• 제목/요약/키워드: GS5

검색결과 454건 처리시간 0.029초

영지속 균주의 배양적 특성 및 형태적 특성에 관한 연구 (Studies on Cultural and Morphological Characteristics of Isolate on Ganoderma species)

  • 성재모;김천환;문희부;김수호;이현경
    • 한국균학회지
    • /
    • 제24권1호통권76호
    • /
    • pp.67-80
    • /
    • 1996
  • Ganoderma속균은 약효가 인정되어 많이 인공 재배되어 이용되고 있으나 본 속균에 대한 기초적인 연구가 미흡한 실정이므로 본 연구에서는 영지 속균을 채집하여 분리 동정하였으며, 또한 배양적 특성과 형태적인 특징을 조사하였다. 영지속균은 경기도와 강원도 11개 장소의 참나무, 아카시나무, 오리나무 등에서와 6재배농가에서 채집되었다. 대부분의 영지는 하나의 버섯이 그루터기에서 형성되나 오리나무에서는 다수가 형성되었다. 영지속균의 균사 생장적온은 G. applanatum, G.lucidum, G. neo-japonicum에서는 $28{\sim}30^{\circ}C$이었고, G. tsugae에서는 $26^{\circ}C$이었으나 $32^{\circ}C$에서는 천천히 생장하였다. Hamda배지를 pH 6.2로 조정하였을 때 균사생장이 가창 좋았다. 6종의 공시균주에 대한 균사의 형태적인 특정으로 G. applanatum, G. lucidum, G. neo-japonicum은 staghorn를 형성하였으나 G.oregonens, G. ualeosiacum은 포도형의 가지를 가진 staghorn균사를 형성하였다. Clamp connection은 G. applanatum, G. lucidum, G. oregonense, G. valeosiacum균의 균사에서 관찰되었으나 node형을 가진 G. neo-japonioum에서는 형성되지 않았다. 후막포자는 G. applanatum, G. neo-japonicum에서 형성되었으며, cuticular cell는 G. lucidum, G. neo-japonicum, G. oregonense, G. tsugae의 균사에서 형성되었다.

  • PDF

고압산소치료의 구강악안면영역에서의 임상적 이용에 관한 연구 (A STUDY ON CLINICAL USE OF HYPERBARIC OXYGEN THERAY OF THE ORAL AND MAXILLOFACIAL REGION)

  • 류정호;엄기훈;배준수;유준영;장명진;김용관
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제27권5호
    • /
    • pp.447-452
    • /
    • 2001
  • Hyperbaric oxygen therapy(HBO) is defined as breathing 100% oxygen while in an enclosed system pressurized to greater than on atmosphere(sea level). This increased oxygen delivery furthers your body's ability to kill germs and to increase healing. HBO is a supplemental therapy to be used in addition to the current medical and surgical therapy you are receiving. HBO typically is used to complement treatments of medical problems such as bone infections, complication of radiotherapy, and certain chronic, non-healing wounds. On an emergency basis, the chamber also is used to treat problems such as carbon monoxide poisoning and the decompression sickness. We analysed stastically cases which are treated by hyperbaric oxygen therapy in point of oral and maxillofacial region on the Kangnam General Hospital for aid in comprehension and application of this therapy. Total 760 patients were treated at Gangnam General Hospital from July 1996 to September 1999. They were classified by region to Decompression sickness(DCS), Carbon monoxide poisoning(CO), General surgery(GS), Orthopedics(OS), Oral and Maxillofacial surgery(OMFS), others. Patients of Oral and Maxillofacial surgery were divided by diseses to Osteomyelitis, Osteoradionecrosis, Reconstruction, Bone graft, Difficult wounds, others. The results were as follows. 1. This institute conducts HBO therapy for DCS which takes up 62% and 10.5% for OMF region. 2. In OMF region, Osteomyelitis is 40%, Osteoradionecrosis is next, Bone graft, and Reconstruction is a row. 3. According to our precious study, HBO has been frequently conducted in OMF region compared to past, however, it is less actively conducted in this area for research than other conturies. Therefore, We need further application to the clinical use.

