• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.615-622
• /
• 2015

Recently Digital-TachoGraph(DTG) was mounted mandatorily in commercial vehicles(Taxi, Bus, etc.). DTG records accurate and detailed information of the running state of vehicles related to traffic accident, such as Time, Distance, Velocity, RPM, Brake ON/OFF, GPS, Azimuth, Acceleration. Thus those standardized data can play an important role in traffic accident investigation and reconstruction. To develope the accurate and objective method using the DTG data for the reconstruction of traffic accident, we had conducted several tests such as driving test, high speed circuit test, braking test, slalom test at Korea Automobile Testing & Research Institute(KATRI), and collision test at Korea Automobile insurance repair Research and Training center(KART) with the vehicle equipped with several DTG. Development of the program which enables the reading and analysis of the DTG data was followed. In the experiments, we have found velocity error, RPM error, brake signal error and azimuth error in several products, and also non-continuous event data. The cause of these errors was deduced to be related to the correction factor, the durability of electronic parts and the algorithm.

• Journal of Biosystems Engineering
• /
• v.25 no.4
• /
• pp.301-310
• /
• 2000

An autonomous tractor system was developed and its performance was evaluated. The system consisted of a tractor system of and a remote control station. The tractor and the remote control station communicated each other via wireless modems. The tractor had a DGPS(differential global positioning system), sensors, a controller and a modem. The DGPS collected position data and the tractor status was estimated. The information of tractor status and sensors was transferred to the remote control station. Then, the control station determined the control data such as steering angles using a fuzzy controller. The fuzzy controller used the information from the DGPS, sensors, and GIS(geographic information system) data. The control data were obtained by remote signal processing at the control station The control data for autonomous operation were transferred to the tractor controller. The performances of an autonomous tractor were evaluated for various speeds, different initial positions and different initial headings. About 1.3 seconds of time lag was occurred in transferring the tractor status data and the control data. Compensation the time lag, about 27cm deviation was observed at the speed of 0.5m/s and 37cm at the speed of 1m/s. Error caused mainly by the time lag and it would be reduced by developing a full-duplex radio module for controlling the remote tractor.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.2
• /
• pp.199-210
• /
• 2009

Even though there are several Global Navigation Satellite Systems under development, only GPS and GLONASS are currently available for satellite positioning. In this study, GLONASS orbits were predicted from broadcast ephemeris using the 4th-order Runge-Kutta numerical integration. For accuracy validation, predicted orbits were compared with precise ephemeris. The RMS(Root Mean Square) and maximum 3-D errors were 14.3 km and 17.4 km for one-day predictions. In case of 7-day predictions, the RMS and maximum 3-D errors were 15.7 and 40.1 km, respectively. Also, the GLONASS satellite visibility predictions were compared with real observations, and they agree perfectly except for several epochs when the satellite signal was blocked by nearby buildings.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.169-174
• /
• 2002

In this paper, we suggest a new spatial information system called video GIS where video is used for spatial data construction and is integrated with map. We develop a prototype system of video GIS and apply it to roadside facility management. The main functions supported by the suggested system are data collection, coordinate calculation and conversion, data construction, analysis, searching, and browsing. The stereo images and corresponding position data are collected by a vehicle named 4S-Van that has GPS, IMU, and cameras. The 3-D coordinates of the objects in the images, such as road sign, signal lamp, and building, can be calculated and constructed from the collected data. The spatial objects are displayed on both image and map, and can be searched and browsed, which enables visual and realistic browsing and management of spatial objects. Compared to conventional field survey used in roadside facility management, the method enables faster, easier, and more efficient construction of spatial data. The suggested video GIS can be applied not only to roadside facility management but also to many similar projects of central or local governments that are related to GIS.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.7
• /
• pp.93-100
• /
• 2019

