• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.352-358
• /
• 2012

Purpose: The inexpensive black box system was developed to acquire and save driving information, to give the slope information, and to transmit SOS and theft signal. Method: The device consists of a main micro controller to acquire and save data, a GPS sensor module, a CDMA module, a touch LCD module, a RF (Radio Frequency) ID module, a SD (Secure Digital) card module, an emergency electric power source, a theftproof circuit, and a sensing device. The sensing device consists of a 8 bit micro controller, a accelerometer to detect impulse, two slope sensors to detect roll and pitch angle and a circuit to detect operation of 6 lighting devices. Results: Test results are as follows: 1) a tractor can be start up only with an electronic key (password or RFID card), 2) theft signal was transmitted when a tractor moved without an electronic key, 3) SOS was transmitted at conditions that rollover or crash happened. 4) 5 more than per 1s data are recorded at 5 minute intervals as new file name in SD card. Conclusions: This system can be used to save travelling record, reduce accident, prevent theft and rescue life in the accidents.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.47-60
• /
• 2018

In this paper, we proposed a method for eliminating aiming error of unguided anti-tank rocket using improved target tracking. Since predicted fire is necessary to hit moving targets with unguided rockets, a method was proposed to estimate the position and velocity of target using fire control system. However, such a method has a problem that the hit rate may be lowered due to the aiming error of the shooter. In order to solve this problem, we used an image-based target tracking method to correct error caused by the shooter. We also proposed a robust tracking method based on TLD(Tracking Learning Detection) considering characteristics of the FCS(Fire Control System) devices. To verify the performance of our proposed algorithm, we measured the target velocity using GPS and compared it with our estimation. It is proved that our method is robust to shooter's aiming error.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.171-173
• /
• 2018

The poor working conditions of transit drivers not only lead to mental stress and fatigue accumulation of workers, but also to the main causes of mass transit accidents. Stress and fatigue accumulation are closely related to the vital signs because they affect the psychological and physical health. In this paper, we designed a digital garment which can measure driver's health condition by measuring electrocardiogram, pulse rate and body temperature. Also proposed a system that transmits the measured bio-signal to the smartphone app via Bluetooth and transmits the current position of the driver to the server by using the built-in GPS of the smartphone, assuming there is something wrong.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.189-197
• /
• 2007

Developed safety system which transfers danger information to rear cars for accident prevention when drivers detect a accident, a dropping or a freezing during driving on the high way. To prevent an accident, each vehicles mount OBU which is made up of a GPS unit and a transmitter-receiver and the trace of road is always renewed and saved in OBU per a regular past distance. When the driver see dangerous situation, transfer a danger pattern and a trace information by pressing button. All cars which receive information compare the received data with the original data. And then, only cars which are located at the rear in a regular distance respond and occur a warning. Performed a road test at the rate of $30{\sim}50$ kilometer a hour using two test cars which saved about 120meter's space between them were mounted OBU which had 447Mhz transceiver. As a result of the experiment, communication between test cars had no problem. Accordingly, it can use a safety driving device because driver can notice a danger situation and set themselves ready for it using this system in advance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.390-396
• /
• 2015

The drastic growth of mobile communication and spreading of smart phone make the significant attention on Location Based Service. The one of most important things for vitalizations of LBS is the accurate estimating position for mobile object. Focusing on an image sensor deployed in smart phone, we develop a LED based positioning estimation framework. The developed approaches can strengthen the advantages of independent indoor applicability of LED. The estimation of LED based positioning is effectively applied to any indoor environment. We put a focus especially on the algorithmic framework. of image processing of smart phone. From LED lighting, we can obtain a typical signal image which contains the unique positioning information. Furthermore test-bed based on smart phone platform is practically developed and all data have been harvested from the actual measurement of test indoor area. This can approve the practical usefulness of proposed framework.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.33-37
• /
• 2006