  • PDF

DEA 모형을 이용한 TV홈쇼핑기업의 상대적 효율성 연구 (Efficiency Analysis for TV Home Shopping Companies Using DEA(Data Envelopment Analysis))

  • 김순홍;안영효;오승철
    • 유통과학연구
    • /
    • 제12권8호
    • /
    • pp.5-15
    • /
    • 2014
  • Purpose - The method of TV home shopping is a kind of retail method that provides the viewer with information about products and, further, sells the products to consumers through the media of television. The domestic home-shopping industry has been expanding since 1995, and there are six companies in this arena as of 2012. In this study, we evaluate the management efficiency of TV home-shopping companies and provide suggestions for improving efficiency, using the DEA (data envelopment analysis) model. Hence, we expect to contribute to the progress of the companies' efficiency and the development of the TV home-shopping industry, where deepening competition is inevitable because it is experiencing the maturing market stage in its life cycle. Research design, data, and methodology - Efficiency is the ratio of the quantity of input to the quantity of output of a product or service. It is necessary to estimate aggregate inputs and aggregate outputs, which are calculated by applying a weighting to a number of input and output factors, to measure the efficiency. The DEA model is divided into the CCR model and the BCC model. The CCR model is a basic model that assumed constant returns to scale (CRS), and the BCC model extends the CCR model to accommodate technologies exhibiting variable returns to scale (VRS), and concerns only the technical efficiency without considering the efficiency of returns to scale. In this study, we consider six companies each year from 2008 to 2012 as a DMU (Decision Making Unit) and analyze the differences in efficiency for each company in each year. Furthermore, we evaluate the operating characteristics of TV home-shopping companies, using three models, in accordance with the overall performance, profitability, and marketability of the business. Results - The result of the analysis, using DEA models, shows that Hyundai Home Shopping (2009, 2010, 2011), GS Home Shopping (2011), NS Home Shopping (2011) and CJ O Shopping (2012) possess MPSS (most productive scale size), with a score 1.0 in CCR, BCC, and scale efficiency. Particularly, Hyundai Home Shopping is shown to be the most efficient in terms of overall business performance, marketability, and profitability. The overall efficiency of the home shopping industry has displayed an increasing trend since 2008, even though it decreased marginally in 2012; further, we can observe that home shopping companies operate with increasing efficiency with the passage of time. Conclusions - Home shopping companies have focused on market expansion rather than profits, as they displayed better efficiency in marketability than increase in profitability during the period 2008-2012. In addition, the main reason for the increased efficiency in the home shopping industry is the market expansion through the revenue increase of each home shopping company. This study can be used as a reference when home shopping companies attempt to devise future strategies, as it suggests efficiency benchmarks and development levels for each home shopping company.

구강질환 원인균에 대한 자몽종자추출물과 법제유황수 함유 치약시제품의 향균효과 (Antimicrobial Activity of Test Dentifrice Product Containing Grapefruit Seed Extract and Processed Sulfur Solution against Oral Pathogens)

  • 이보배;하유미;신수화;제경모;김순래;최재석;최인순
    • 생명과학회지
    • /
    • 제19권7호
    • /
    • pp.956-962
    • /
    • 2009
  • 구강질환 원인균에 대한 자몽종자추출물(GSE)과 법제유황수(PSS)의 항균활성을 확인하기 위해, 평판배지확산법 및 액체감수성실험법으로 Streptococcus mutans, Prevotella intermedia, Porphyromonas gingivalis 및 Candida albicans에 대한 항균활성을 측정하였다. 평판배지확산법의 경우, GSS의 농도가 40 ${\mu}l$/disk일 때, S. mutans, P. intermedia, P. gingivalis 및 C. albicans에 대한 항균활성은 각각 11.0, 9.5, 8.0, 9.0 mm로 나타났으며, PSS의 농도가 40 ${\mu}l$/disk일 때에는 각각 2.0, 3.5, 0.0, 1.5 mm로 나타났다. 또한 액체배지감수성실험에서 GSE에 대한 MIC 값은 0.24, 0.06, 0.10, 15.63 ${\mu}l$/ml 이었으며, PSS 에 대한 MIC 값은 각각 0.12, 3.91, >125, 7.81 ${\mu}l$/ml이었다. 치약 시제품의 항균효과를 확인하기 위해, GSE와 PSS가 농도별로 함유된 치약시제품 원액과 2배 및 4배 희석액을 제조하여 평판배지확산법을 수행한 결과, 0.5% 치약 시제품의 2배 희석액에서 각각 7.3, 4.3, 2.2 그리고 1.5 mm로 나타났다. 치약 시제품의 물리 화학적 특성을 확인한 결과, pH, 점도, 굴절 및 색도 변화에 있어서 모두 안정성을 보였고, 이상의 결과를 바탕으로 기능성 치약과 같은 구강질환 예방 및 치료제 개발 가능성을 확인하였다.