In this paper, we propose an intelligent marketing service system that can provide custom advertisements and events to both businesses and customers by identifying the location and contents using the ultrasonic signals and feature information in voice signals. We also develop the encoding and decoding algorithm of ultrasonic signals for this system and analyze the performance evaluation results. With the development of the hyper-connected society, the on-line marketing has been activated and is growing in size. Existing store marketing applications have disadvantages that customers have to find out events or promotional materials that the headquarters or stores throughusing the corresponding applications whenever they visit them. To solve these problems, there are attempts to create intelligent marketing tools using GPS technology and voice recognition technology. However, this approach has difficulties in technology development due to accuracy of location and speed of comparison and retrieval of voice recognition technology, and marketing services for customer relation are also much simplified.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.515-519
• /
• 2021

IEEE 1588 PTP is a precision time protocol in which two systems synchronize without the aid of GPS by exchanging packets including transmission/reception time information. In the time synchronization process, the propagation delay time can be calculated and the distance between the two systems can be measured using this. In this paper, we proposed a method to improve the distance measurement precision less than the modulation symbol period using the timing error information extracted from the preamble of the received packet. Computer simulations show that the distance measurement precision is proportional to the length of the preamble PN sequence and the signal-to-noise ratio.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.2
• /
• pp.75-82
• /
• 2021

Fields of high-precision positioning applications are growing fast across the mass market worldwide. Accordingly, the industry is focusing on developing methods of applying State-Space Representation (SSR) corrections on low-cost GNSS receivers. Among SSR correction types, this paper analyzes Safe Position Augmentation for Real Time Navigation (SPARTN) messages being offered by the SAfe and Precise CORrection DAta (SAPCORDA) company and validates positioning algorithms based on them. The first part of this paper introduces the SPARTN format in detail. Then, procedures on how to apply Basic-Precision Atmosphere Correction (BPAC) and High-Precision Atmosphere Correction (HPAC) messages are described. BPAC and HPAC messages are used for correcting satellite clock errors, satellite orbit errors, satellite signal biases and also ionospheric and tropospheric delays. Accuracies of positioning algorithms utilizing SPARTN messages were validated with two types of positioning strategies: Code-PPP using GPS pseudorange measurements and PPP-RTK including carrier phase measurements. In these performance checkups, only single-frequency measurements have been used and integer ambiguities were estimated as float numbers instead of fixed integers. The result shows that, with BPAC and HPAC corrections, the horizontal accuracy is 46% and 63% higher, respectively, compared to that obtained without application of SPARTN corrections. Also, the average horizontal and vertical RMSE values with HPAC are 17 cm and 27 cm, respectively.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.4
• /
• pp.319-325
• /
• 2020

In order to propose new satellite navigation signals, it is essential to analyze the increased level of interference effect that the existing signals suffer. In this paper, a method for estimating the power density of the interference signals on GPS signals is proposed before and after the additional transmission of the KPS signals in the L1, L2 and L5 bands. For estimation, we assume the number of visible satellites observed over the Korean peninsular and the minimum received power of the satellite navigation signals. The comparison of the estimated values shows that the power density of the interfering signal increases by up to 1.37 dB due to the introduction of KPS, but this leads to an increase in interference plus noise power density below 0.47 dB.

• Journal of Platform Technology
• /
• v.10 no.1
• /
• pp.3-10
• /
• 2022

In high-risk workplaces where communication is not possible, such as deforestation, it is necessary to use equipment that monitors the worker's situation in real time and obtains information according to the worker's location in case of an emergency. This paper analyzes the development and demonstration experiments of smart hard hats for deforestation workers to maintain a safe working environment. The developed smart helmet identifies the location of the worker based on the UWB signal for location estimation, and it is necessary to keep the distance between the workers not too close. UWB, Gyro, and LoRa are used to communicate even in the communication shadow area. It is used to provide a safe working environment such as improved construction to reduce worker risks and risks in forest working environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.47-49
• /
• 2022

IPS is an indoor positioning system that replaces GPS, which is less accurate due to walls and roofs inside buildings. Radio signals such as Wi-Fi are used instead of satellite signals, and complex methods are being used to increase accuracy. In this paper, we present a more efficient positioning method than before by applying high-level signals to high-accuracy fingerprint techniques. A radio map is configured with high-level signals collected by utilizing Wi-Fi APs, which are more than in the past. The suitability of use was confirmed by analyzing the pattern represented by the configured radio map for each location.