history of being used in insomnia treatment and there is some evidence from animal studies of its sleep-enhancing property. From this, it can be assumed that ginseng has sleep-promoting effect in humans. The purpose of this study was to investigate the effect of Korean red ginseng on change of sleep architecture in humans. Methods: A total of 20 healthy young males with regular sleep and wake habits and without any psychiatric nor cognitive problems were selected based on review of sleep questionnaires and sleep diaries they completed followed by an interview with a board-certified psychiatrist. The subjects were randomly assigned to red ginseng or placebo for 2 weeks of trial. The total daily dose of ginseng was 4,500 mg. The polysomnographic recordings were made at baseline and at 2 weeks after. The effects of red ginseng and placebo on sleep were assessed by comparing the changes in polysomnographic variables between the two groups. Results: A total of 15 subjects, 8 from red ginseng group and 7 from placebo group, were included to undergo polysomnographic procedures. The red ginseng group showed tendencies to increase stage 3 sleep (p=0.087) and to decrease stage 2 sleep (p=0.071) from the baseline compared with the placebo group. Conclusion: Korean red ginseng tends to increase deep sleep and decrease shallow sleep. Our result is in line, at least in part, with previous findings that Korean red ginseng increased total and NREM sleep in rats. Further studies with higher ginseng dosage, larger sample size and longer trial duration should be conducted to confirm the sleep stabilizing and balancing effects of Korean red ginseng.

• Sleep Medicine and Psychophysiology
• /
• v.15 no.1
• /
• pp.39-43
• /
• 2008

Objectives: The pathophysiology of restless legs syndrome (RLS) is not obvious, but many promising theories involve dopaminergic deficiency and genetic causes. The RLS is presumed to occur more frequently among schizophrenic patients who take antipsychotics, most of which blocks the dopamine receptors. This study aimed to investigate whether dopamine transporter gene (DAT1) 40 base pair (bp) variable number of tandem repeat (VNTR) polymorphism is associated with the antipsychotic-induced RLS in schizophrenia. Methods: We determined the diagnosis of RLS among the 190 Korean schizophrenic patients by the diagnostic criteria of the International Restless Legs Syndrome Study Group (IRLSSG). Genotyping was performed for the 40bp VNTR in DAT1 gene using polymerase chain reaction. Results: We separated the schizophrenic patients into 44 patients with RLS and 146 patients without RLS. The genotype and allele frequencies did not differ significantly between two groups. Conclusions: These results suggest that DAT1 gene 40bp VNTR is not associated with the antipsychotic-induced RLS in schizophrenia. To confirm these results, larger-scale association study is needed in the future.

• Sleep Medicine and Psychophysiology
• /
• v.14 no.1
• /
• pp.26-32
• /
• 2007

Objectives: Angiotensin-converting enzyme (ACE) gene polymorphism has been reported to be associated with depression and therapeutic outcome in depression. The purpose of this study was to determine whether ACE gene polymorphism is associated with seasonal variation in mood and behavior in a young Korean college student sample. Methods: 297 young Korean medical students were recruited in this study. All subjects were free of major medical and psychiatric problems. They were genotyped for the ACE gene polymorphism and evaluated the seasonal variation in mood and behavior by the Seasonality Pattern Assessment Questionnaire (SPAQ). Results: Global Seasonality Score (GSS) of SPAQ between three genotypes were not different. However, comparison of the group that showed seasonality of mood and behavior during winter with the group that did not showed seasonality indicated significant difference in genotype distribution ($x^2=6.79$, p=0.034). The D allele non-carrier (ll genotype) frequency was significantly higher in winter seasonality group than non-seasonality group ($x^2=6.59$, p=0.010；odds ratio [OR]=2.27, 95% confidence interval [CI] 1.20-4.28). Conclusion: These results suggest that the ACE gene polymorphism is related to winter-type seasonality in a Korean population.

• Journal of the Korea Concrete Institute
• /
• v.28 no.6
• /
• pp.637-646
• /
• 2016

In this study, slant shear tests for the prism specimens strengthened with ultra-high performance fiber reinforced concrete (UHPFRC), normal- and high-strength concrete were performed to evaluate the interfacial shear strength between old and new concrete substrate. Test parameters are the roughness of surface, concrete strength, and fiber volume fraction of UHPFRC. The surface of the concrete was roughened by shot blasting. Test results showed that the adhesion bond resistance of the specimen with a roughened surface was very large compared to that of the specimen with a smooth surface. In addition, the interfacial shear strength appeared to be affected by the concrete strength rather than the fiber volume fraction. For the roughened surface by shot-blasting method, interfacial shear resistance exceeded the upper limit which is presented in current design codes even if the shear-friction reinforcements are not provided. Based on the test results, it is applicable to use the current concrete design codes to achieve the shear-friction design for the interface between conventional concrete and UHPFRC. However, for the surface which is not processed, it would be appropriate to provide additional shear-friction reinforcement.

