• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.38-46
• /
• 2010

For the development of 100[W] stage lighting, quantitative and uniform color mixing that applied through color adopted Simple-Inverse matching so that color mixing can be possible along Black Body Locus. R,G,B(Red, Green, Blue) LED(Light Emitting Diode) arrangement through LED package character analysis, LED module, and the characteristic of device were considered for uniform color mixing. A distance changeable optical device was built to assure high uniformity and high diffusion of not only the middle of diffusion side but also the border side. Also, we developed the control power circuit that can expand up to 6 channels which are possible for quantitative color mixing, and the high uniformity and high quantified border light for color mixing control and the verification of color mixing characteristics by composing GUI(Graphical user interface) including color mixing simulator. By presenting the experimental results of light color control, we proved the usefulness of our developed border light and the proposed color mixing method.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1053-1058
• /
• 2010

A large modern wind farm should satisfy the requirements for a grid and accomplish the optimization of the wind farm system. The wind farm intertie protection system should consider a Fault Ride-Through (FRT) requirement for more reliable protection. The wind farm should keep connected to the grid in the case of a grid fault whilst it should be isolated for an intertie fault. This paper proposes a distance relaying algorithm suitable for wind farm intertie protection considering the FRT requirement. The proposed algorithm estimates the impedance based on a differential equation method because the frequency of the voltage and current deviates the nominal frequency. The algorithm extends the reach of Zone 1 up to 100 % of the length of the intertie to implement the FRT requirement. To discriminate an intertie fault from a grid fault, the algorithm uses a voltage blocking scheme because the magnitude of the voltage at the relaying point for an intertie fault becomes less than that for a grid fault. The performance of the algorithm is verified using a PSCAD/EMTDC simulator under various fault conditions. The algorithm can discriminate successfully the intertie fault from grid fault and thus helps to implement the FRT requirement of a wind farm.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.260-266
• /
• 2012

Syngas and hydrogen from the $CeO_2/ZrO_2$ coated foam devices were investigated under simulated solar radiation. The $CeO_2/ZrO_2$ coated SiC, Ni and Cu foam device were prepared using drop-coating method. Syngas production step was performed at $900^{\circ}C$, and hydrogen production process was performed for ten repeated cycles to compare the CeO2 conversion in syngas production step, $H_2$ yield in hydrogen production step and cycle reproducibility. The produced syngas had the $H_2$/CO ratio of 2, which was suitable for methanol synthesis or Fischer-Tropsch synthesis process. In addition, syngas and hydrogen production process is one of the promising chemical pathway for storage and transportation of solar heat by converting solar energy to chemical energy. After ten cycles of redox reaction, the $CeO_2/ZrO_2$ was analyzed using XRD pattern and SEM image in order to characterize the physical and chemical change of metal oxide at the high temperature.

• 한국태양에너지학회 논문집
• /
• 제27권1호
• /
• pp.75-81
• /
• 2007

Steam reforming of methane using Xe-arc solar simulator was studied for the application of concentrated solar energy into chemical reaction. The reactor, a volumetric absorber, consisted of a porous ceramic foam disk coated with commercial reforming catalyst. Operating temperature was in the range of $450\;-\;550^{\circ}C$ and the excess steam ratio to methane was from 3.0 to 5.0. At the steady-state condition, the conversion of methane Increased with temperature in the range of 15 % - 30 % and the experimentally determined conversion was found to be close to theoretical equilibrium conversion. It was also found that the CO selectivity slightly decreased with excess steam ratio. Finally, the conversion of methane decreased significantly with space velocity of reactants.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.22-27
• /
• 2012

Correct and fast detection of a micro-grid (MG) islanding is essential to the MG since operation, control and protection of the MG depend on an operating mode i.e., an interconnected mode or an islanding mode. When islanding occurs, the frequency of the point of common coupling (PCC) is not the nominal frequency during the transient state owing to the frequency rise or drop of generators in the MG. Thus, the active and reactive power calculated by the frequency domain based method such as Fourier Transform might contain some errors. This paper proposes an islanding detection algorithm for the MG based on the instantaneous active and reactive powers delivered to the dedicated line in the time domain. During the islanding mode, the instantaneous active and reactive powers delivered to the dedicated line are constants, which depend on the voltage of the PCC and the impedance of the dedicated line. In this paper, the instantaneous active and reactive powers are calculated in the time domain and used to detect islanding. The performance of the proposed algorithm is verified under various scenarios including islanding conditions, fault conditions and load variation using the PSCAD/EMTDC simulator. The results indicate that the algorithm successfully detects islanding for the MG.

• 대한전자공학회논문지SD
• /
• 제38권12호
• /
• pp.25-35
• /
• 2001

복잡한 thin film transistor-liquid crystal display (TFT-LCD) array 회로의 전기적 특성을 분석하기 위해서는 PSPICE나 AIM-SPICE와 같은 회로 시뮬레이터를 사용하는 것이 필수적이다. 본 논문에서는 SPICE 시뮬레이션을 위한 다결정 실리콘 (poly-Si) TFT 소자의 입력 변수 추출을 체계화하는 방법을 도입한다. 이 방법을 excimer laser annealing 및 silicide mediated crystallization 방법으로 각각 제작된 다결정 실리콘 TFT 소자에 적용하여 실험 결과와 잘 일치하는 결과를 얻었다. SPICE 시뮬레이터 중에서 PSPICE는 graphic user interface(GUI) 방식의 편의성을 제공하므로 손쉽게 복잡한 회로를 구성할 수가 있다는 장점이 있으나, poly-Si TFT 소자 모델을 가지고 있지 않다. 이 연구에서는 PSPICE에 다결정 실리콘 TFT 소자 모델을 이식하고, TFT가 이식된 PSPICE를 사용하여 poly-Si TFT-LCD 단위 화소 및 라인 RC 지연을 고려한 화소에 대한 전기적 특성을 분석하였다. 이러한 결과는 TFT-LCD 어레이 특성 분석을 위한 시뮬레이션을 효율적으로 수행하는데 기여할 수 있을 것으로 기대된다.

• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 2003년도 동계학술대회
• /
• pp.447-451
• /
• 2003

특정 프로그램의 취약점 여부를 판단하기 위한 방법에는 프로그램의 버전이나 작동여부를 점검하는 방법과 해당 프로그램에 실제 침투를 수행하고 그 성공여부를 검증하는 방식이 있다. 후자를 이용한 방식은 침투 코드의 구현, 재사용, 확장이 어렵기 때문에 전자에 비해서 널리 사용되지 않지만, 정확한 결과를 얻을 수 있고 보안의 경각심을 높일 수 있는 장점이 있다. 본 논문에서는 최근에 널리 사용되는 원격 취약점 침투 코드들의 구조를 분석하여 다양한 취약점을 보다 정확하게 검증할 수 있고 새로운 취약점에 대해서도 쉽게 확장할 수 있는 원격 취약점 증명 프레임워크를 제시한 후 이를 바탕으로 원격 취약점 증명 도구를 설계하고 구현한다. 원격 취약성 증명 도구는 원격 취약점 침투코드들의 모듈화 및 재사용을 위한 프레임워크 부분과 사용자의 입력을 받아서 모의 침투를 수행하고 침투 성공 증거를 제공하는 GUI 부분으로 구성된다.