• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.9
• /
• pp.723-732
• /
• 2016

This paper proposes an approach to fused navigation of an unmanned surface vehicle(USV) and to detection of the outlier or interference of global positioning system(GPS). The method fuses available sensor measurements through extended Kalman filter(EKF) to find the location and attitude of the USV. The method uses error covariance of EKF for detection of GPS outlier or interference. When outlier or interference of the GPS is detected, the method excludes GPS data from navigation process. The measurements to be fused for the navigation are GPS, acceleration, angular rate, magnetic field, linear velocity, range and bearing to acoustic beacons. The method is tested through simulated data and measurement data produced through ground navigation. The results show that the method detects GPS outlier or interference as well as the GPS recovery, which frees navigation from the problem of GPS abnormality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.317-323
• /
• 1998

A synchronization is important element not only wire communication but also wireless communication. Especially, In SS(Spread Spectrum) communication method used GPS(Global Positioning System) synchronization is more important. A synchronous oscillator(SO) is a network which synchronizes, tracks, filter, amplifies and divides (if necessary) in a single process. Without an input signal, the SO is a free-running oscillator, oscillating at a frequency $w_0$, but phase changes $180^{\circ}$ within tracking range of SO. Therefore CPSO was used for this problem. The coherent phase synchronous oscillator(CPSO) is created by adding two external loops to the SO and has a wider tracking bandwidth and a zero-offset phase response (coherent) while maintaining the SO properties of high signal-to-rejection and fast frequency acquisition times. Therefore phase between input signal and output signal is synchronized. In this paper, GPS data recovery circuit has applied CPSO using front reference characters and has certified an excellent data recovery capability.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.4
• /
• pp.444-452
• /
• 2003

An integration system with multi-measurement sets can be realized via combined application of a centralized and federated Kalman filter. It is difficult for the centralized Kalman filter to remove a failed sensor in comparison with the federated Kalman filter. All varieties of Kalman filters monitor innovation sequence (residual) for detection and isolation of a failed sensor. The innovation sequence, which is selected as an indicator of real time estimation error plays an important role in adaptive mechanism design. In this study, the centralized Kalman filter with adaptive measurement fusion is introduced by means of innovation sequence. The objectives of adaptive measurement fusion are automatic isolation and recovery of some sensor failures as well as inherent monitoring capability. The proposed adaptive filter is applied to the GPS/SDINS integration system with an additional sensor. Simulation studies attest that the proposed adaptive scheme is effective for isolation and recovery of immediate sensor failures.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.149-152
• /
• 1998

A synchronization is very important element not only wire communication but also wireless communication. A synchronous oscillator(SO) is a network which synchronizes, tracks, filter, amplifies and divides (if necessary) in a single process. The coherent phase synchronous oscillator(CPSO) is created by adding two external loops to the SO. The CPSO ratains all virtues of a SO while providing coherency throughout the tracking range. This paper has applied a clock recovery of GPS signal using CPSO.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.2
• /
• pp.98-109
• /
• 2010

This paper deals with a new method of unmanned aerial vehicle (UAV) recovery when a UAV fails to get a global positioning system (GPS) signal at an unprepared site. The proposed method is based on the simultaneous localization and mapping (SLAM) algorithm. It is a process by which a vehicle can build a map of an unknown environment and simultaneously use this map to determine its position. Extensive research on SLAM algorithms proves that the error in the map reaches a lower limit, which is a function of the error that existed when the first observation was made. For this reason, the proposed method can help an inertial navigation system to prevent its error of divergence with regard to the vehicle position. In other words, it is possible that a UAV can navigate with reasonable positional accuracy in an unknown environment without the aid of GPS. This is the main idea of the present paper. Especially, this paper focuses on path planning that maximizes the discussed ability of a SLAM algorithm. In this work, a SLAM algorithm based on extended Kalman filter is used. For simplicity's sake, a blimp-type of UAV model is discussed and three-dimensional pointed-shape landmarks are considered. Finally, the proposed method is evaluated by a number of simulations.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.1
• /
• pp.63-70
• /
• 2011