치면건조제와 접착제의 사용에 따른 치면열구전색재의 전단결합강도에 관한 연구 (THE EFFECTS OF DRYING AGENTS AND BONDING AGENTS ON THE SHEAR BOND STRENGTH OF SEALANTS TO ENAMEL)

  • 임현화;장기택;김종철;한세현
    • 대한소아치과학회지
    • /
    • 제30권2호
    • /
    • pp.196-203
    • /
    • 2003
  • 전색재의 적용은 기술에 매우 민감한 술식으로써 도포 전에 치면의 완전한 건조를 요구한다. 전색재 실패의 여러 요인 중 가장 주된 원인으로는 산부식 후 전색재 도포 전의 수분 또는 타액에 의한 오염인 것으로 인정되고 있다. 본 연구는 기존의 산부식만을 해오던 술식과 수분오염의 극복을 위해 변형된 술식이 전색재의 유지력에 미치는 효과를 전단결합강도를 측정하여 비교하고자 하였다. 1, 2, 3, 4군은 unfilled sealant인 Teethmate-F를, 5, 6, 7, 8군은 filled sealant인 Ultraseal XT plus를 사용하였다. 대조군인 1군과 5군은 35% 인산으로 15초간 산부식과 세척 후 건조시켰다. 2군과 6군은 여기에 치면건조제를 도포하였고, 3군과 7군에는 접착제를 도포하고 광중합하였다. 4군과 8군은 치면건조제와 접착제를 둘 다 도포하였다. 이후 직경 3mm, 높이 2mm의 몰드를 이용하여 전색재를 접착시키고 열순환을 시행한 다음 전단결합강도를 측정하여 다음의 결과를 얻었다. 1. filled sealant(5, 6, 7, 8군)에서 전단결합강도는 unfilled sealant(1, 2, 3, 4군)에 비해 각각 유의성 있게 높은 값을 보였다(p<0.05). 2. unfilled sealant에서는 산부식 처리만 한 1군에 비해 2, 3, 4군은 유의성 있게 전단결합강도가 증가하였으며(p<0.05), 2, 3, 4군 간에는 유의한 차이를 나타내지 않았다. 3. filled sealant에서는 산부식 처리만 한 5군에 비해 6, 7, 8군의 전단결합강도가 증가하였으나 유의성 있는 차이를 보이지 않았다. 그리고 6, 7, 8군 간에도 유의한 차이는 없었다. 4. 파절면 검사결과 ailed sealant 군에서는 응집성 파절이 관찰되지 않았으나, unfilled sealant 군에서는 2, 3, 4군에서 응집성 파절이 나타났다.를 보였으며 복합 레진은 유의차가 없었다. 상악 견치 (8%), 하악 제 1소구치 (5%) 순이었다. 10. I군에서 추정되는 낭의 발생 원인으로는 치수절단술을 받은 유치가 59.2%로 가장 많았고 이외에 심한 우식 및 치료 받지 않은 외상 병력등 기타 가능한 원인들이 있었다. 11.함치성 낭의 치료법으로는 I군의 경우 61.2%에서 조대술이 시행되었고, II군과 III군의 경우 61.1%, 80.0%에서 적출술이 시행되었다.mH I처치시 SM1과 SM2는 4조각의 절편으로 절단되어 같은 양상을 보였고, GS톤의 경우는 3조각의 절편으로 절단되었다. Kpn I, Sma I, Xho I 그리고 Pst I에는 절단되지 않았다.s subsp. salicinius와 유전자 유사치가 99.60%, 99.73%를 보여 Lactobacillus salivarius subsp. salicinius로 동정되었다. 이상의 결과를 종합하면 치아우식증이 없는 소아의 타액에서 분리된 유산균 중 과산화수소를 분비하여 인공치태 형성과 휘발성 유황화합물 생성을 억제하는 분리균주는 Lactobacillus salivarius subsp. salicinius로 동정되었다.적으로 낮은 수축률과 우수한 물성을 보였으며, 나노필러를 사용한 복합레진의 경우, 기존의 hybrid 필러를 이용한 레진에 비하여 수축응력을 감소시키지는 못하였다. 나노필러를 이용한 복합레진은 개발의 초기단계이며, 물성의 증가를 위한 연구가 필요할 것으로 사료된다.또 다른 약물인 glycyrrhetinic acid($100{\mu}M$)도 CCh 자극으로 인한 타액분비를 억제하였다. 이상의 결과로 미루어 gap junction은 흰쥐 악하선 세포로부터의 타액분비 조절에 중요한 역할을 하는데, 이는 gap junction이 세포막 $Ca^{2+}$ 통로를 조절함으로써 수용체 자극으로 유발된 세포내

