• 한국시뮬레이션학회논문지
• /
• 제21권2호
• /
• pp.91-101
• /
• 2012

자동차 생산라인은 차체라인, 도장라인, 의장라인으로 구성된다. 이러한 생산라인들은 직렬로 배치되어 흐름생산을 거치기 때문에 전후 공정의 상태에 따라 라인에서는 starvation(물량 부족으로 인한 생산 불가능) 또는 blocking(용량 초과로 인한 생산 불가능)으로 인한 정지가 발생한다. 이에 starvation이나 blocking으로 오는 생산 손실을 막기 위해 WBS, PBS와 같은 창고를 개별적으로 보유하여 운영된다. 본 논문은 라인의 버퍼역할을 하는 각 창고들을 통합하여 운영할 수 있는 통합창고 시뮬레이션 모형을 제안한다. 적정 Stacker Crane 대수와 AGV 대수를 구하고, 이를 운영할 수 있는 운영방법론을 제안한다. 또한 개별창고와 통합창고 모형을 시뮬레이션을 이용하여 효율성 비교를 한다.

• 한국실내디자인학회논문집
• /
• 제20권5호
• /
• pp.178-187
• /
• 2011

This research suggested the hygienic spatial composition of sell-service restaurants applying HACCP(Hazard Analysis and Critical Control Point System). The circulation of the food, dishes, waste, workers and customers were each fractionated and arranged according to the hygienic sequence of cooking food in kitchen and process for eating food within the customer space. The spaces were separated by the degree of cleanness(clean area, semi-clean area, contaminated area). After that, hygiene facilities to remove contamination and pass facilities intended to control moving were added at the possible points of cross-contamination in oder to prevent the cross-contamination. For hygienic spatial composition of self-service restaurant, the following should be acknowledged: In the kitchen, spaces in which the food is handled after being heated should be located in the clean area. As of the customer space, spaces where dishes are prepared, food and water is received, and the table hall should be located in the clean area. Food circulation should flow from the contaminated area to the clean area. Food, dishes, waste should be moved through pass facilities so that workers do not have to come and go between other areas of cleanness. Also lockers for private clothes and lockers for uniforms should be separated. Hygiene facilities should be easily accessible so that workers can use them whenever they enter their working area. The contaminated area where dirty dishes are dealed with should be separated from the clean area. Waste should be thrown out without crossing cooking areas. As of customer circulation, the hygiene facility for hand washing should be located near the space where dishes for self-service are placed. The customer circulation should lead customers to leave restaurants after giving back the dirty dishes in the contaminated area.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권5호
• /
• pp.2345-2351
• /
• 2014

Lysyl oxidase-like 2 (LOXL2), a member of the lysyl oxidase (LOX) family, is a copper-dependent enzyme that catalyzes oxidative deamination of lysine residues on protein substrates. LOXL2 was found to be overexpressed in esophageal squamous cell carcinoma (ESCC) in our previous research. We later identified a LOXL2 splicing variant LOXL2-delta72 and we overexpressed LOXL2-delta72 and its wild type counterpart in ESCC cells following microarray analyses. First, the differentially expressed genes (DEGs) of LOXL2 and LOXL2-delta72 compared to empty plasmid were applied to generate protein-protein interaction (PPI) sub-networks. Comparison of these two sub-networks showed hundreds of different proteins. To reveal the potential specific roles of LOXL2- delta72 compared to its wild type, the DEGs of LOXL2-delta72 vs LOXL2 were also applied to construct a PPI sub-network which was annotated by Gene Ontology. The functional annotation map indicated the third PPI sub-network involved hundreds of GO terms, such as "cell cycle arrest", "G1/S transition of mitotic cell cycle", "interphase", "cell-matrix adhesion" and "cell-substrate adhesion", as well as significant "immunity" related terms, such as "innate immune response", "regulation of defense response" and "Toll signaling pathway". These results provide important clues for experimental identification of the specific biological roles and molecular mechanisms of LOXL2-delta72. This study also provided a work flow to test the different roles of a splicing variant with high-throughput data.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.118-123
• /
• 2017

