• Title/Summary/Keyword: GPS speed

검색결과 310건 처리시간 0.033초

Performance Requirement of Ship's Speed in Docking/Anchoring Maneuvering

  • Tatsumi, Kimio;Fujii, Hidenobu;Kubota, Takashi;Okuda, Shigeyuki;Arai, Yasuo;Kouguchi, Nobuyoshi;Yamada, Kozaburo
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
    • /
    • pp.67-72
    • /
    • 2006
  • Questionnaire survey on performance requirement of ship’s speed such as not only accuracy but also response and robustness were carried out, and the experiments to survey the GPS performances of static and dynamic characteristics were carried out simultaneously. In this paper, the questionnaire survey focusing on docking maneuvering, some analytic results of the survey, the results of GPS performance, and the possibility of adaptation for docking maneuvering on SDME and GPS are discussed. Consequently, from the results of questionnaire survey the performance requirement of ship’s speed in docking/anchoring maneuvering have need under 1cm/sec on the standard deviation, and speed information from GPS was adopted to use maneuvering information in docking/anchoring.

  • PDF

제한된 GPS정보를 활용한 통행 시간 추정 알고리즘에 관한 연구 (A Study on Algorithm for Travel Time Estimation using Restricted GPS Data)

  • 유남현
    • 한국전자통신학회논문지
    • /
    • 제9권12호
    • /
    • pp.1373-1380
    • /
    • 2014
  • 교통정보서비스에서 정확한 통행량과 통행속도를 산출하기 위해서는 기본적으로 제공되는 GPS 데이터의 품질이 보장되어야 한다. 그렇지만, 통신비용의 문제로 인하여 GPS 데이터를 제공하는 Probe 차량으로부터 제한된 GPS 데이터가 제공이 된다면 정확한 정보를 제공하기 어렵다. 본 논문에서는 제한된 GPS 데이터로 인하여 손실되는 링크들을 위상정보와 결합시켜 복원시킨 후, 통행 속도를 산출하는 알고리즘을 개발하였다. 이를 적용한 S시의 T 교통정보서비스는 이전보다 더 정확한 통행량 및 통행 속도를 시민들에게 제공할 수 있게 되었다.

GPS와 가속도계를 이용한 이동 물체의 속도 추정 (Speed Estimation of Moving Object using GPS and Accelerometer)

  • 염정남;이금분;박종민;조범준
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2008년도 춘계종합학술대회 A
    • /
    • pp.425-428
    • /
    • 2008
  • 본 논문에서는 위성 항법 시스템(GPS)의 불연속성과 수신 음영 지역에서의 속도 추적 한계를 극복하기 위하여 가속도계와 GPS를 이용한 이동 물체의 속도를 추정하는 시스템을 제안한다. 시스템은 이동 물체에 부착된 GPS 수신기와 가속도계의 항법 정보를 입력받아 물체의 진동과 충격 그리고 가속도계 자체의 오차에 기인한 잡음을 보정하고, 이를 이용하여 GPS 음영 지역에서 이동 물체의 속도 추정과 GPS 항법 정보의 불연속성을 보완할 수 있도록 설계되었다. 본 시스템에 사용하기 위해 GPS와 가속도계를 이용한 칼만 필터 구조를 설계하고, GPS 수신 음영 지역에서도 물체의 속도를 추적할 수 있음을 검증하여, 향후 자동항법장치 등 텔레매틱스 산업에서의 응용 가능성을 제시하고자 한다.

  • PDF

차량 운동에 따른 GMLAN 차량 속도와 실제 차량 속도 비교 (A COMPARATIVE STUDY BETWEEN GMLAN SPEED AND GPS REPORTED VEHICLE SPEED BY VEHICLE MANEUVER)

  • 원유진;김진원;강성기
    • 자동차안전학회지
    • /
    • 제5권1호
    • /
    • pp.16-24
    • /
    • 2013
  • Some GM (General Motors) vehicles are using a GMLAN (General Motors Local Area Network) communication protocol for control and diagnostics. The airbag control module uses vehicle speed information from the GMLAN to record the vehicle speed as pre-crash information. In order to use the vehicle speed information for crash reconstruction purposes, it helps to be able to understand the accuracy of the data. The actual vehicle speed is not expected to be the same as the GMLAN indicated speed in some situations like a spin or if there is hard braking. This paper compares the actual vehicle speed and vehicle speed information during specific vehicle maneuvers. Actual vehicle speed is calculated from a GPS sensor, while GMLAN vehicle speed is calculated from transmission output sensor by the Engine control module (ECM). Vehicle maneuvers defined as Mode #1, Mode #2, Mode #3. The Mode #1 maneuver simulates wheel lock-up and skidding f by hard-braking at a specific speed. The Mode #2 maneuver simulates a 90degree turn using a J-turn maneuver at a specific speed. The Mode#3 maneuver simulates a 180 degree turn using a spin type of maneuver at a specific speed. The study then compares the GMLAN speed and GPS speed to see what speed difference exists between them. The results of this paper are applicable to GM vehicles only. This paper catalogs the performance and limitations of two vehicles as useful reference for crash reconstructions where there is a need to understand the speed indicated in the pre-crash section of the SDM data.