  • PDF

Detection and genotyping of Giardia intestinalis isolates using intergenic spacer (IGS)-based PCR

  • Lee, Jong-Ho;Lee, Jong-Weon;Park, Soon-Jung;Yong, Tai-Soon;Hwang, Ui-Wook
    • Parasites, Hosts and Diseases
    • /
    • 제44권4호
    • /
    • pp.343-353
    • /
    • 2006
  • Giardia intestinalis infections arise primarily from contaminated food or water Zoonotic transmission is possible, and at least 7 major assemblages including 2 assemblages recovered from humans have been identified. The determination of the genotype of G. intestinalis is useful not only for assessing the correlation of clinical symptoms and genotypes, but also for finding the infection route and its causative agent in epidemiological studies. In this study, methods to identify the genotypes more specifically than the known 2 genotypes recovered from humans have been developed using the intergenic spacer (IGS) region of rDNA. The IGS region contains varying sequences and is thus suitable for comparing isolates once they are classified as the same strain. Genomic DNA was extracted from cysts isolated from the feces of 5 Chinese, 2 Laotians and 2 Koreans infected with G. intestinalis and the trophozoites of WB, K1, and GS strains cultured in the laboratory, respectively. The rDNA containing the IGS region was amplified by PCR and cloned. The nucleotide sequence of the 3' end of IGS region was determined and examined by multiple alignment and phylogenetic analysis. Based on the nucleotide sequence of the IGS region, 13 G. intestinalis isolates were classified to assemblages A and B, and assemblage A was subdivided into A1 and A2. Then, the primers specific to each assemblage were designed, and PCR was peformed using those primers. It detected as little as 10 pg of DNA, and the PCR amplified products with the specific length to each assemblage (A1, 176bp; A2, 261 bp; B, 319 bp) were found. The PCR specific to 3 assemblages of G. intestinalis did not react with other bacteria or protozoans, and it did not react with G. intestinalis isolates obtained from dogs and rats. It was thus confirmed that by applying this PCR method amplifying the IGS region, the detection of G. intestinalis and its genotyping can be determined simultaneously.

Dexamethasone 치료기간중의 지구력 운동이 dexamethasone에 의해 유발된 쥐의 뒷다리근 위축경감에 미치는 영향 (Effect of Endurance Exercise during Dexamethasone Treatment on the Attenuation of Atrophied Hindlimb Muscle Induced by Dexamethasone in Rats)

