• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.63-64
• /
• 2008

GPS의 활용 분야는 군용 항법 시스템에서 항공, 선박 등의 개인 항법 시스템으로 확장되었다. GPS가 넓은 범위에서 응용됨에 따라 Jamming과 같은 고의적인 간섭 신호의 제거에 대하여 많은 연구가 진행되었다. 그러나 기만 신호의 특성이나 기만 기법에 대한 연구는 미비하다. 본 논문에서는 기만 신호의 구조와 기만 개념을 연구하였으며 기만신호의 생성 기법으로 항법 메시지를 이용한 기법과 GPS PRN 코드를 이용하여 TOA(Time of Arrival)에 오차를 인가하는 기법을 정리하고 이중 TOA에 오차를 인가하는 방식을 GPS 소프트웨어 플랫폼에 구현하여 기만신호를 생성하였다. 또한 기만 신호 대응 기법의 개발 텐 성능 분석을 위하여 소프트웨어 GPS 수신기를 이용하여 생성한 기만 신호가 GPS 수신기에 미치는 영향을 분석하였다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.1
• /
• pp.119-127
• /
• 2009

There have been about 450 atomic frequency standards (or atomic clocks) launched into orbit for the use on communications and scientific payloads since 1970's. GPS satellites carry on-board Rubidium and Cesium atomic frequency standards which are utilized for the precise positioning and timing. The evolving technologies of space qualified atomic frequency standards have enhanced in the performance, reliability, and lifetime of satellites. In this paper we describe the fundamentals and performance of the atomic frequency standards, and introduce the atomic frequency standards which are presently on-board various satellites systems. We also present the GPS time scale and its applications.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1759-1760
• /
• 2006

GPS 수신기에서 항법을 수행하기 위해서 신호탐색, 신호추적, 데이터 동기, 데이터 복조, 측정치 생성 및 위치 계산의 과정을 거쳐야 한다. TTFF(Time To First Fix)는 이러한 시간의 합으로 수신기의 성능을 나타내는 중요 평가지수 중의 하나이다. 일반적인 수신기의 TTFF는 80~90초인 것으로 알려져 있으며, 고속으로 운동하는 항체의 경우, 빠른 TTFF를 필요로 하므로 가장 긴 시간이 소비하는 신호탐색 과정의 시간을 줄여야 한다. 본 논문에서는 고속으로 운동하는 항체에서 GPS 신호의 코드 탐색 시간을 줄이기 위하여 다중 상관기 구조를 가지는 수신기를 설계 하고자한다. 설계한 수신기는 수신된 신호의 코드위상을 여러 개의 상관기에서 동시에 탐색하도록 다중 상관기를 구성하여 코드위상 검색에 소요되는 시간을 단축시킨다. 이를 검증하기 위하여 GPS 모의 신호 발생기를 이용하여 실험을 수행하였다. GPS 신호는 IF 데이터 수집 장치로부터 수집된 신호를 이용하며, 실험 수행 결과 다중 상관기를 이용하였을 때 TTFF가 단축되는 것을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.123-129
• /
• 2002

This paper reveals determination of orbital elements of the satellite using GPS data collected by the low-end GPS receiver installed at KITSAT-3 which is a small scientific experimental satellite of Korea and launched in May 1999. An extended Kalman filter is designed for a forward estimation of real-time 3-dimensional position and velocity, and a smoother is used for a backward post-processing estimation of the same states. After finishing estimation of position and velocity, the corresponding orbital elements are estimated. Finally, the result of each orbital element is analyzed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.253-259
• /
• 2014

There has been a need for replacing human labors with a robot in such dangerous and hard jobs of various construction sites. For that reason, many researches have been made about the high quality robot, which performs its duty instead of human labors. This study is about auto surveying system development based on VRS-GPS which enables autodriving in dangerous areas where it's difficult for humans to measure directly. This study is about the auto-surveying system development, based on VRS-GPS, which enables auto-drive in dangerous areas, whereas difficult for humans to measure directly. The GPS is made with GRXI and SHC250 controllers of the SOKKIA company. The auto surveying system is composed of DPS module, geomagnetism sensor, bluetooth, gimbals, IMU, etc to automatic drive via enter into a route of position. The developed auto surveying system has installed the carmeras for front and vertical axis as well as systems to grasp situation of surveying with smartphone in real time. The result from analysed RMSE of auto surveying system and VRS-GPS surveying is 0.0169m of X-axis and 0.0246m of Y-axis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.151-155
• /
• 2008

