• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.549-557
• /
• 2012

Spatial phenomena such as environment pollution, disease and the risk of spreading information need a rapid initial response to perceive spread event. Moving data perceive spread event through real-time processing and analysis. To process and analysis the event, spatial-temporal complex event processing is used. Previous spatialtemporal complex event processing is possible basis spatial operator but insufficient apply to design spatialtemporal complex event processing to perceive spatial phenomena of high complexity. This study proposed hierarchical spatio-temporal CEP design which will efficiently manage the fast growing incoming sensor data. The implementation of the proposed design is evaluated with GPS location data of moving vehicles which are used as the incoming data stream for identifying spatial events. The spatial component of existing CEP software engine has been extended during the implementation phase to broaden the capabilities of processing spatio-temporal events.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.71-78
• /
• 2016

In the paper, we predict the number of multi-GNSS satellites and visible satellites with the navigation satellite launch plans and their nominal orbit parameters. Based on the methodology, the multi-GNSS navigation performance and DOP (Dilution of Precision) variation from 2015 to 2020 were forecasted by the Matlab simulation. To calculate the position using the multi-GNSS constellation, we determined the time-offset between the two different systems. Two different algorithms were considered for the sake of time-offset determination; that of each was applied to system level and user side. Also, the results from two algorithms were compared for evaluating each performance. For the reality, we applied the 3D map information to the simulation, which is expected to contribute for predicting the future navigation performance in urban canyon.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.886-892
• /
• 2010

It is possible to use wireless communication any time in every place because of well-developed wireless networks and mobile devices. The AVL(Automatic Vehicle Location) system, therefore, has made practical use in situation control, distribution industry, home delivery service, and ITS(Intelligent Transportation System) area. In this paper, we design and implement an AVL system in order to use for fire fighting activities such as emergency rescue and relief. To do this, first, we investigate and analyze the existing researches and systems related to AVL system. In details, we develop an AVL server and clients to support stable communication each other using wireless networks. Using AVL system, calling cars find the position of accidents quickly and the fire defense headquarters control unforeseen accidents efficiently because the state of calling cars are confirmed in real time by their GPS data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.2
• /
• pp.108-121
• /
• 1986

In this paper, the development of a simulator for the performance estimation and parameter optimization of an integrates voice/data packet communication network is described. The simulator implemented is capable of simulating the integrated voice/data network that handles packet voice terminals as well as data terminals and hosts operating under standard CCITT protocols. Of the three descrete event simulation approaches presently known, the process interaction method has been chose. With this approach one can implement a simulator that is related most Closely with the real system. The simulator has been implemented in PL/I and GPSS simulation languages, resulting in a software package of about 4,000 lines. To reduce the computer run time of the simulator, we have used a method of reducing conditional events based on a GPSS LINK block. We describe various aspects of the simulation model developed. We then investigate the performance of a 7-node network using the simulator, and present the results. For validation of the simulator developed, we construct a simulation model for a simple voice/ data multiplexer, and compare the results of simulation with those of an analytical model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.633-643
• /
• 2003

UWB impulse radio signals have an very short duration, extremely wide bandwidth and share the same frequency spectrum with other existing systems. It was determined by the Federal Communications Commission (FCC) that UWB systems could cause interference with other systems, such as Global Positioning System (GPS) for example. Therefore, at present. the FCC has restricted the use of UWB systems to frequencies above 3.1㎓. In this paper, We evaluated performance of UWB system using proposed pulses in ［1］［2］ that are strictly limited in time to remove interference while, at the same time, contain their power distribution to a frequency band from 3.1㎓ to 10.6㎓. In particular, We evaluated the BER Performance in relation to system parameters such as pulse duration. $\delta$, the number of users. Nu. and the number of symbols, M. We found the optimal pulse duration $\delta$ through computer simulation using developed UWB pulses in ［1］［2］. It is shown that performance evaluation between the UWB communication system using these UWB pulses ［1］［2］and the Gaussian monocycle pulse in M-ary PPM and BPSK schemes. These results can be contributed to construct M-ary PPM UWB communication system in terms of multiuser parameters and pulse duration.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.15-22
• /
• 2006

This paper presents a novel signal tracking algorithm for GNSS receivers using a MLE technique. In order to perform a robust signal tracking in severe signal environments, e.g., high dynamics for navigation vehicles or weak signals for indoor positioning, the MLE based signal tracking approach is adopted in the paper. With assuming white Gaussian additive noise, the cost function of MLE is expanded to the cost function of NLSE. Efficient and practical approach for Doppler frequency tracking by the MLE is derived based on the assumption of code-free signals, i.e., the cost function of the MLE for carrier Doppler tracking is used to derive a discriminator function to create error signals from incoming and reference signals. The use of the MLE method for carrier tracking makes it possible to generalize the MLE equation for arbitrary codes and modulation schemes. This is ideally suited for various GNSS signals with same structure of tracking module. This paper proposes two different types of MLE based tracking method, i.e., an iterative batch processing method and a non-iterative feed-forward processing method. The first method is derived without any limitation on time consumption, while the second method is proposed for a time limited case by using a 1st derivative of cost function, which is proportional to error signal from discriminators of conventional tracking methods. The second method can be implemented by a block diagram approach for tracking carrier phase, Doppler frequency and code phase with assuming no correlation of signal parameters. Finally, a state space form of FLL/PLL/DLL is adopted to the designed MLE based tracking algorithm for reducing noise on the estimated signal parameters.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.1
• /
• pp.97-106
• /
• 2020

