• Title/Summary/Keyword: GPS(RTK)

Search Result 245, Processing Time 0.021 seconds

Evaluation for RTK-GPS Accuracy Using CDMA (모뎀통신을 이용한 RTK-GPS 측량 정확도 분석)

  • Seo Doo-Chun;Lee Dong-Han;Park Su-Young;Song Jeong-Heon;Lim Hyo-Suk
    • Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
    • /
    • 2006.04a
    • /
    • pp.89-92
    • /
    • 2006
  • The main objective of this study is to evaluate the RTK-GPS by the CDMA in Daejeon. As the result of RTK-GPS by CDMA, as a consequence of comparing the resulted of fast static GPS, we were able to prove the fact that we can determine the 3 dimensional information from horizontal in error of ${\pm}0.029m$(CE90. CMAS) and from vertical in ${\pm}0.027m$(LE 90, LMAS) in WGS-84 coordinate system.

  • PDF

Evaluation of GPS and Totalstation Surveying for Facilities Mapping (시설물 현황도 작성을 위한 GPS와 토털스테이션 측량의 적용 및 성과분석)

  • 박병욱;이대근;양경주
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.21 no.4
    • /
    • pp.373-381
    • /
    • 2003
  • This study presents the detailed methods for facilities mapping using GPS and Totalstation. From the control survey by GPS network adjustment, the level of significance fur the height value of fourth order triangulation stations used in this study was estimated about 10cm. According to the result of verification for the transformation coefficients of national coordinate, which were announced by the National Geographic Information Institute, RMSE f coordinate transformation was found out as $\pm$0.546m that can be applied to a map scale less than 1/10,000. The accuracy analysis of height determination by Totalstation for the traverse points spaced average 90m showed that RMSE came out $\pm$9mm on the basis of direct leveling, so it indicated that trigonometric leveling by Totalstation was correct comparatively. The result of accuracy analysis of GPS/RTK surveying on traverse points showed that RMSE came out $\pm$33mm in horizontal location on the basis of Totalstation's outcome and $\pm$15mm in height value on the basis of direct leveling. In the construction survey, GPS/RTK surveying is quicker and more economical than Totalstation surveying in the feasible areas of GPS surveying. but there were many impossible areas for GPS/RTK surveying by the obstacles like a building.

Verification on the Application of Monitoring for Frame Structures Using the VRS-RTK Method through the Free Vibration Test (자유 진동 실험을 통한 VRS-RTK 기법을 이용한 골조 구조물의 모니터링 적용성 검토)

  • Choi, Se-Woon;Park, Hyo-Seon;Kim, Bub-Ryur;Lee, Hong-Min;Kim, You-Sok
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.18 no.1
    • /
    • pp.174-182
    • /
    • 2014
  • To monitor the wind-induced responses of buildings, conventional real-time kinematic (RTK) methods based on two global positioning system (GPS) receivers (e.g., a reference and a rover) are widely applied. However, these methods can encounter problems such as difficulty in securing and maintaining a space for a reference station. With the recently developed virtual reference station (VRS)-RTK approach, the position of a structure can be measured using only a rover receiver. In this study, to evaluate the applicability of VRS-RTK methods in monitoring the lateral structural responses of frame structures, we performed free vibration tests on a one-story frame model (the first natural frequency of 1 Hz) and a three-story frame model (the first natural frequency of 0.85 Hz). To assess the reliability of the displacement and acceleration responses measured by the GPS, we performed a concurrent measurement using laser displacement sensors and an accelerometer. The accelerometer results were consistent with the GPS measurements in terms of the time history and frequency content. Furthermore, to derive an appropriate sampling rate for the continuous monitoring of buildings, the errors in the displacement responses were evaluated at different GPS sampling rates (5, 10, 20 Hz). The results indicate that as the sampling rate increased, the errors in the displacement responses decreased. In addition, in the three-story model, all modal components (first, second, and third modes) could be recorded at a sampling rate of 20 Hz.

Evaluation of GPS and Totalstation Surveying for University Facilities Mapping (GPS 및 토탈스테이션을 이용한 대학시설물 현황측량의 성과분석)

  • 박병욱;이대근;서상일
    • Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
    • /
    • 2003.10a
    • /
    • pp.43-48
    • /
    • 2003
  • This study presents the detailed methods for university facilities mapping using GPS and totalstation. In the control survey by GPS network adjustment, the level of significance for the height value of fourth order triangulation stations was estimated about loom. The accuracy analysis of height determination by totalstation for the traverse points showed that the RMSE came out 9mm to the basis of direct leveling, so it indicated that trigonometric leveling by totalstation was correct comparatively. For GPS/RTK method, the result of accuracy analysis about traverse points showed that the RMSE came out 33㎜ in horizontal location to the basis of totalstation's outcome and 15㎜ in height value to the basis of direct leveling. In the construction survey, GPS/RTK surveying is quicker and more economical than totalstation surveying in the feasible areas of GPS surveying, but there were many impossible areas lot GPS/RTK surveying by the obstacles like a building.

  • PDF

The Analysis of Road Alignement and Construction GSIS Using RTK GPS and TS (RTK-GPS와 TS를 이용한 도로선형분석 및 GSIS 구축)

  • 장상규;홍순헌;김가야
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.21 no.4
    • /
    • pp.293-299
    • /
    • 2003
  • In the future, the design of road should be convenient in using of high-technology information and it needs the design of alignment that is able to make the maximum vehicles inducement function appropriated for CNS(Car Navigation System). So it needs to analysis appropriately the alignment of road for the improvement design of road which is established and to make the design of road and the coordinate of the main points. Therefore, this research had acquired the road data by RTK-GPS to accurate the analysis of road alignment and compared with Total Station. As the result, we could acquire the design source of the road alignment using RTK-GPS. Also, it was estimated the accuracy after comparing the design with RTK-GPS coordinates. We made an analysis of the degree of slant or the ups and downs of surface. We made an analysis of three dimensional visual information which was included in GSIS concept and estimated the accuracy. Finally, we analyzed the earth volume calculation by comparing with Total Station.

