• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.245-254
• /
• 2018

Impact of tropospheric correction techniques on accuracy of the GPS (Global Positioning System) derived ellipsoidal heights has been experimentally assessed in this paper. To this end, 247 baselines were constructed from a total of 88 CORS (Continuously Operating Reference Stations) in Korea. The GPS measurements for seven days, acquired from the so-called integrated GNSS (Global Navigation Satellite Systems) data center via internet connection, have been processed by two baseline processing software packages with an application of the empirical models, such as Hopfield, modified Hopfield and Saastamoinen, and the estimation techniques based on the DD (Double-Differenced) measurements and the PPP (Precise Point Positioning) technique; hence a total number of the baseline processed and tested was 8,645. Accuracy and precision of the estimated heights from the various correction schemes were analyzed about baseline lengths and height differences of the testing baselines. Details of these results are summarized with a view to hopefully providing an overall guideline of a suitable selection of the modeling scheme with respect to processing conditions, such as the baseline length and the height differences.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.778-778
• /
• 2012

수문조사시설 중 하나인 영점표고검정수준점은 장기간의 시간 경과에 따른 하천 수문관측 환경변화로 망실 및 침하 등으로 인한 신뢰도가 저하되고 있는 것이 현실이다. 수위표 영점표고는 일반적으로 하상부터 자유수면의 높이까지를 일컫는 수위에 대한 기준 높이가 되는 값으로 영점표고의 변동은 수위의 변동을 초래하기 때문에 관측된 수위의 시계열 연속성을 확보하기 위해서는 영점표고검정수준점의 신뢰도가 대단히 중요하다. 따라서 본 연구에서는 수문자료에 직접적인 품질에 영향을 줄 수 있는 영점표고검정수준점에 대하여 체계적이고 전문적인 공공측량을 실시하였으며, 왕복수준측량 과정에서 발생할 수 있는 오류 및 오차를 검증하기 위해 RTK-GPS 측량을 병행 실시하였다. RTK-GPS 측량을 실시하기 전 낙동강권역내의 국립지리정보원에서 관리하고 있는 통합기준점을 대상으로 삼각망 구축을 실시하였다. RTK-GPS 측량의 결과를 토대로 직접수준측량과의 비교 검토를 실시하였으며, 두 측량성과간의 차이가 0.2m 이상을 경우에는 재 측량을 실시하여 발생될 수 있는 오류를 최소화 하였다. 또한 수준측량과 RTK-GPS 측량으로 확정된 영점표고검정수준점의 표고값을 이용하여 수위표 영점표고의 적정성을 검토하고자 하는 해발수위 비교를 실시하였다. 비교방법은 비교적 수면경사가 크게 나타나지 않는 지점을 선택하여 적정성을 검토하였으며, 기존 영점표고검정수준점보다 개선되는 효과를 얻을 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.4
• /
• pp.393-403
• /
• 2011

In this study, we suggested the period of tide observations is proper to calculate the mean sea level(MSL) precisely on Incheon tide station using wavelet analysis, and newly determined then the vertical reference surface of Korea using the calculated MSL. In order to calculate the height difference between the calculated MSL and specific ground station (ICGP) near the Incheon tide stations, we performed the laser measurements directly to the sea surface where located below ICGP. The orthometric-height of ICGP was determined that corrected the height difference to the calculated MSL using linear interpolation method. Finally, we connected the orthometric-height of ICGP with the original benchmark (ORBM) using GPS leveling methods for determining the new orthometric-height of ORBM. As the results, there is a variation amount of 0.026m between the new MSL was calculated in this study and old MSL was calculated in 1910's. Also, there is a difference of 0.035m between the new and old orthometric-heights of ORBM. The connection (or leveling) error of 0.009m was revealed in new orthometric height of ORBM with consideration of MSL variation which may caused by the error of GPS ellipsoid height and/or geoid model. In this study, we could be determined precisely the orthometric-height of ORBM based on the new MSL of Incheon Bay using only GPS leveling method, not a spirit leveling method. Therefore, it is necessary to determine the vertical datum strictly using long-term and continuously tide observations more than 19 years and to use the GPS leveling method widely in the height leveling work for the effective changeover from the orthonormal to the orthometric in national height system.

• 한국공간정보시스템학회:학술대회논문집
• /
• 1999.06a
• /
• pp.217-228
• /
• 1999

최근 범국가적인 GIS구축사업을 위한 효율적인 지형공간정보취득기법에 대한 요구가 날로 증가하고 있다. 이는 HW, SW 및 데이터로 구성되는 GIS구축에서 지형자료가 차지하는 비중과 이의 취득에 필요한 노력이 매우 중요함을 반증하고 있다. 이에 부응하여 국내에서도 재래식측량기법의 자동화/현대화에서부터 GPS측량기술의 도입, Airborne-항공사진측량기법의 개발 및 고해상도위성영상의 활용방안에 이르기까지 새로운 측량기술에 대한 다양한 연구와 기술축적을 서두르고 있는 실정이다. 그러나 위의 어떠한 측량기법도 단독으로는 정확도, 신속성, 경제성, 현재성 등 GIS 자료취득의 모든 요구조건을 만족하는 Total Solution이 되지 못하고 있다. 따라서 본 연구에서는 매핑과 GIS-자료취득에 활용되고 있는 여러 가지 항공측량기술의 현황과 장단점을 살펴보았다. 또한 위성에 의한 위치결정시스템인 GPS와 관성항행장치인 INS를 결합하여 항공측량 분야에 필요한 센서의 위치와 회전각을 결정하므로서 시너지(Synergy)효과를 높이는 기법을 소개한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.283-292
• /
• 1999