RTK-GPS에 의한 노선측량에서 이동국의 속도에 따른 정확도 분석 (Accuracy Analysis of RTK-GPS Rover Speed in Route Surveying)

  • 최병길;이형수
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2004년도 춘계학술발표회논문집
    • /
    • pp.139-144
    • /
    • 2004
  • This study aims to analyze the accuracy of rover speed change in route surveying using RTK-GPS. Route surveying methods using GPS contain Static, DGPS, and RTK-GPS. Much research of navigation system, positioning of vehicles by DGPS, and accuracy analysis by GPS surveying have already been done. From this study, it is firstly found that DGPS is suitable for car navigation and sea navigation with an error of meter scale but not good for detailed construction, designing maps and updating GIS databases. Secondly, RTK-GPS can be used for managing gas pipes, water supply and drain pipes and fiber-optic cable that are needed to be controlled in a real time basis. Thirdly, since the accuracies of route surveying by RTK-GPS and DGPS are not correctly matched with the change of rover speed, the choice of route surveying method from those two should follow the need of accuracy fidelity Further study should focus on Cycle Slip problem and coordinate change problem in tunnel and mountainous areas.

  • PDF

데이터 사전처리에 의한 GPS 성능 개선 알고리즘 (Algorithm for Improving GPS Performance by Data Pre-processing)

  • 이재훈;홍원철;김현수;전창완
    • 제어로봇시스템학회논문지
    • /
    • 제12권8호
    • /
    • pp.752-758
    • /
    • 2006
  • A GPS receiver provides much information such as calculated position, speed, heading, status of satellites, current time errors, etc. It is well-known that GPS signals from GPS receiver mounted on moving vehicle are often distorted, contaminated by various noises, and blocked by tunnel or tall buildings. The phenomenon often obstructs correct navigation especially when a vehicle keeps stopping or is moving in low speed. Therefore it is needed to pre-process the signals to adapt it to various applications. In this paper, an algorithm to pre-process the signals is proposed. For this, GPS data obtaining from uNAV GPS receiver are analyzed and classified based on dynamic characteristic. Then, the proposed algorithm is applied to the data and some test results are shown to verify the usefulness of the algorithm.

GPS 운행궤적정보를 이용한 표준링크기반 통행속도 산출 시스템 연구 (A Study on the Standard Link-based Travel Speed Calculation System Using GPS Tracking Information)

  • 송길종;황재선;임재중;정의용
    • 한국ITS학회 논문지
    • /
    • 제18권5호
    • /
    • pp.142-155
    • /
    • 2019
  • 본 연구는 택시 GPS 프로브 정보를 수집하여 링크 결손 방지와 링크 진출 입 시각을 판단하여 표준링크기반의 통행속도 정확도를 향상시키기 위한 시스템 개발을 목적으로 진행되었다. 이를 위해 표준링크기반 맵매칭과 개별차량 통행속도를 산출하고 이를 이용해 서비스링크 평균 통행속도 산출을 위한 5단계 과정으로 구성된 프레임워크와 알고리즘을 제시하였다. 그리고 테헤란로와 학동로 두 곳의 현장 조사를 실시하여 본 논문에서 제시한 방법에 의한 결과를 검증하였다. 현장조사 전체시간 기준으로, 통행속도 편차는 0.2km/h와 0.6km/h, 정확도는 99%와 96%, 그리고 MAPE(Mean Absolute Percentage Error)는 1%와 4%로 나타났다. 결과적으로 표준링크를 사용하지 않는 기존 방법론보다 우수한 정확도를 보였다.

Two-antenna 자세 결정용 GPS 수신기와 DR 센서의 통합 시스템 (A Two-antenna GPS Receiver Integrated with Dead Reckoning Sensors)

  • 이재호;서홍석;성태경;박찬식;이상정
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.186-186
    • /
    • 2000
  • In the GPS/DR integrated system, the GPS position(or velocity) is used to compensate the DR output and to calibrate errors in the DR sensor. This synergistic relationship ensures that the calibrated DR accuracy can be maintained even when the GPS signal is blocked. Because of the observability problem, however, the DR sensors are not sufficiently calibrated when the vehicle speed is low. This problem can be solved if we use a multi-antenna GPS receiver for attitude determination instead of conventional one. This paper designs a two-antenna GPS receiver integrated with DR sensors. The proposed integration system has three remarkable features. First, the DR sensor can be calibrated regardless of the vehicle speed with the aid of two-antenna GPS receiver. Secondly, the search space of integer ambiguities in GPS carrier-phase measurements is reduced to a part of the surface of the sphere using DR heading. Thirdly, the detection resolution of cycle-slips in GPS carrier-phase measurements is improved with the aid of DR heading. From the experimental result, it is shown that the search grace is drastically reduced to about 3120 of the non-aided case and the cycle-slips of 1 or half cycle can be detected.

  • PDF

자세 결정용 GPS 수신기와 DR을 이용한 통합 시스템 (An attitude determination GPS Receiver Integrated with Dead Reckoning Sensors)

  • 이재호;서흥석;성태경;이상정
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제50권2호
    • /
    • pp.72-79
    • /
    • 2001
  • In the GPS/DR integrated system, the GPS position(or velocity) is used to compensate the DR output and to calibrate errors of the DR sensor. This synergistic relationship ensures that the calibrated DR accuracy can be maintained even when the GPS signal is blocked. Because of the observability problem, however, the DR sensors are not sufficiently calibrated when the vehicle speed is low. This problem can be solved if we use a multi-antenna GPS receiver for attitude determination instead of conventional one. This paper designs a two-antenna GP receiver integrated with DR sensors. The proposed integration system has three remarkable features. First, the DR sensor can be calibrated regardless of the vehicle speed with the aid of two-antenna GPS receiver. Secondly, the search space of integer ambiguities in GPS carrier-phase measurements is reduced to a part of the surface of the sphere using DR heading. Thirdly, the detection resolution of cycle-slips in GPS carrier-phase measurements is improved with the aid of DR heading. From the experimental result, it is shown that the search space is drastically reduced to about 3/20 of the non-aided case and the cycle-slips of 1 or half cycle can be detected.

  • PDF