• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제1권3호
• /
• pp.193-204
• /
• 2012

본 논문에서는 PMIPv6를 기반으로 하는 LC-$GM^2$라는 저비용의 글로벌 이동성관리 아키텍처와 프로토콜 절차를 제안한다. LC-$GM^2$의 구성은 여러PMIPv6 의 로컬 도메인과 계층적 구조로 코어 네트워크로 연결되어 있다. LC-$GM^2$에서 이동성 관리는 도메인 내에서의 모바일 노드(MN)의 이동은 PMIPv6의 이동성관리 방법으로 수행되며 도메인간으로 이동할 때는 홈 네트워크 모바일 액세스 게이트웨이(MAG)가 이동 네트워크의 지역 모바일 앵커(LMA)에 직접 프록시 바인딩 업데이트(PBU)를 수행하여 코어 네트워크(CN)의 게이트웨이를 통한 패킷 전송을 수행하는 네트워크 엔티티 관점으로 수행된다. 분석 모델로 유체 흐름 이동성 모델을 기반으로 위치 업데이트 비용, 패킷 전달 및 총 비용 함수의 다양한 시스템 매개변수의 영향 이용하여 계층적 모바일 IPv6(HMIPv6) 이동성관리 프로토콜과 GPMIP 아키텍처와 비교 분석한다. 수학적 분석의 결과는 다른 글로벌 이동성관리 기법들 간의 비용 분석의 결과를 통하여 제안된 글로벌 이동성관리 기법(LC-$GM^2$)이 전체적인 비용측면에서 상당히 우수하다는 것을 보여준다.

• 대한조선학회논문집
• /
• 제54권3호
• /
• pp.227-241
• /
• 2017

In this study, a Volterra system for the variations of metacentric height (GM) in waves is employed to simulate the parametric roll phenomena of ships in head sea condition. Using the present Volterra system, the transfer function of each harmonic component in the GM variation is computed for different ship models, including mathematical models and a real containership, and the results are validated through the comparison with the values obtained using the direct calculations based on a weakly nonlinear time-domain method. Then, a semi-analytic approach employing a 1-degree of freedom equation for roll motion is developed to simulate the parametric roll motions in irregular waves. In the derived approach, the nonlinear and time-varying restoring forces in the waves are approximated using the Volterra system. Through simulations of the parametric roll for different sea states, the effects of the 1st and 2nd-order harmonic components of the variations in the occurrence and amplitude of the parametric roll motions are investigated. Because of the strong nonlinearities in the phenomena, a stochastic analysis is conducted to examine the statistical properties of the roll motions in consideration of the sensitivities and uncertainties in the computations.

• 한국융합학회논문지
• /
• 제8권5호
• /
• pp.1-11
• /
• 2017

$H_{\infty}$ 제어와 뮤-합성 제어 방법을 사용하여 두 가지 상황, 즉 불확실성이 포함되지 않았을 때와 20% 불확실성이 포함되었을 때, 하에서 스프링-매스-댐퍼 시스템의 진동을 최소화하였다. 두 컨트롤러의 안정성 및 성능 파악을 위해 GM와 PM 값을 사용하여 분석되었다. 중앙 수치 미분법과 RMS 방법을 사용하여 출력 응답의 신호 강도가 비교되었다. 끝으로, 안정성 비교를 위하여 3가지 다른 $W_{per\;f1}$ 가중함수의 경우에 대해 총 40개의 $H_{\infty}$ 제어기와 뮤-합성 제어기 무작위 표본이 생성되었다. 전반적으로, 40개 플랜트 모델에서 얻어진 결과 값의 견고한 안정성과 성능 값에 따르면, 뮤-합성 제어기가 $H_{\infty}$ 제어기보다 진동 관리에 효과적임이 입증되었다.

• 한국소음진동공학회논문집
• /
• 제15권6호
• /
• pp.680-686
• /
• 2005

This paper introduces the robust design of an intake system using transmission loss and the frequency weighting function. First, transmission loss is measured to evaluate the performance of the noise reduction for the intake system. The robust design parameters of the intake system are extracted by adapting a cost function with the Taguchi method. Subsequently, the frequency weighting function is developed by the subjective evaluation in which 6 special engineers were participated. Finally, the comparison between the proposed frequency weighted optimal design and unweighted optimal design for the transmission loss as the part is performed. Here, the overall levels of the transmission loss according to the methods are presented to validate the effectiveness of the proposed methodology.

• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.939-944
• /
• 2005

In this paper, a sound quality index for the evaluation of the vehicle intake noise was developed through a correlation analysis of the objective measurement and the subjective evaluation. First, intake orifice noise was measured at the wide-open throttle sweep condition. And then, the acoustic transfer function between intake orifice noise and interior noise was measured. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 special engineers. The correlation analysis between the psychoacoustic parameters derived from the measurement and the subjective evaluation was performed. The most critical factor was determined and the corresponding sound quality index for intake noise was obtained from the multiple factor regression analysis method. Finally, the effectiveness of the proposed index was validated.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.884-890
• /
• 2004

In this paper, an index for the evaluation of vehicle intake booming noise is developed through a correlation analysis of objective measurement data and subjective evaluation data. First, intake orifice noise is measured at the wide-open test condition. And then, acoustic transfer function between intake orifice noise and interior noise at the steady state condition is estimated. Simultaneously, subjective evaluation was carried out with a ten-scale score by 8 engineers. Next, the correlation analysis between the psycho-acoustic parameters derived from the measured data and the subjective evaluation is performed. The most critical factor was determined and the corresponding index for the intake booming noise is obtained from the multiple factor regression method. At last, the effectiveness of the proposed index is validated.