It is well known that water jetting is now widely used in the advanced cutting processes of polymers, metals, glass, ceramics, and composite materials because of some advantages, such as heatless and non-contacting cutting different from the laser beam machining. In this paper, we proposed the simulation model of waterjet by lengths and the inner spiral structure of the nozzle. The simulation results show that the outlet velocity of the nozzle is faster than the inlet. Furthermore, we found rapid velocity reduction after passing through the outlet. The nozzle of diameter ${\phi}500$ and length 70mm, shows the optimal fluid width and velocity distribution. Also, the nozzle with inner spiral structure shows a Gaussian distribution of velocity and this model is almost twice as fast as the model without spiral structure, within the effective standoff distance (2.5 mm). In the future, when inserting abrasive material into the waterjet, we plan to analyze the fluid flow and the particle behavior through a simulation model.

• 한국대기환경학회지
• /
• 제28권1호
• /
• pp.94-104
• /
• 2012

The purpose of this research is to quantify the compliance of on-road emission from a light duty diesel vehicle, based on a comparison to emission regulation standard. $NO_x$, CO and THC emissions were measured using a portable device on a selected real-world driving route with a length of approximately 22 km. On-road measurements were repeated by 10 times on a same route to reflect variability in traffic conditions. A test route was divided into 22 road links with length of 1 km to analyze emission results with higher spatial resolution. The average emissions of $NO_x$, CO and THC over total travel distance, which is approximately 220 km, were quantified to be in compliance with emission regulation standards. Under higher spatial resolution, $NO_x$ concentration exceeded a standard in 92 links out of 220 links. The extended time in stop period and the stop-and-go driving cycle were identified as two important reasons for increased $NO_x$ emissions in observed cases. Heavy traffics showed higher $NO_x$ emissions than free flow. These results indicate that the real-world vehicle emissions might exceed the compliance level associate with traffic conditions. Another interesting observation of this research is that the on-road emission characteristics can be independent to the average speed of road links with higher spatial resolution. Variability in on-road emission might not be fully described by solely relying on an average speed, because variability in traffic conditions and road conditions can influence on real-world vehicle emissions.

• 한국멀티미디어학회논문지
• /
• 제16권9호
• /
• pp.1119-1133
• /
• 2013

These days there is a flow of support for returning to design and handcraft, and the arts and crafts ideas of William Morris have an influence until the present over periods. The semanticity and methodology of guild production method supported by William Morris is studied. The foundation that human is in beautiful harmony with nature is on free labor and artistic life. In the organic relationship, the decline of art is understood as general crisis of culture, and human living condition should be changed in order to rouse the human sense of beauty and comprehension of art. Once human labor becomes artistic, the consumption living and local living become artistic as well. And then consumers desire more artistic works, structures, or urban spaces, and the demands for those move artificers to go toward producing more artistic works and structures. That is, the course of succession of art and culture through living is the driving force of social progress. Even if the period when Morris lived and the present are very different, this paper will shows that a large amount of art and culture will be greatly developed in twenty-first century which is 'the period led by cultural consumers', and the people directly creating art works will be also increased at the same time, as Alvin Toffler suggested. Furthermore, we can aware through this paper that such the people will rule the world. Finally it reached the period that we must face to 'making artistic life' as Morris expected a century ago. According to the result of this paper, we realized the study about Morris will contribute greatly to improve the quality of human life.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.837-840
• /
• 2003

최근 인터넷의 발전으로 디지털 오디오 및 비디오와 같은 멀티미디어 스트리밍에 대한 요구가 증가하고 있다. 이러한 멀티미디어 스트리밍을 위해 UDP로 전송할 경우 TCP와 같은 혼잡제어를 수행하지 않기 때문에 동일한 경로에 TCP 트래픽 궁핍을 일으켜 혼잡붕괴를 초래한다. 이러한 역효과를 피하기 위해 멀티미디어 스트리밍을 위한 새로운 전송 프로토콜에 대한 연구가 수행되고 있다. TCP 친화적 혼잡제어기법은 크게 일반적인 혼잡윈도우 관리기능을 이용하는 윈도우기반 혼잡제어(window-based congestion control)와 TCP 모델링 방정식 등을 이용하여 전송율을 직접 조절하는 율기반 혼잡제어(rate-based congestion control)로 나눌 수 있다. 본 논문은 윈도우기반과 율기반을 복합적으로 다룬 하이브리드 TCP-friendly 혼잡제어기법에서 전송을 개선을 위한 알고리즘을 제안하였다.