  • 최명애
    • 대한간호학회지
    • /
    • 제28권4호
    • /
    • pp.893-907
    • /
    • 1998
  • The purpose of this study was to determine the effect of regular exercise during dexamethasone injection on the body weight, weight of hindlimb muslces, myofibrillar protein content and glutamine synthetase activity. 180-200g female Wistar rats were divided into four groups : control, exercise, dexamethasone injection (dexa), and exercise during dexamethasone injection(D+E) group. The dexa group received daily subcutaneous injection of dexamethasone at a dose of 4mg/kg body weight for 7 days. The exercise group ran on a treadmill for 60min/day(20minutes every 4 hours) at 10m/min and a 10$^{\circ}$grade. The control group received daily subcutaneous injection of normal saline at a dose of 4mg/kg body weight for 7 days. The D+E group ran on a treadmill for 60min/day(20minutes every 4 hours) at 10m/min and a 10$^{\circ}$ grade during dexamethasone injection. Body weight of the control group increased significantly from days of experiment, that of the dexa group decreased significantly from day 4 of the experiment resulting in a 82.4% decrease compared to the first day of the experiment. Body weight of the D+E group decreased significantly from day 5 of experiment resulting in a 81.77% decrease comprared to the first day of the experiment. Body weights, muscle weight and myofibrillar protein content of the plantaris and gastrocnemius decreased significantly and muscle weight of the soleus tended to decrease with dexamethasone injection. Glutamine synthetase activity of the hindlimb muscles increased significantly with the dexamethasone injection. The relative weight of the soleus was comparable to the control group and that of plantaris decreased significantly and that of gastrocnemius tended to decrease compared to that of the control in the dexa group. Body weight and muscle weight of the plantaris and gastrocnemius of the excrcise group were comparable to the control group, and the muscle weight of soleus showed a tendencey to increase. The relative weight of the soleus increased significantly and that of the plantaris and gastrocnemius were comparable to the control in the exercise group. Myofibrillar protein content of the soleus and plantaris increased significantly and there was no change of GS activity of the hindlimb muscles compared to the control in the exercise group. Body weight of the D+E group was comparable to the dexa group, muscle weight of the plantaris increased significantly and that of the soleus and gastrocnemius showed a tendency to increase. The relative weight of the hindlimb muscles increased significantly. Myofibrillar protein content of the soleus and plantaris increased significantly and that of the gastrocnemius tended to increase compared to the dexa group. Body weight and muscle weight of the plantaris and gastrocnemius of the D+E group did not recover to that of the control group. Muscle weight of the soleus recovered to that of the control group. The relative weight and of myofibrillar protein content of the hindlimb muscles recovered to that of the control group. From these results, it is suggested that regular exercise during dexamethasone injection might attenuate the muscle atrophy of the hindlimb muscles.

  • PDF

경량골재 콘크리트 바닥판의 펀칭전단강도의 실험적 평가 (Experimental Evaluation of the Punching Shear Strength with Lightweight Aggregate Concrete Slabs)

  • 김정중;문지호;염광수
    • 콘크리트학회논문집
    • /
    • 제26권3호
    • /
    • pp.361-367
    • /
    • 2014
  • 이 연구에서는 실험연구를 통하여 경량골재콘크리트 바닥판의 펀칭전단강도를 평가하였다. 일반콘크리트와 서로 다른 4 종류의 경량골재를 사용하여 총 5 개의 바닥판 실험체를 제작하였다. 이 연구에서 사용된 4 가지의 경량골재는 서로 원재료(점토, 셰일, 혹은 점판암) 및 형상 (원형 혹은 분쇄형)이 다르며, 이러한 서로 다른 경량 골재들이 바닥판의 펀칭전단강도에 미치는 영향을 실험 결과를 바탕으로 분석하였다. 실험 결과, 원형 경량골재로 만든 바닥판실험체의 펀칭전단파괴면은 일반콘크리트 실험체 및 파쇄된 경량골재 바닥판실험체보다 기울기가 낮았으며, 이로 인해 전단파괴면이 더 넓게 분포하였다. 이로 인해 펀칭 전단강도가 증가될 수 있었다. 반면에 파쇄된 경량골재의 경우 파괴면이 일반 콘크리트와 유사한 것으로 나타났다. 마지막으로 실험 결과를 현재 펀칭전단강도를 예측하는데 널리 쓰이는 국내기준과 ACI318-11 및 CEB-FIP 코드와 비교 분석하여 경량골재콘크리트 바닥판의 펀칭전단강도 예측의 유효성을 검증하였다.

이종금속간의 결합방법에 따른 결합강도에 관한 비교 연구 (Comparative analysis on mechanical properties of gold and Co-Cr dental alloys due to joining methods)