• Journal of the Korea Concrete Institute
• /
• v.29 no.1
• /
• pp.53-64
• /
• 2017

Ultra-high performance fiber-reinforced concrete (UHPFRC) is characterized by a post-cracking residual tensile strength with a large tensile strain as well as a high compressive strength. To determine a material tensile strength of UHPFRC, three-point loading test on notched prism and direct tensile test on doubly notched plate were compared and then the design tensile strength is decided. Shear tests on nine I-shaped beams with varied types of fiber volume ratio, shear span ratio and size effect were conducted to investigate shear behavior in web. From the test results, the stress redistribution ability represented as diagonal cracked zone was quantified by inclination of principal stress in web. The test results shows that the specimens were capable of resistance to shear loading without stirrup in a range of large deformation and the strength increase with post-cracking behavior is stable. However at the ultimate state all test specimens failed as a crack localization in the damaged zone and the shear strength of specimens is affected by shear span ratio and effective depth. Strength predictions show that the existing recommendations should be modified considering shear span ratio and effective depth as design parameters.

• Sleep Medicine and Psychophysiology
• /
• v.21 no.1
• /
• pp.29-32
• /
• 2014

Objectives: The aim of current study is to evaluate the relationship between sleep, suicide and serotonin using some scales and loudness dependence of auditory evoked potentials (LDAEP). Methods: Total 65 patients who met the criteria for major depressive disorder were enrolled in current study. The patients were divided into two subgroups according to their insomnia and a history of suicide attempts. The auditory event-related potentials were measured to evaluate LDAEP before beginning antidepressants. Results: The scores of total Beck Depression Inventory (BDI) and BDI item 9 (suicide) were higher in insomnia subgroup than non-insomnia subgroup (respectively, p=0.0033 and p=0.03). However, LDAEP did not differ each other. The subgroup with a history of suicide attempts had a higher score of BDI item 9 than the subgroup without a history of suicide attempts (p=0.00012). There was a tendency for the LDAEP to be higher in the subgroup with a history of suicide attempts ($1.39{\pm}0.94{\mu}V$) than the sub-group without a history of suicide attempts ($1.05{\pm}0.75{\mu}V$), although the difference was not statistically significant (p=0.078). Conclusion: Suicidality was related to insomnia. In addition, there was a tendency for serotonin activity to be lower in the subgroup with a history of suicide attempts. In future, more studies are needed.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.505-510
• /
• 2012

The gas hold-up has a strong relationship with the size distribution and rising velocities of bubbles in a bubble column. Therefore, many previous researchers have studied on the hydrodynamics focusing on the bubble size variation in bubble column. In this study, the bubble behavior was influenced by partitioning porous plates installed at a certain height in a trayed bubble column. The gas hold-up was increased in non-sparging region (H/D > 5) as well as sparging region. We identified the effect of the partitioning porous plate using three trayed bubble columns with different reactor geometries. Furthermore, the bubble break-up frequency and size distribution were observed before and after individual bubbles penetrated through the plate. The arrangement of the plates was also investigated using a 0.15-m-in-diameter bubble column. Based on the result, we applied this design concept to a 0.36-m-in-diameter, 22 m tall trayed bubble column and identified the effect of the partitioning porous plate on the gas hold-up increase.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.821-831
• /
• 2013

As a result of recent research, it is reported that the periodic replacements criterion of rails is able to extend as grinding rail surface and using the continuous welded rail (CWR). In this study, we carried out fatigue tests on existing laid rails. Based on the test results, an S-N curve expressing the remaining life of laid rails at a fracture probability of 50% was obtained using weighted probit analysis suitable for small-sample fatigue data sets. As rails used for testing had different histories in terms of accumulated tonnage, the test data were corrected to average out the accumulated tonnage. We estimated the remaining service lives for laid rails on the urban railway using equations developed in the past to estimate rail base bending stress and that surface irregularities into consideration. Therefore, estimating the remaining service life of laid rails showed that the rail replacement period could be extended over 200 MGT, although it is necessary to remove longitudinal rail surface irregularities at welds by grinding. Also, the fatigue test results under fatigue limit, Haibach's rule appling half slope of S-N curve under the fatigue limit was considered more reasonable than modified Miner's rule for estimating rail fatigue life.