• 상하수도학회지
• /
• 제30권3호
• /
• pp.271-278
• /
• 2016

Recently, reverse osmosis (RO) is the most common process for seawater desalination. A common problem in both RO and thermal processes is the high energy requirements for seawater desalination. The one energy saving method when utilizing the osmotic power is utilizing pressure retarded osmosis (PRO) process. The PRO process can be used to operate hydro turbines for electrical power production or can be used directly to supplement the energy required for RO desalination system. This study was carried out to evaluate the performance of both single-stage PRO process and two-stage PRO process using RO concentrate for a draw solution and RO permeate for a feed solution. The major results, were found that increase of the draw and feed solution flowrate lead to increase of the production of power density and water permeate. Also, comparison between CDCF and CDDF configuration showed that the CDDF was better than CDCF for stable operation of PRO process. In addition, power density of two-stage PRO was lower than the one of single-stage. However, net power of two-stage PRO was higher than the one of single-stage PRO.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.277-277
• /
• 2011

디스플레이의 기술발전에 의해 대면적 고해상도의 LCD가 제작되어 왔다. 이에 따라 LCD 점등검사를 위한 Probe Unit의 기술 또한 급속도로 발전하고 있다. 고해상도에 따라 TFT LCD pad가 미세피치화 되어가고 있으며, panel의 검사를 위한 Probe 또한 30 um 이하의 초미세피치를 요구하고 있다. 따라서, 초미세 pitch의 LCD panel의 점등검사를 위한 Probe Unit의 개발이 시급하가. 본 연구에서는 30 um 이하의 미세피치의 Probe block을 위한 Slit wafer의 식각 공정 조건을 연구하였다. Si 공정에서 식각율과 식각깊이에 따른 profile angle의 목표를 설정하고, 식각조건에 따라 이 두 값의 변화를 관측하였다. 식각실험으로 Si DRIE 장비를 이용하여, chamber 압력, cycle time, gas flow, Oxygen의 조건에 따라 각각의 단면 및 표면을 SEM 관측을 통해 최적의 식각 조건을 찾고자 하였다. 식각율은 5um/min 이상, profile angle은 $90{\pm}1^{\circ}$의 값을 목표로 하였다. 이 때 최적의 식각조건은 Etching : SF6 400 sccm, 10.4 sec, passivation : C4F8 400 sccm, 4 sec의 조건이었으며, 식각공정의 Coil power는 2,600 W이었다. 이러한 조건의 공정으로 6 inch Si wafer에 공정한 결과 균일한 식각율 및 profile angle 값을 보였으며, oxygen gas를 미량 유입함으로써 식각율이 균일해짐을 알 수 있었다. 결론적으로 최적의 Slit wafer 식각 조건을 확립함으로써 Probe Unit을 위한 Pin 삽입공정 또한 수율 향상이 기대된다.

• 디지털융복합연구
• /
• 제9권5호
• /
• pp.65-75
• /
• 2011

최근의 정보통신기술은 관련기술과의 융합으로 모든 시스템을 통합하는 형태로 발전하고 있다. 이런 시대의 흐름과 마찬가지로 의료산업은 근래에 많은 발전 및 응용에 관한 연구가 활발히 진행되고 있다. 의료정보시스템도 의료IT의 정보시스템들이 통합되는 방향으로 급변하게 진화해가고 있으며, 앞으로도 그 가속도는 더 할 전망이다. 따라서 본 논문에서는 국가 주도의 유비쿼터스 환경의 구축을 위한 병원 응용시스템 구축과 IT응용 서비스가 실용화하고 있는 실정에서 통합의료 정보를 위한 환자 진료의 서비스 강화를 도모하도록 통합의료정보시스템을 제안 및 설계하는 것과 동시에 통합의료정보시스템의 구축방안과 운영과제를 제시하였다.