KHST(Korean High Speed Train) has been utilized the total measurement system which evaluates the efficiency and a breakdown of the vehicle and it's results effect to secure reliability of the vehicle. Generally KHST has been received pulse signals from the wheel. It calculates the travel distance after counter the signals to confirm location information of the vehicle. However, there is a limit to measure the location of the vehicle due to slip, slide and the wheel attrition. We have developed a new measurement system by using GPS to complement those errors. In general, GPS receivers are composed of an antenna, tuned to the frequencies transmitted by the satellites, receiver-processors, and a highly-stable clock The GPS mounted on the roof of TT4 in KHST receives a signal from the RS232 communication port. It is connected to the network system in TT3 after converting with TCPIP communication. It is able to track the position of vehicle and synchronize the signal from different measurement system simultaneously. Therefore it is able to chase the fault occurrence, track inspection and electrical interruption at real-time situation more accurately. There is not an error coursed by vehicle conditions such as slip and the slide.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.3
• /
• pp.342-347
• /
• 2003

It is essential to develop an algorithm for the estimate of link travel velocity and for the supply and control of travel information in the context of intelligent transportation information system. The paper proposes the fuzzy logic based prediction of link travel velocity. Three factors such as time, date and velocity are considered as major components to represent the travel situation. In the fuzzy modeling, those factors were expressed by fuzzy membership functions. We acquire position／velocity data through GPS antenna with PDA embedded probe vehicles. The link travel velocity is calculated using refined GPS data and the prediction results are compared with actual data for its accuracy.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.367-376
• /
• 2002

As of September 2002, there are more than 60 operational permanent Global Positioning System (GPS) stations in South Korea. Their data are being used for a variety of purposes: geodynamics, geodesy, real-time navigation, atmospheric science, and geography. Especially, many of the sites are reference stations for DGPS (Differential GPS). However, there has been no comprehensive and qualitative analysis published to evaluate the data quality. In this study, we present preliminary results of our assessment of the permanent GPS sites in South Korea. We have analyzed the multi-path characteristics of each station using a quality-checking software package called TEQC. Another multipath analysis tool based on post-fit phase residuals was used to check the repeating patterns and the amount of the multipath at each site. The long-term stability of each station was analyzed using the root-mean-square (RMS) error of the estimated site positions for one year, which enabled us to evaluate the mount stability. In addition, the number of cycle slips at each site was derived by TEQC. Based on these series of tests, we compared the stability and data quality of permanent GPS stations in South Korea.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.145-150
• /
• 2004

In this paper, development of automation system for real time cadastral surveying and mapping is studied. This system is composed of interface between pc and GPS receiver, input-output-store of positioning information by RTK-GPS surveying. Also coordinates of surveying is displayed on CAD. As a results of this application on the field, transformed coordinates of points are displayed on the map at the real time as surveying. This system is applied to construct coordinate information for a parcel of land, and this could be specially used to realize the information of boundary points in the field.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.62-68
• /
• 1999

The attitude of a vehicle can be precisely determined using GPS carrier phase measurements from more than two antennas attached to a vehicle and an efficient integer ambiguity resolution technique. Many methods utilizing the known baseline length as a constraint of independent elements of integer ambiguities are proposed to resolve integer ambiguity at real time. Three-dimensional search space is reduced to two-dimensional search space with this constraint. Thus the true integer ambiguity can be easily determined with less computational burden and fewer number of measurements. But there are still strong requirements for the real time integer ambiguity resolution, which uses single epoch measurement of long baseline. In this paper, a new constraint from the geometry of multiple baselines is derived. With this new constraint, two-dimensional search space is further reduced to one-dimensional search space. It makes possible to determine integer ambiguity with single epoch measurement. The proposed method is applied to real data to show its effectiveness.