Aerotriangulation for the large scale mapping(photo-scale l/5,000) was studied with the projection center determined by kinematic DGPS positioning. For the feasibility study, the accuracy and error was analyzed with the comparison between a projection center from the conventional model adjustment and the projection center determined by the kinematic DGPS positioning. Kinematic DGPS-supported Bundle adjustment was also performed. The accuracy of projection center, determined by L1 phase data observed within 30 km from base station, was stable, and the planimetric accuracy(RMS) is 13 cm and the vertical accuracy(RMS) is 15 cm with 4 ground control points, which satisfies the national standard of digital mapping. Thus, this study shows that GPS-assisted aerotriangulation can be used for economic digital mapping.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.3
• /
• pp.295-303
• /
• 2000

The purpose of this research is to enhance efficiency and tide measurement of the bathymetry survey based on the DGPS techniques which is becoming popular today due to a lot of benefits using the GPS. And according to the result of this research, choice and interpolation were possible with the most optimum method according to the various mathematical regressive equations as linear, parabolic, polynomic, reciprocal, hyperbolic, logarithmic and Gaussian functions. And the height of ground surface is easily calculated by 2D+1D transformation of coordinate of WGS84 in Cm-level based on the real time, even though the GPS time and tide were used to be synchronized through step-wised processing before. And because of the synchronization of time, the real time DGPS can cope with the loss of local current and changes of the tide.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.1
• /
• pp.27-40
• /
• 1998

This paper addresses the suitability of GPS positioning technology to monitoring deformation and movement of structures. The first part of the study is an empirical quantitative study of the repeatability of GPS observations and the second part is a performance evaluation of kinematic GPS, which requires only a few minutes per a point, for monitoring deformation of an engineering structure. On the test network for monitoring of a earth am, four observations have been conducted repeatedly on different seasons and water levels. The reference network was observed in static mode, and monitoring points were observed respectively in rapid-static mode as well as in kinematic mode in each epoch and then the results were compared with those obtained by conventional surveying techniques. The repeatability of baseline vectors to better than average 7 mm in three dimensions was achieved in base line observations between reference points and also the unclosure of reference networks showed the range of 4 ppm to 27 ppm. Compared with conventional surveying techniques, the kinematic approach showed the differences of 3∼4 m in slope distances which were observed from reference points to monitoring points, and showed the differences of 4∼8 m in height. It was ascertained that the kinematic GPS technology provides an efficient alternative to deformation monitoring by conventional means which are capable of detecting movements in the order of 5 mm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.1
• /
• pp.33-39
• /
• 1999

In order to calculate geoidal height refered to Bessel ellipsoid, methods to translate geoidal heights from a certain coordinate system to an arbitrary system with the corresponding ellipsoid are studied. and geoidal heights refered to Bessel ellipsoid were computed from EGM96 Model refered to GRS80 using iteration method pro-posed in this paper. Transformation parameters between WGS84 and Bessel were calculated using geoidal heights computed from iteration method. The result of coordinate transformation(standard deviation) were 0.009 second in latitude and 0.006 in longitude and 0.393m in orthometric height.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5215-5220
• /
• 2013

Recent construction in the field of 3D aversion is increasing interest in automation. This study is results about survey of the coastal landfill using automatic VRS-GPS surveying system. GPS is made with GRXI and SHC250 controller. Automatic surveying system is composed of DPS module, geomagnetism sensor, bluetooth, gimbals, IMU, etc and enables an automatic driving via entered into a route of position. The developed auto surveying system has installed the front and camera for vertical axis and can grasp situation of surveying with smartphone in real time. The comparative result between surveyed result with repetition method auto VRS-GPS surveying system observed surveyed result with VRS-RTK has shown that average error of x-axis is 0.009m, average error of y-axis, 0.010m and average error of height, 0.002m. This possibility was confirmed that field application.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.143-144
• /
• 2010

Nowadays, sounding is done by either manually on a boat or through the use of survey. These existing measures are considered to be very inefficient. they are not only greatly limited by environmental circumstances but also requires much of time, expenses, and manpower. Therefore, there emerges a greater need for a new sounding system which will allow us to measure the depth of water, less affected by financial and environmental restrictions, within a short period of time. This is a base study for developing an automatic sounding system, which will enhance the advantages of manned sounding and unmanned sounding, raise the effectiveness and economic efficiency, and acquire more precise data.