• ETRI Journal
• /
• v.28 no.2
• /
• pp.131-144
• /
• 2006

This work demonstrates a dead-reckoning (DR) scheme for a low-cost land navigation system and a DR/GPS system design using the sigma point Kalman filter (SPKF). T hrough an observability analysis and some simulations, it is shown that the performances of a stand-alone DR system and DR/GPS system can be improved by employing the proposed DR scheme and SPKF. By using the designed DR scheme and filter, the stand-alone DR system does not have any undetectable errors occurring on the curve trajectory. And the DR/GPS system can provide a stable and seamless navigational solution even in the case where the initial heading estimation error is large, such as 160 degrees, or when the GPS signal is unavailable due to tunnels, buildings, and so on. Simulation results indicate a satisfactory performance of the proposed system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.5-12
• /
• 2006

This study describes an SDINS/GPS/ZUPT integration algorithm for land navigation systems. The SDINS error can be decoupled in two parts. The first part is the the Schuler component which does not depend on object motion parameters, and the other is the Non-Schuler part which depends on the product of object acceleration and azimuth error. Azimuth error causes SDINS error in proportion to the traversed distance. The proposed system consists of a GPS/SDINS integration system and an SDINS/ZUPT integration system, which are both realized by an indirect feedforward Kalman filter. The main difference between the two is whether the estimate includes the Non-Schuler error or not, which is decided by the measurement type. Consequently, subtracting GPS/SDINS outputs from SDINS/ZUPT outputs provide the Non-Schuler error information which can be applied to improving azimuth accuracy. Simulation results using the raw data obtained from a van test attest that the proposed SDINS/GPS/ZUPT system is capable of providing azimuth improvement.

• The Journal of Korea Robotics Society
• /
• v.8 no.2
• /
• pp.129-135
• /
• 2013

In this paper, a high precision outdoor positioning system is newly proposed using multiple GPS receivers based on the Extended Kalman Filter (EKF). Typically, the GPS signal has the instantaneous errors that degrade the positioning seriously. Using the multiple GPS receivers instead of an expensive DGPS receiver, the positioning reliability and accuracy are improved in this research as a low cost solution. To incorporate the small displacement, an INS data have been tightly coupled to the GPS data, which has the inherit disadvantage of the cumulative error occurring over time. To achieve a stabilized and accurate positioning system, the multiple GPS receiver data are fused with the INS data through the EKF process. Through real navigation experiments of an outdoor mobile robot, the performance of the proposed system has been verified to be accurate comparable to DGPS system with a lower cost.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.2
• /
• pp.37-46
• /
• 2016

The difference between definition time of GPS (Global Positioning System) position data and actual display time of car positions on a map could reduce the accuracy of car positions displayed in PND (Portable Navigation Device)-type CNS (Car Navigation System). Due to the time difference, the position of the car displayed on the map is not its current position, so an improved method to fix these problems is required. It is expected that a method that uses predicted future positionsto compensate for the delay caused by processing and display of the received GPS signals could mitigate these problems. Therefore, in this study an analysis was conducted to correct late processing problems of map positions by mapmatching using a Kalman filter with only GPS position data and a RRF (Road Reduction Filter) technique in a light-weight CNS. The effects on routing services are examined by analyzing differences that are decomposed into along and across the road elements relative to the direction of advancing car. The results indicate that it is possible to improve the positional accuracy in the along-the-road direction of a light-weight CNS device that uses only GPS position data, by applying a Kalman filter and RRF.

• International Journal of Aeronautical and Space Sciences
• /
• v.7 no.2
• /
• pp.56-69
• /
• 2006

For a relatively small country like Korea, a radionavigation system using airships can be considered, which is to provide the navigation service utilizing the stratospheric airships that are deployed in the stratosphere at the altitude of around 20-23km, and which is an independent or a back-up radionavigation system other than current GPS or GLONASS. In this paper, a feasibility study on the constellation of stratospheric airships for the navigation system has been performed. A measure of a geometrical condition between a receiver and navigation transmitters. called the DOP (Dilution of Precision), determines the resulting positioning error of the navigation system, if the error of range measurement is predictable. Therefore, with assumption that the range measurement error of the stratospheric airship navigation system is quite similar to GPS. the several DOP values have been used to evaluate the performance of the navigation system with comparing with the DOP values of GPS as the reference values. To provide the position information of the navigation transmitters to users, a receiver cluster system fixed on the ground, called an IGPS (inverted GPS), is proposed, and the error is also evaluated using the DOP values. Five areas around five major cities in South Korea have been selected, and then by numerical simulations the DOP values are compared those of GPS to assess the performance of the proposed navigation system using stratospheric airships. The possible frequency bands have been proposed. and then link budget of the navigation transmitter has been analyzed for the proposed navigation system.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.333-339
• /
• 2022

