• The Korean Journal of Pain
• /
• v.14 no.2
• /
• pp.271-275
• /
• 2001

Buerger's disease is a nonatherosclerotic occlusive inflammatory disease of the small and medium arteries, and veins of the distal leg or arm. Percutaneous lumbar sympathectomy is used to lower extremity occlusive vascular disease as well as Buerger's disease. Lumbar sympathectomy improves blood flow and provides pain relief in the lower extremity. We report two cases of lumbar sympathectomy using radiofrequency thermocoagulation in patients with Buerger's disease. After no paresthesia and muscle contracture at 50 Hz, 1 volt and 2 Hz, 3 volts, respectively, radiofrequency lesioning was performed for 90 sec at $80^{\circ}C$. After the procedure, both patients showed skin temperature increases greater than $2^{\circ}C$ on the affected extremity. Both patients received relief from pain and symptoms without complications. We consider that lumbar sympathectomy using radiofrequency thermocoagulation is a safe and effective procedure that can relieve pain in patients with Buerger's disease.

• The Journal of Internal Korean Medicine
• /
• v.16 no.2
• /
• pp.61-73
• /
• 1995

In this study, the effects of Boshimdan, which is used in oriental medicine for the treatment of palpitation, chest discomfort, impatience, insomnia, forgetfulness ete., were tested as a part of series of experimental verification of prescriptions treatments for preventing and curing ischemic heart. The results were as follows: 1. Boshimdan did not effectively work on heart rate of the perfused rat heart. 2. Boshimdan did not effectively work on heart pressure of the perfused rat heart. 3. Boshimdan did not effectively work on flow rate of the perfused rat heart. 4. Boshimdan was not effective in activation of GOT. 5. Boshimdan was not effective in activation of GPT. 6. Boshimdan was not effective in activation of LDH. 7. Boshimdan was not effective in activation of CPK.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.26-35
• /
• 1995

Bo-Back-N ARQ is widely used in packet networks for error and flow control methanisms. This paper analyzes the network throughput under the go-back-N schem. Contrast to other analytic methods which assume independent frame losses or the first order Markov frame analytic methods which assume independent frame losses or the first order Markov frame losses concoptually, the proposed method takes into account the correlation between successive frame losses in a congested node. Computer simulation shows that our method generates more accurate performance results that independent assumption method. We apply the proposed method to analyze the performance of BWM in high speed networs. Our results show that BWM maintains the independence between traffic streams.

• Nuclear Engineering and Technology
• /
• v.41 no.3
• /
• pp.237-246
• /
• 2009

Digitalization of not only non-safety but also safety-grade I &C systems with full computerized Main Control Room (MCR) is the recent trend of I&C systems of nuclear power plants (NPP) around the world, while plant maintenance has been shifting from traditional time based maintenance to condition based maintenance. In order to cope with the new trend of operation and maintenance in NPP, a concept of online distributed diagnostic system for both plant operation and maintenance has been proposed in order to further improve both the plant efficiency and the work environment of plant operation staff members by organizational learning. In this respect, the research subjects of human machine interface (HMI) for the online distributed diagnostic system are also discussed for supporting the plant personnel at both MCR and local working places in the plant by the application of advanced ICT (Information and Communication Technologies).

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.4
• /
• pp.73-84
• /
• 1990

A burr has been defined as an undesirable projection of material formed as the result of plastic flow from a cutting or shearing operation. It is Unavoidable in all kinds of machining operation. This paper describe the burr formation mechanism which is based on the behavior of workpiece material during orthogonal machining of the clay on the milling machine. Specially in this report the rollover burr is dealt as a specific case of the chip formation in the final stage of cutting. The negative shear angle is introduced as an important features of burr formation. It is found that the burr formation process is divided into three stage-initiation, development of negative shearing, and formation of the burr with appropriate assumptions. Using above the burr formation mechanism, the size of burr can be estimated by cutting conditions.

• Asia-Pacific Journal of Business
• /
• v.4 no.2
• /
• pp.11-20
• /
• 2013

This study extends the extant scope of understanding investment decision, beyond the dominant 'technical' emphasis on the application of discounted cash flow techniques. The research methodology draws the positivist and interpretive research paradigms. It uses a deductive approach, survey strategy and principal component analysis for the analysis. Three key sets of factors emerged as important in the investment decision process in the hydropower sector. They are: group consensus (framing), influences on own judgment (heuristics), and application of knowledge & experience (intuition). The use of purposive and convenient sampling might have some unintended impact on the findings. Consequently, any generalizations of the findings to a wider population of organizations and managers need to be made with care. It is hoped that this paper will encourage other researchers to go beyond the analytic techniques of investment appraisal that have dominated investment decision research and seek to balance the emphasis by focusing on human involvement and behavioral aspects of investment decision.

• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.157-163
• /
• 2002

Using the CFD method, we investigated the combustion characteristics of grate-rotary kiln incinerator through the residence time, path line of flow and distributions of temperature and CO mass fraction according to the shape of mixing chamber and the existence and nonexistence of baffle at the exit of bypass duct. The results show that the now mixing and residence time could be variable according to the shape of mixing chamber and baffle, and we could know the temperature in the mixing chamber could increase too high if the combustion process on the grate retarded.

• Tribology and Lubricants
• /
• v.25 no.3
• /
• pp.182-186
• /
• 2009

Extruders can be basically divided into bisk and screw type of extruders. Though plastic extruders are often used for its simplicity for water and oil transportation pumps, these days screw extruders are mostly used. Screws are used in many extrusion processes to manufacture complex and complicated shaped parts made of plastics, medicine materials, food, polymer composites, iron and ceramic powders, etc. Also, material correction of deformities is caused by flow and physicochemical reaction phenomenonand material extrusion is processed according to heat transfer. various material comes to hopper because extruder has function by blender and mixing of materials can go well before come out through dice. These change process is so complicated that process condition is decided by trial and error that process condition is underground mainly at extrusion molding process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.414-417
• /
• 2005

Many process parameters have an effect on the auto-body panel forming process. A well-designed blank shape causes the material to flow smoothly, reduces the punch and yields a product with uniform thickness distribution. Therefore, the determination of an initial blank shape plays the important role of saving time and cost in the auto-body panel forming process. For these reasons, some approaches to estimate the initial blank shape have been implemented in this paper, the one-step approach by using a finite element inverse method will be introduced to predict the initial blank shape the developed program is applied to auto-body panel forming.

• Journal of the Korean Society of Visualization
• /
• v.9 no.2
• /
• pp.16-20
• /
• 2011

This paper presents a fabrication method of microcapsules encapsulating fluorescent nanoparticles sensitive to an organic liquid, which is potentially applicable to the encapsulation of protein, cell and drug. It uses the supra-molecular self-assembly of a block copolymer at the interface of the stable and controllable droplets of water suspended with fluorescent nanoparticles and the polymer solved organic. The size and uniformity of the microcapsules were examined for the various polymer concentrations by using SEM image analysis. The maximum standard deviation of the produced microcapsules of less than 3.5% was obtained from the microcapsules produced from the same conditions. The inclusion of fluorescent nanoparticles was visualized in the fluorescence microscope and by using TEM image. It is shown that this fabrication method can provide the uniform size microcapsules with a higher inclusion.