The needs for satellite formation flying are gradually increasing to perform the advanced space missions in remote sensing and observation of the space or Earth. Formation flying in low Earth orbit can perform the scientific missions that cannot be realized with a single spacecraft. One of the various techniques of satellite formation flying is the determination of the precise baselines between the satellites within the formation, which has to be in company with the precision validation. In this paper, the baseline of Gravity Recovery and Climate Experiment (GRACE) A and B was determined with the real global positioning system (GPS) measurements of GRACE satellites. And baseline precision was validated with the batch and sequential processing methods using K/Ka-band ranging system (KBR) biased range measurements. Because the proposed sequential method validate the baseline precision, removing the KBR bias with the epoch difference instead of its estimation, the validating data (KBR biased range) are independent of the data validated (GPS-baseline) and this method can be applied to the real-time precision validation. The result of sequential precision validation was 1.5~3.0 mm which is similar to the batch precision validation.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.25.3-25.3
• /
• 2011

지구 또는 우주 원격탐사 및 관측에서 진일보한 임무 수행을 위해 위성 편대 비행의 필요성이 점차 부상하고 있다. 편대 비행은 단일 위성으로는 실현하기가 어렵거나 불가능한 과학적인 임무를 수행할 수 있다. 다양한 위성 편대 비행 기술에서 중요한 기술 중에 하나는 편대 위성간의 정밀기선결정 기술이며, 정밀도 검증 기술도 함께 동반되어야 한다. 이 논문에서는 Gravity Recovery and Climate Experiment(GRACE) 위성의 실제 Global Positioning System(GPS) 데이터를 사용하여 GRACE A와 B 두 위성의정밀기선결정을 수행하였다. 그리고 K/Ka-Band Ranging system(KBR) 바이어스 거리측정값으로 일괄처리 및 순차처리 방법을 통해 정밀도를 검증하였다. 제안된 순차처리 방법은 KBR 바이어스를 추정하는 대신에 기산점 차분으로 이를 제거하여 정밀도를 검증하기 때문에 검증자(KBR baised range)가 피검증자(GPS-baseline)와 독립적이고 실시간 정밀도 검증에 적용이 가능하다. 그 결과 일괄처리 검증방법과 유사한 1.5 ~ 3.0 mm의 순차처리 정밀도 검증 결과를 얻었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2461-2466
• /
• 2003

This paper presents a simple sensor fusion algorithm using neural network for navigation of mobile robots with obstacle avoidance and trap recovery. The multiple sensors input sensor data to the input layer of neural network activating the input nodes. The multiple sensors used include optical encoders, ultrasonic sensors, infrared sensors, a magnetic compass sensor, and GPS sensors. The proposed sensor fusion algorithm is combined with the VFH(Vector Field Histogram) algorithm for obstacle avoidance and AGPM(Adaptive Goal Perturbation Method) which sets adaptive virtual goals to escape trap situations. The experiment results show that the proposed low-level fusion algorithm is effective for real-time navigation of mobile robot.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.228-236
• /
• 2008

Recently augmented reality technology has been researched to view the virtual shape of buildings before construction or cultural heritages under recovery. Those researches used special devices or markers that are not applicable in long distanced outdoor environment. Also the server had to compute a lot of transformations for the location changes of virtual objects. This paper proposed a mobile augmented reality system that uses GPS and accelerometer sensors in order to compute the virtual object's locations without using markers. The server determines the position and orientation by comparing the GPS data obtained from the client with the predefined 3D object informations in the server. If the server sends the virtual object informations such as the position, orientation and matching information, then the client matches the virtual object on the screen of mobile camera phone. In addition, the client computes the transformations of location change detected by the accelerometer derived from the user's movement without additional connection to the server.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.319-326
• /
• 2006

All around tile world there has been great human and economical damage continuously by disasters like the earthquakes and storms(Tsunami) in eastern asia which recently occurred, and like the New Orleams hurricane in USA. The situation is our countries damage from natural disasters due to heavy snow, storms, forest fires have been increasing In this research we obtained GSIS data of the 05' Yang-yang forest fire disaster area using multi-sensors like airborne laser data, GPS/INS, aerial photograph surveying. In result we produced digital topographical maps, digital elevation models, digital external models, digital images, infrared images. By, analyzing and comparing with past aerial photography we obtained the exact damage area, amount of damage, estimated tile areas where a landslide might occur, and we analyzed vegetations amount of damage and possibility of recovery.