• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.374-377
• /
• 2015

O2O(Online-to-offline) service is the new commerce system form that mixed information search and payment of products and services from online and receipt of goods from offline. O2O commerce combine advantage of existing electronic commerce and redeem the critical point of each commerce circulation method, but earnings model is still lacking compared to development speed of O2O technology. Therefore this study drew common factor applied to O2O service to search success factor of O2O commerce on the point of view as a customer Centered by existing B2C electronic commerce, Mobile commerce, and service quality model of offline commerce included O2O commerce method. Further we suggest O2O success factor model combined new O2O success factor additionally reflecting qualitative research result based on drew O2O success service Quality factor.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.189-197
• /
• 2007

Developed safety system which transfers danger information to rear cars for accident prevention when drivers detect a accident, a dropping or a freezing during driving on the high way. To prevent an accident, each vehicles mount OBU which is made up of a GPS unit and a transmitter-receiver and the trace of road is always renewed and saved in OBU per a regular past distance. When the driver see dangerous situation, transfer a danger pattern and a trace information by pressing button. All cars which receive information compare the received data with the original data. And then, only cars which are located at the rear in a regular distance respond and occur a warning. Performed a road test at the rate of $30{\sim}50$ kilometer a hour using two test cars which saved about 120meter's space between them were mounted OBU which had 447Mhz transceiver. As a result of the experiment, communication between test cars had no problem. Accordingly, it can use a safety driving device because driver can notice a danger situation and set themselves ready for it using this system in advance.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.260-261
• /
• 2017

최근 사회구조의 복잡화, 산업구조의 다변화, 기후변화 등에 의해 자연재해 및 산업재해, 도시재난이 급증하고, 그 규모 또한 대형화하고 있다. 이로 인해 에너지, 통신, 교통, 금융 등 공공 인프라의 피해가 급증하면서 작은 재해도 큰 재난으로 변하는 예가 늘어나고 있다. 한편 현대사회에 대한 IT의 관여도가 급속도로 늘어나면서 IT 서비스의 궁극적인 형태이자, 모든 산업을 수용하는 개념의 플랫폼(Platform)이 IT를 넘어서 글로벌 사회의 절대적 지배자로 등장했다. 또한 전 세계 유저들의 관점에서 보면 개개인들이 손에 든 스마트폰이 생활의 모든 분야에 걸쳐 소통, 정보, 쇼핑, 제보, 오락 등 모든 활동의 수단으로 절대적 가치를 창출하고 있다. 이는 스마트폰이 가진 스마트 데이터 생산 및 공유 기능에서 비롯된다. 이처럼 스마트 데이터를 기반으로 한 IT플랫폼이 중요한 위치를 점하지만, 아직 재난관리 분야에서 이를 본격적으로 도입, 활용하지 못하고 있다는 점은 큰 문제이다. 국내의 사정을 보면 다행히 벤처기업들을 중심으로 이 같은 플랫폼 구축 움직임이 시작되었으며, 여기에 활용될 데이터 자원을 창출할 수 있는 솔루션 및 특허기술들 역시 속속 등장하고 있다. 시민들이 재난현장을 스마트폰으로 실시간 공유하면 이 스마트 데이터들이 이미지 및 음향정보, 위치기반(GPS)정보, 시각정보, 3D정보, 빅데이터 정보, 센서정보 등으로 분류되어 플랫폼 안에서 인공지능(AI) 딥러닝 방식에 의해 분석되고, 이를 즉시 재난당국 및 시민들에게 재난긴급문자 등 자동으로 경보로 전해주는 것이 이 플랫폼의 핵심 기능이다. 몇몇 벤처기업이 보유한 특허기술을 기반으로 공공자본이 투입되어 이러한 플랫폼이 구축될 경우 국내 재난관리 수준의 획기적 발전은 물론 전 세계를 시장으로 한 플랫폼 수출 또는 글로벌 재난정보 수집능력에서도 엄청난 힘을 발휘할 것으로 기대된다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.153-172
• /
• 2018

Overloading of Commercial vehicles have been an important area of transportation as one of the main causes of pavement damage, bridge collapse, severe traffic accident, etc. In this study, we analyzed the effects of overweight prevention by analyzing overweight driving patterns and using weight sensors. First, we analyzed relevant literatures of overweight and surveyed the commercial weight sensors. Then we chose the typical type of overweight vehicles based of overweight enforcement data analysis. MEMs inclinometer weight sensor were installed to 10 test vehicles and data was collected by weight sensors and gps in real time. As a result of gross vehicle weight and axle weight analysis, it was found weight sensor could decrease overweight rate. However, since the number of samples of test vehicles is insufficient to represent the whole commercial vehicle, further studies are deemed possible through the extension test.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.470-478
• /
• 2019