Accuracy Evaluation of Internet RTK GPS by Satellite Signal Reception Environment (위성 수신환경 변화에 따른 인터넷 RTK GPS 측량의 정확도 평가)

  • Kim, Min Gyu;Park, Joon Kyu
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.31 no.4
    • /
    • pp.277-283
    • /
    • 2013
  • GPS RTK surveying has an issue that the positioning error increases as the base line distance between the reference station and rover station increases. However, nowadays, an accuracy assessment that can handle such issue is surely required because of the modernization of GLONASS, Galileo project, and other improvements of satellite receiving conditions. Therefore, in this research, we compared and analyzed data sets collected with the CORS network, placed at NGII and NDGPS, using Internet RTK surveying in different satellite receiving conditions. As a result, there was a negative effect on the positioning accuracy as the base line distance increases. Furthermore, we could collect quantitative data of the accuracy of RTK surveying. When national-wide GNSS system is fully established, this result will contribute the growth of various GNSS industries including survey industries and land survey industries.

Deisgn and Implementation of RTK-GPS Error Correction Signal Transmission System for Long-Distance using the TCP/IP (TCP/IP를 이용한 RTK-GPS 보정 신호 장거리 전송 시스템의 설계 및 구현)

  • Jo, Ik-Seong;Im, Jae-Hong
    • The KIPS Transactions:PartD
    • /
    • v.9D no.1
    • /
    • pp.127-134
    • /
    • 2002
  • GPS is one of today's most widely used surveying techniques. But, users can't acquire an enough accuracy in applications of the navigation or geodesy by the GPS positioning technique because of the effects of the ionosphere and troposphere and US DoD's systematic errors. The solution of these restrictions is the DGPS technique that is to eliminate the common errors and can achieve a high accuracy. Although of sufficient density for good DGPS, accuracy of positioning is just not dense enough to provide complete coverage for real-time positioning, because distances between base and rover is short. In this paper, we designed and implemened a RTK-GPS error correction signal transmission system for long-distance using the TCP/IP, which consist of TCP, UDP and IP, which allows a user to increase the distance at which the rover receiver is located from the base, due to radio modem.

An Analysis of Application for Road Horizontal Alignment by the Combined RTK GPS/GLONASS (RTK GPS/GLONASS 조합에 의한 도로의 평면선형 적용 분석)

  • 이종출;서동주;노태호;장호식
    • Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
    • /
    • 2002.04a
    • /
    • pp.93-102
    • /
    • 2002
  • 도로상에서 발생되는 교통사고의 많은 부분이 도로의 선형불량에 기인된다. 이러한 도로의 개량설계를 위하여서는 도로의 선형을 정확히 분석할 필요가 있으며, 도로의 설계도와 주요점의 좌표가 필요하게 된다. 따라서, 본 연구에서는 현재 많이 연구되고 있는 인공위성중 RTK GPS/GLONASS의 조합에 의하여 획득된 3차원 자료를 기존 설계도의 제원을 근거로 하여 위치정밀도를 비교하며, 이렇게 재현된 도로의 선형을 평가함으로써 인공위성을 이용한 도로의 선형정보체계를 보다 효율적이고 실용적으로 사용하기 위한 한 접근방법을 제시하고자 한다.

  • PDF

Development of GPS-RTK Algorithm for Improving Geodetic Performance in Short Baseline (단기선 측지 성능 향상을 위한 GPS-RTK 알고리즘 개발)

  • Choi, Byung-Kyu;Lee, Sang-Jeong;Park, Jong-Uk;Baek, Jeong-Ho
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.27 no.4
    • /
    • pp.461-467
    • /
    • 2009
  • Relative positioning technique by GPS that can obtain the high positioning accuracy has been used for generation of high precision positioning with elimination or the reduction of the common errors. This paper gives some algorithms for RTK and considers the filter to estimate the positioning information and integer ambiguities at each epoch in the whole algorithms. The extended kalman filter has been employed to estimate the state parameters and the modified LAMBDA to resolve the integer ambiguities. The data processing was performed by GPS single frequency and dual frequency in short baseline. The verification procedure of these positioning compared with results from Bernese 5.0 software. We presented some statistic values on positioning errors and the rates of integer ambiguity resolution.

Development of Bridge Warning System by Using GPS Surveying Method (GPS측량기법을 이용한 교량경보시스템 개발)

  • 서동주;노태호;이종출
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.20 no.4
    • /
    • pp.415-421
    • /
    • 2002
  • A recently lot of facilities have been constructed from rapidly development of science and economic growth. Among them, bridges are tending to be large because of geometrical problems of the road. And then the method of satellite surveying is being practical use variously out of present surveying methods. Therefore in this study it takes a measurement of bridge displacement using the RTK GPS Mode instead of the using mechanical measurement system. The observation value was verified by using Total Station to inspect observation value of RTK GPS. And then, by using the Delphi of object intending language, developed bridge warning system and applied it. The result of this study was found verification error of 0.2~8.3mm, therefore the measurement of bridge displacement of grand bridge can be applied by using An GPS.