The satellite navigation system was developed for the purpose of calculating the location of local users, starting with the Global Positioning System (GPS) in the 1980s. Advanced countries in the space industry are operating Global Navigation Satellite System (GNSS) that covers the entire earth, such as GPS, GLONASS, Galileo, and BeiDou, by establishing satellite navigation systems for each country. Regional Navigation Satellite Systems (RNSS) such as QZSS and NavIC are also in operation. In the early 2010s, only GPS and GLONASS could calculate location using a single system for location determination. After 2016, the EU and China also completed the establishment of GNSS such as Galileo and BeiDou. As a result, satellite navigation users can benefit from improved availability of GNSS. In addition, before Galileo and BeiDou's Full Operational Capability (FOC) declaration, they used combined navigation algorithms to calculate the user's location by adding another satellite navigation system to the GPS satellites. Recently, it may be possible to calculate a user's location for each navigation system using the resources of a single system. In this paper, we evaluated the performance of single system navigation and combined navigation solutions of GPS, GLONASS, Galileo, BeiDou and QZSS individual navigation systems using high-performance GNSS receivers.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.8
• /
• pp.95-99
• /
• 2018

This research is related to GPS(global positioning system) enabled device navigation service and consists of two parts. The first is the logic that records the route guidance video and records GPS information in time, and the second is the logic that outputs the created video data based on real time GPS. The recording logic first determines the origin and destination, records the video from the origin to the destination and it adjusts the speed of the image in a specific area so that the user can see it easily. And insert ancillary information and advertisements that can help guide the route. In the output logic, we provide navigation services using the video and GPS data tables we created, and it receives user's GPS information in real time and corrects it based on the recent user location to reduce errors. This provides local guidance services to people who lack language skills like foreigners.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.47-52
• /
• 2006

In recent years, there is a strong urge to introduce GPS systems which can role in reference points and measure global positions to the field of structural measurements. In this study, a new structural measurement system using low-cost L1 single frequency GPS receivers instead of conventional expensive RTK L1&L2 dual frequency GPS receiver. This system consists of GPS OEM board, GPS antenna, wireless access points, and monitoring program based on Lambda method and makes it possible to apply to monitor a static behavior of large scaled Infra-structures, such as dams, tall buildings, road slops.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.27-35
• /
• 2008

A navigation system is one of the important components of an unmanned ground vehicle (UGV). A GPS receiver collects data signals transmitted by (Earth orbiting) satellites. However, these data signals may contain many errors resulting misinformation and depending on one's position (environment), reception may be impossible. The proposed self-driven algorithm uses three low-cost GPS in order to minimize errors of existing inexpensive single GPS's driving algorithm. By using reliable final data, which is analyzed and combined from each of three GPS's received data signals, gathering a vehicle's steering performance information and its current pin-point position is improved even with error containing signals or from a place where signal gathering is impossible. The purpose of this thesis is to explain navigation system algorithm using multiple GPS and compass sensor and prove the algorithm through experiments.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.4
• /
• pp.219-226
• /
• 2000

Ship's position data obtaining method is one of the very important factor in navigation. Nowadays, GPS(Global Positioning System) using the earth orbiting satellites are equipped and operated for the position finding. Because it provides more precise position information than other equipments and is very convenient for navigator. In this study, it is designed to develop the GPS simulator for everybody being able to practise the GPS operating skill like as navigation planning, navigation calculating etc. And also, it can be operated with personal computer without real GPS receiver. This simulation system is based on the real GPS receiver and built by the visual basic 5.0 program. And it displays the ship's position and navigating information and plots the ship's moving track on the screen in real time according as initial setup data-main engine's rpm, rudder angle, departure position and waypoint.