Urban parks provide a variety of ecosystem services and are an important means of providing positive functions to urban ecosystems. Recently, various studies on wildlifes in urban parks have been conducted. However, there is a lack of research on habitat use in urban parks at important times such as before and after fledging in bird ecology. This study analyzed habitat use and home-range before and after fledging on Cheongsa park, a neighborhood park located in Cheonan city. An artificial nest was set up to check and capture great tit in fledging time. One female was captured and attached to the NTQB-2 (0.4g) radio transmitter, the location was tracked using SIKA Radio Tracking Receiver, hand-held three element Yagi antenna and GPS. Location information was recorded for 10 minutes for 3 hours each morning and afternoon for 12 days from May 17 to May 31, 2019. As a result, the home-range of the target species was 1.776 ha (MCP) and the core area was 499 ㎡ (KD 50%). The average daily home-range was 0.513 ha for the entire period, 0.688 ha before fledging, 0.339 ha after fledging based on MCP. The bird moved about 29.9 m on average and moved up to 131.7 m. For the most of the time, the great tit stayed inside the park, but the bird also used small green spaces such as street trees, tree flower beds, and green areas of unused lands. The results of this study could be applied to the study of habitat use and the greenery management policy of the urban park considering wild birds.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.60-69
• /
• 2012

Public Transport Information Service which use smartphone Apps has received attention as the way of solution that reduced transport problem. Smartphone can offer real-time information because of a LBS(Location Based Service) system. This study try to find out which factor affect mode choice ratio of public transport, especially smartphone Apps. The result shows that rising oil price, traffic congestion, public information service with smartphone apps, BIS(Bus Information System) factors get 0.39, 0.27, 0.18, 0.16 scores with paired comparison. Younger and student respondents prefer smart phone public information service. Decision Tree shows that the most important decision factor is smartphone information service factor.

• Korean Journal of Remote Sensing
• /
• v.24 no.3
• /
• pp.223-233
• /
• 2008

In the mid 90's, the U.S. government released images acquired by the first generation of photo reconnaissance satellite missions between 1960 and 1972. The Declassified Intelligent Satellite Photographs (DISP) from the Corona mission are of high quality with an astounding ground resolution of about 2 m. The KH-4A panoramic camera system employed a scan angle of $70^{\circ}$ that produces film strips with a dimension of $55\;mm\;{\times}\;757\;mm$. Since GPS/INS did not exist at the time of data acquisition, the exterior orientation must be established in the traditional way by using control information and the interior orientation of the camera. Detailed information about the camera is not available, however. For reconstructing points in object space from DISP imagery to an accuracy that is comparable to high resolution (a few meters), a precise camera model is essential. This paper is concerned with the derivation of a rigorous mathematical model for the KH-4A/B panoramic camera. The proposed model is compared with generic sensor models, such as affine transformation and rational functions. The paper concludes with experimental results concerning the precision of reconstructed points in object space. The rigorous mathematical panoramic camera model for the KH-4A camera system is based on extended collinearity equations assuming that the satellite trajectory during one scan is smooth and the attitude remains unchanged. As a result, the collinearity equations express the perspective center as a function of the scan time. With the known satellite velocity this will translate into a shift along-track. Therefore, the exterior orientation contains seven parameters to be estimated. The reconstruction of object points can now be performed with the exterior orientation parameters, either by intersecting bundle rays with a known surface or by using the stereoscopic KH-4A arrangement with fore and aft cameras mounted an angle of $30^{\circ}$.

• International Journal of Computer Science & Network Security
• /
• v.21 no.6
• /
• pp.11-16
• /
• 2021

At the present time, the number of accidents has enlarged speedily and in country like India per day there are about 204 accidents occurred. Accidents of two-wheeler compose a foremost segment of every accident and it can be true for the reason that two-wheelers like bikes not able to produce as many as security measurements normally incorporated in cars, truks and bus etc. General main rootcost of the two-wheeler accidents happen only when people community not remember to wearing a device helmet and during the driving time feels like sleep condition, alcohol disbursement, many of the drivers doesn't know heavy vehicles like Loory and buses approaching into very closer to their two wheelers, contravention of two wheelers in traffic rules and regulations. Let's overcome the above situations; our important objective is to develop an intelligent system device that can successfully facilitate in avoidance of every kind of problems. Suppose any of the above stated situations occurs, at that moment how system device identify and represents the commanders and community, and finally the stated situation be able to taken care of straight away without any further delay. A smart intelligent helmet system is a defending head covering used by rider for making bike riding safer than earlier. This is finished by incorporating sophisticated features like detecting the usage of helmet by the rider, connected Bluetooth module in helmet. In order to maintain the temperature inside the helmet device we need to include CPU fan module inside the device. RF based helmet prevents road accidents and identify whether people community is not using a component helmet or used. Main responsibility of the system is to detect accidents by vibration sensors, accelerometers and also with the help of modules global positioning system and global system for mobile commnicaiton module. A wireless communication device used to discover the accident area site location and likewise notifying the two-wheeler drived people's relatives and short message text information passed to the positioned hospitals.