• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.67-72
• /
• 2006

Questionnaire survey on performance requirement of ship’s speed such as not only accuracy but also response and robustness were carried out, and the experiments to survey the GPS performances of static and dynamic characteristics were carried out simultaneously. In this paper, the questionnaire survey focusing on docking maneuvering, some analytic results of the survey, the results of GPS performance, and the possibility of adaptation for docking maneuvering on SDME and GPS are discussed. Consequently, from the results of questionnaire survey the performance requirement of ship’s speed in docking/anchoring maneuvering have need under 1cm/sec on the standard deviation, and speed information from GPS was adopted to use maneuvering information in docking/anchoring.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1373-1380
• /
• 2014

In order to calculate accurate traffic and traffic speed, qualified and sufficient GPS data should be provided. However, it is difficult to provide accurate traffic information using restricted GPS data from probe vehicles because of communication costs. This paper developed a algorithm that recovers links omitted by restricted GPS data with topology information, and calculate traffic speed with original links and recovered links. T traffic information service of city with a new algorithm can provide more accurate traffic and traffic speed than the original system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.425-428
• /
• 2008

To overcome the limitation of tracking speed on signal-shaded area and the discontinuity of GPS, we present a system which estimates the speed of moving object using GPS and accelerometer. This system is designed to correct accelerometer's noises which are caused by vibration and impact to the object and errors of itself, from the navigation information of GPS receiver and accelerometer which are installed to moving object. And using this information, it estimates the speed of moving object on GPS signal-shaded area to complement discontinuity of GPS navigation information. We designed Kalman Filter structure using GPS and accelerometer to apply this system, and verify that the system can estimate object's speed on GPS signal-shaded area. Finally, we present the possibilities applying to telematics systems like automatic navigation system.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.1
• /
• pp.16-24
• /
• 2013

Some GM (General Motors) vehicles are using a GMLAN (General Motors Local Area Network) communication protocol for control and diagnostics. The airbag control module uses vehicle speed information from the GMLAN to record the vehicle speed as pre-crash information. In order to use the vehicle speed information for crash reconstruction purposes, it helps to be able to understand the accuracy of the data. The actual vehicle speed is not expected to be the same as the GMLAN indicated speed in some situations like a spin or if there is hard braking. This paper compares the actual vehicle speed and vehicle speed information during specific vehicle maneuvers. Actual vehicle speed is calculated from a GPS sensor, while GMLAN vehicle speed is calculated from transmission output sensor by the Engine control module (ECM). Vehicle maneuvers defined as Mode #1, Mode #2, Mode #3. The Mode #1 maneuver simulates wheel lock-up and skidding f by hard-braking at a specific speed. The Mode #2 maneuver simulates a 90degree turn using a J-turn maneuver at a specific speed. The Mode#3 maneuver simulates a 180 degree turn using a spin type of maneuver at a specific speed. The study then compares the GMLAN speed and GPS speed to see what speed difference exists between them. The results of this paper are applicable to GM vehicles only. This paper catalogs the performance and limitations of two vehicles as useful reference for crash reconstructions where there is a need to understand the speed indicated in the pre-crash section of the SDM data.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.139-144
• /
• 2004

This study aims to analyze the accuracy of rover speed change in route surveying using RTK-GPS. Route surveying methods using GPS contain Static, DGPS, and RTK-GPS. Much research of navigation system, positioning of vehicles by DGPS, and accuracy analysis by GPS surveying have already been done. From this study, it is firstly found that DGPS is suitable for car navigation and sea navigation with an error of meter scale but not good for detailed construction, designing maps and updating GIS databases. Secondly, RTK-GPS can be used for managing gas pipes, water supply and drain pipes and fiber-optic cable that are needed to be controlled in a real time basis. Thirdly, since the accuracies of route surveying by RTK-GPS and DGPS are not correctly matched with the change of rover speed, the choice of route surveying method from those two should follow the need of accuracy fidelity Further study should focus on Cycle Slip problem and coordinate change problem in tunnel and mountainous areas.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.752-758
• /
• 2006

A GPS receiver provides much information such as calculated position, speed, heading, status of satellites, current time errors, etc. It is well-known that GPS signals from GPS receiver mounted on moving vehicle are often distorted, contaminated by various noises, and blocked by tunnel or tall buildings. The phenomenon often obstructs correct navigation especially when a vehicle keeps stopping or is moving in low speed. Therefore it is needed to pre-process the signals to adapt it to various applications. In this paper, an algorithm to pre-process the signals is proposed. For this, GPS data obtaining from uNAV GPS receiver are analyzed and classified based on dynamic characteristic. Then, the proposed algorithm is applied to the data and some test results are shown to verify the usefulness of the algorithm.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.261-261
• /
• 2017

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.142-155
• /
• 2019

This study was conducted with the aim of developing a system to collect taxi GPS probe information to prevent link defects and to improve the accuracy of the standard link-based travel speed by determining when to go into and come out the link. For this purpose, a framework and algorithm consisting of a five-step process for standard link-based map matching and individual vehicle travel speed are presented and used it to calculate the average travel speed of the service link. Two on-site surveys of Teheran and Hakdong-ro were conducted to verify the results by the methods proposed in this paper. On the basis of the overall time of the field survey, the deviation in the travel speed was 0.2 km/h and 0.6 km/h, the accuracy was 99% and 96%, and the MAPE(Mean Absolute Percentage Error) was 1% and 4% in Teheran and Hakdong-ro, respectively. These results were more accurate thand those obtained using conventional methodologies without standard links.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.186-186
• /
• 2000

In the GPS/DR integrated system, the GPS position(or velocity) is used to compensate the DR output and to calibrate errors in the DR sensor. This synergistic relationship ensures that the calibrated DR accuracy can be maintained even when the GPS signal is blocked. Because of the observability problem, however, the DR sensors are not sufficiently calibrated when the vehicle speed is low. This problem can be solved if we use a multi-antenna GPS receiver for attitude determination instead of conventional one. This paper designs a two-antenna GPS receiver integrated with DR sensors. The proposed integration system has three remarkable features. First, the DR sensor can be calibrated regardless of the vehicle speed with the aid of two-antenna GPS receiver. Secondly, the search space of integer ambiguities in GPS carrier-phase measurements is reduced to a part of the surface of the sphere using DR heading. Thirdly, the detection resolution of cycle-slips in GPS carrier-phase measurements is improved with the aid of DR heading. From the experimental result, it is shown that the search grace is drastically reduced to about 3120 of the non-aided case and the cycle-slips of 1 or half cycle can be detected.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.2
• /
• pp.72-79
• /
• 2001

In the GPS/DR integrated system, the GPS position(or velocity) is used to compensate the DR output and to calibrate errors of the DR sensor. This synergistic relationship ensures that the calibrated DR accuracy can be maintained even when the GPS signal is blocked. Because of the observability problem, however, the DR sensors are not sufficiently calibrated when the vehicle speed is low. This problem can be solved if we use a multi-antenna GPS receiver for attitude determination instead of conventional one. This paper designs a two-antenna GP receiver integrated with DR sensors. The proposed integration system has three remarkable features. First, the DR sensor can be calibrated regardless of the vehicle speed with the aid of two-antenna GPS receiver. Secondly, the search space of integer ambiguities in GPS carrier-phase measurements is reduced to a part of the surface of the sphere using DR heading. Thirdly, the detection resolution of cycle-slips in GPS carrier-phase measurements is improved with the aid of DR heading. From the experimental result, it is shown that the search space is drastically reduced to about 3/20 of the non-aided case and the cycle-slips of 1 or half cycle can be detected.