Because the global positioning system (GPS) is not available in underwater environments, an inertial navigation system (INS)/doppler velocity log (DVL) integrated navigation system is generally implemented. In general, an INS/DVL integrated system adopts a loosely coupled method. However, in this loosely coupled method, although the measurement equation for the filter design is simple, the velocity of the body frame cannot be accurately measured if even one of the DVL transducer signals is not received. In contrast, even if only one or two velocities are measured by the DVL transducers, the tightly coupled method can utilize them as measurements and suppress the error increase of the INS. In this paper, a filter was designed to regenerate the measurements of failed transducers by taking advantage of the tightly coupled method. The regenerated measurements were the normal DVL transducer measurements and the estimated velocity in RPM. In order to effectively estimate the velocity in RPM, a filter was designed considering the effects of the tide. The proposed filter does not switch all of the measurements to RPM if the DVL transducer fails, but only switches information from the failed transducer. In this case, the filter has the advantage of being able to be used as a measurement while continuously estimating the RPM error state. A Monte Carlo simulation was used to determine the performance of the proposed filters, and the scope of the analysis was shown by the standard deviation ($1{\sigma}$, 68%). Finally, the performance of the proposed filter was verified by comparison with the conventional tightly coupled method.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.119-124
• /
• 2022

The international gnss service (IGS) provides real-time service (RTS) orbit and clock correction applicable to the broadcast ephemeris of GNSS satellites. However, since the RTS correction cannot be received if the Internet connection is lost, the RTS correction should be predicted and used when a signal interruption occurs in order to perform stable precise point positioning (PPP). In this paper, PPP was performed by predicting orbit and clock correction using a long short-term memory (LSTM) algorithm in real-time during the signal loss. The prediction performance was analyzed by implementing the LSTM algorithm in RPI (raspberry pi), the processing speed of which is not high. Compared to the polynomial prediction model, LSTM showed excellent performance in long-term prediction.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.371-374
• /
• 2021

자율주행 기술이 급속도로 발전하고 있지만, 자율주행 레이싱 기술과 관련 산업은 전세계적으로 아직 걸음마 수준이다. 본 연구팀은 국내 자율주행차 대표기업인 (주)언맨드솔루션에서 지원하는 플랫폼을 사용하여 자율주행 레이싱 제어 모델 프레임워크를 설계하고 기초 실험을 진행하였다. 제안된 자율주행 레이싱 제어 모델은 GPS 신호처리부, LiDAR 신호처리부, 영상처리부, 차량제어부, 추월/회피 제어부, 컨트롤러 통신부 등으로 구성된다. 실험을 통해 각 구성요소에 대한 기본 성능을 검증하였고, 레이싱에 최적화된 인공지능(AI) 기반 추월/회피 제어 알고리즘 개발을 위한 중요한 토대를 마련하였다. 본 연구를 바탕으로 2021년 11월에 국내 최초로 개최되는 세계 AI 로보카레이스 대회에 출전하여 제안된 자율주행 레이싱 제어 모델 프레임워크의 성능을 검증할 계획이다.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.38-44
• /
• 2023

This study aims to determine how agricultural drones are operated for flight tests using a 5G communication in order to carry out a mission such as sensing agricultural crop healthy status with special cameras. Drones were installed with a multi-spectral and IR camera to capture images of crop status in separate altitudes with different speeds. A multi-spectral camera can capture crop image data using five different particular wavelengths with a built-in GPS so that captured images with synchronized time could provide better accuracy of position and altitude during the flight time. Captured thermal videos are then sent to a ground server to be analyzed via 5G communication. Thus, combining two cameras can result in better visualization of vegetation areas. The flight test verified how agricultural drones equipped with special cameras could collect image data in vegetation areas.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_1
• /
• pp.447-454
• /
• 2013

The geolocation accuracy of SAR satellite imagery is affected by orbit and sensor information and external variables such as DEM accuracy and atmospheric delay. To predict geolocation accuracy of KOMPSAT-5 and KOMPSAT-6, this paper uses TerraSAR-X imagery which has similar spec. Simulation data for sensitivity analysis are generated using range equation and doppler equation with several key error sources. As a result of simulation analysis, the effect of sensor information error is larger than orbit information error. Especially, onboard electronic delay needs to be monitored periodically because this error affects geolocation accuracy of slant range direction by 30m. Additionally, DEM accuracy causes geolocation error by 20~30m in mountainous area and atmospheric delay can occur by 5m in response to atmospheric condition and incidence angle.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.247-254
• /
• 2010

In this paper, a new approach has been studied correcting the geometric distortion of SPOT 4 imagery. Two new equations were induced by the relationship between satellite and the Earth in the space. line-of-sight (LOS) vector adjustment model for SPOT 4 imagery was implemented in this study. This model is to adjust LOS vector under the assumption that the orbital information of satellite provided by receiving station is uncertain and this uncertainty makes a constant error over the image. This model is verified using SPOT 4 satellite image with high look angle and thirty five ground points, which include 10 GCPs(Ground Control Points) and 25 check points, measured by the GPS. In total thirty five points, the geometry of satellite image calculated by given satellite information(such as satellite position, velocity, attitude and look angles, etc) from SPOT 4 satellite image was distorted with a constant error. Through out the study, it was confirmed that the LOS vector adjustment model was able to be applied to SPOT4 satellite image. Using this model, RMSEs (Root Mean Square Errors) of twenty five check points taken by increasing the number of GCPs from two to ten were less than one pixel. As a result, LOS vector adjustment model could efficiently correct the geometry of SPOT4 images with only two GCPs. This method also is expected to get good results for the different satellite images that are similar to the geometry of SPOT images.