Since 1993, the civil aviation community through RTCA (Radio Technical Commission for Aeronautics) and the ICAO (International Civil Air Navigation Organization) have been working on the definition of GNSS augmentation systems that will provide improved levels of accuracy and integrity. These augmentation systems have been classified into three distinct groups: Aircraft Based Augmentation Systems (ABAS), Space Based Augmentation Systems (SBAS) and Ground Based Augmentation Systems (GBAS). The last one is an implemented system to support Air Navigation in CAT-I approaching operation. It consists of three primary subsystems: the GNSS Satellite subsystem that produces the ranging signals and navigation messages; the GBAS ground subsystem, which uses two or more GNSS receivers. It collects pseudo ranges for all GNSS satellites in view and computes and broadcasts differential corrections and integrity-related information; the Aircraft subsystem. Within the area of coverage of the ground station, aircraft subsystems may use the broadcast corrections to compute their own measurements in line with the differential principle. After selection of the desired FAS for the landing runway, the differentially corrected position is used to generate navigation guidance signals. Those are lateral and vertical deviations as well as distance to the threshold crossing point of the selected FAS and integrity flags. The Department of Applied Science in Naples has create for its study a virtual GBAS Ground station. Starting from three GPS double frequency receivers, we collect data of 24h measures session and in post processing we generate the GC (GBAS Correction). For this goal we use the software Pegasus V4.1 developed from EUROCONTROL. Generating the GC we have the possibility to study and monitor GBAS performance and integrity starting from a virtual functional architecture. The latter allows us to collect data without the necessity to found us authorization for the access to restricted area in airport where there is one GBAS installation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.621-622
• /
• 2017

In this paper, a low-complexity FFT processor is proposed for narrow-band interference signal cancellation based array antenna. The proposed FFT pocessor can support the variable length of 64, 128 and 512. By reducing number of non-tirval multipliers with mixed radix-4/2/4/2/4/2 algorithm and flexible multi-path delay commutator(MDC) architecture, the complexity of the proposed FFT processor is dramatically decreased. The proposed FFT processor was designed in Xilinx system generator and Implemented with Xilinx Virtex-7 FPGA. With the proposed architecture, the number of slices for the processor is 11454, and the number of DSP48s is 194.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.384-389
• /
• 2005

The objective on this project is to develop a cooperative Field Robot (FR), by using a customize Open Control Platform (OCP) as design and development process. An OCP is a CORBA-based solution for networked control system, which facilitates the transitioning of control designs to embedded targets. In order to achieve the cooperation surveillance system, two FRs are distributed by navigation messages (GPS and sensor data) using CORBA event-channel communication, while graphical information from IR night vision camera is distributed using CORBA Asynchronous Method Invocation (AMI). The QoS features of AMI in the network are to provide the additional delivery method for distributing an IR camera Images will be evaluate in this experiment. In this paper also presents an empirical performance evaluation from the variable chunk sizes were compared with the number of clients and message latency, some of the measurement data's are summarized in the following paragraph. In the AMI buffers size measurement, when the chuck sizes were change, the message latency is significantly change according to it frame size. The smaller frame size between 256 bytes to 512 bytes is more efficient fur the message size below 2Mbytes, but it average performance in the large of message size a bigger frame size is more efficient. For the several destination, the same experiment using 512 bytes to 2 Mbytes frame with 2 to 5 destinations are presented. For the message size bigger than 2Mbytes, the AMI are still able to meet requirement far more than 5 clients simultaneously.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.106-121
• /
• 2008

In this paper, we proposed and designed the protocol for energy efficiency and the center of data aiming at the design of a Multi Location Awareness System that recognizes a shadow site in parking and tunnel, which stands on the basis of CSS(Chirp Spread Spectrum) method using ISM Band of IEEE 802.15.4a that aware close location with wireless RF only. As a result of the protocol measurement, it displays the observation errors of less than 15cm, the data error rate of less than 5%, and can implement the Multi Location Awareness System with maximum length of life for 13.5 days using battery of 3V(1500 mAh).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.60-69
• /
• 2012

Public Transport Information Service which use smartphone Apps has received attention as the way of solution that reduced transport problem. Smartphone can offer real-time information because of a LBS(Location Based Service) system. This study try to find out which factor affect mode choice ratio of public transport, especially smartphone Apps. The result shows that rising oil price, traffic congestion, public information service with smartphone apps, BIS(Bus Information System) factors get 0.39, 0.27, 0.18, 0.16 scores with paired comparison. Younger and student respondents prefer smart phone public information service. Decision Tree shows that the most important decision factor is smartphone information service factor.