  • 박성규;최부병;권긍록
    • 구강회복응용과학지
    • /
    • 제19권2호
    • /
    • pp.75-86
    • /
    • 2003
  • The purpose of this study was to evaluate their mechanical properties after laser-welding or soldering of precious and non-precious dental alloys. For this study, 30 Co-Cr alloy specimens, 15 gold alloy specimens, 15 palladium alloy specimens were casted and seperated on the middle area. 15 sperated Co-Cr specimens and 15 seperated gold alloy specimens were laser welded (GW Group). 15 sperated Co-Cr specimens and 15 sperated gold alloy specimens were soldered by coventional soldering method (GS Group). 15 sperated Co-Cr specimens and 15 seperated palladium alloy specimens were laser welded (PW Group). 15 sperated Co-Cr specimens and 15 sperated palladium alloy specimens were soldered by coventional soldering method (PS Group). Tensile strength, 0.2% yield strength, % elongation were recorded in nine specimens of each group. Bending strength were record in six specimens of each group. These data for four groups were subjected to a two-way analysis of variance(ANOVA). The fracture locations, fractured surfaces were examined by SEM(scanning electron microscope). The results were as following: 1) In the same alloy combination, the tensile strength and 0.2% yield strength and of the laser welded group with same metal combination were significantly less than soldered groups(p<0.05). 2) In the combination of Co-Cr/Palladium, the bending strength of laser welded group were significantly less than that of soldered groups(p<0.05). In the combination of Co-Cr/Gold, the bending strength of laser welded group were significantly higher than that of soldered groups(p<0.05). 3) In the same method of joint, the tensile strength and 0.2% yield strength and bending strength of the Co-Cr/gold were significantly higher than Co-Cr/palladium(p<0.05). 4) There was no significantly statistical difference between each group in the % elongation(p>0.05). 5) The fracture of the laser welded specimens occured in the welding area and a large void was observed at the center of the fracture surface. 6) The fracture of the soldered specimens occured also inthe soldered area and many porpsities were showed at the fracture sites.

Utilizing chromosome segment substitution lines (CSSLs) to evaluate developmental plasticity of root systems in hardpan penetration and deep rooting triggered by soil moisture fluctuations in rice

  • Nguyen, Thi Ngoc Dinh;Suralta, Roel R.;Mana, Kano-Nakata;Mitsuya, Shiro;Stella, Owusu Nketia;Kabuki, Takuya;Yamauchi, Akira
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.321-321
    • /
    • 2017
  • Water availability in rainfed lowlands (RFL) is strongly affected by climate change. In RFL, rice plants are exposed to soil moisture fluctuations (SMF) but rarely to simple progressive drought as widely believed. Typical RFL field is characterized by a about 5-cm thick high bulk density hardpan layer underneath the cultivated layer at about 20 cm depth that impedes deep root development. Root system has the ability to develop in response to changes in SMF, known as phenotypic plasticity. We hypothesized that genotypes that can adapt to RFL have root plasticity. The roots can sharply respond to re-wetting after drought period and thus penetrate the hardpan layer when the hardpan is wet and so becomes relatively soft, and thus access water under the hardpan. This study aimed to identify CSSLs derived from a cross between Sasanishiki and Habataki which adapted to such RFL conditions. We used 39 CSSLs together with the parent Sasanishiki, which were grown in hydroponics and pot under transient soil moisture stresses (drought and then rewatering), and compared with continuously well-watered (WW) (control) up to 14 days after sowing (DAS), and 20 DAS, respectively. Based on the results of hydroponics and pot experiments, we selected a few lines, which were grown in the soil-filled rootbox with artificial hardpan layer and without artificial hardpan. For the rootbox without artificial hardpan, plants were grown under WW and transient soil moisture stresses for 49 DAS. While the rootbox with artificial hardpan, the plants were grown under WW (control) and SMF (WW up to 21 DAS, 1st drought (22-36 DAS), rewatering (37-44 DAS), and followed by 2nd drought (45-58 DAS)). Among the 39 CSSLs, only CSSL439 (SL39) consistently showed significantly higher shoot dry weight (SDW) than Sasanishiki under transient soil moisture stress conditions as well as SMF conditions in all the experiments. Furthermore, under WW, SL39 consistently showed no significant differences from Sasanishiki in shoot and root growth in most of traits examined. SL39 showed significantly greater total root length (TRL) than Sasanishiki under transient soil moisture stress, which is considered as phenotypic plasticity in response to rewatering after drought period. Such plastic root development was the key trait that effectively contributed to root elongation and branching during the rewatering period and consequently enhanced the root to penetrate hardpan layer when the soil penetration resistance at hardpan layer reduced. In addition, using the rootbox with artificial hardpan layer ($1.7g\;cm^{-3}$, heavily compacted), SL39 showed greater root system development than Sasanishiki under SMF, which was expressed in its significantly higher TRL, total nodal RL, and total lateral RL at hardpan layer as well as at below the hardpan layer. These results prove that SL39 has plasticity that enables its root systems to penetrate hardpan layer in response to rewatering. Under SMF, such root plasticity contributed to its higher gs and Pn.

  • PDF