• Journal of the Korean Geographical Society
• /
• v.30 no.3
• /
• pp.311-323
• /
• 1995

This study attempts to examine the location and district of elementary schools at Chongro-gu. For the convenience of the analysis, the data are analysed with the methods of GIS network model. For the purpose data was collected from Statistical Yearbook of Education in 1994 and Census of Housing and Population in 1990. Results may be summarized as follows. First of all, spatial pattern of elementary school at Chongro-gu shows outward diffusion because of problems, rising of land value, and out-migration of population in the area. Secondly, for the analysis of locational situation this paper uses the data such as population of 5-9 age, the number of housing, accessibility, and land value. The location of elementary school is ciassified into 4 types; the best area, better area, worse area, the worst area. The best area is Pyongchana-dong, Buam-dong, and Ewha-dong and the worst area is Chongro 1ga-dona, Chonaro 2ga-dong and Sechongno-dong. Thirdly, the alternative plans of school district are presented for the maximum equity and efficience, and security of school attendantes. The former emphasizes the minimization of commuting distance, the later emphasizes the minimization of the an comfortable facilities such as main streets in school district. Present school district which is based upon administrative dong should be changed to roadbased school district.

• Geomechanics and Engineering
• /
• v.7 no.6
• /
• pp.589-612
• /
• 2014

This study includes determination of liquefaction potential in Erzincan city center. Erzincan Province is situated within first-degree earthquake zone on earthquake map of Turkey. In this context, the earthquake scenarios were produced using the empirical expressions. Liquefaction potential for different earthquake magnitudes (6.0, 6.5, 7.0) were determined. Liquefaction potential was investigated using Standard Penetration Test (SPT). Liquefaction potential analyses are determined in two steps: geotechnical investigations and calculations. In the first steps, boreholes were drilled to obtain disturbed and undisturbed soil samples and SPT values were obtained. Laboratory tests were made to identify geotechnical properties of soil samples. In the second step, liquefaction potential analyses were examined using two methods, namely Seed and Idriss (1971), Iwasaki et al. (1981). The liquefaction potential broadly classified into three categories, namely non-liquefiable, marginally liquefiable and liquefiable regions. Additionally, the liquefaction potential index classified into four categories, namely non-liquefiable, low, high and very high liquefiable regions. In order to liquefaction analysis complete within a short time, MATLAB program were prepared. Following the analyses, liquefaction potential index is investigated by Iwasaki et al. (1982) methods. At the final stage of this study, liquefaction potential maps and liquefaction potential index maps of the all study area by using IDW (inverse distance weighted) interpolation method in Geostatistical Analyst Module of ArcGIS 10.0 Software were prepared for different earthquake magnitudes and different depths. The results of soil liquefaction potential were evaluated in ArcGIS to map the distributions of drillings with liquefaction potential. The maps showed that there is a spatial variability in the results obtained which made it difficult to clearly separate between regional areas of high or low potential to liquefy. However, this study indicates that the presence of ground water and sandy-silty soils increases the liquefaction potential with the seismic features of the region.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.81-82
• /
• 2010

Emerging global economic growth and increasing demand for energy supply and demand imbalance and the excessive use of fossil fuels existing the rapidly increasing greenhouse gas emissions and resource depletion of global energy crisis is deepening. Accordingly, improvement of living conditions around and through the natural ecological preservation and the need for a comfortable life for the meeting the importance of energy management and consumption are emerging. Many in the field of architecture for energy-saving measures, and conducting research and verify green building energy ratings and low energy for the initial steps that can be verified from the Energy Performance of BIM(Building Information Model) technology development and commercialization of the building energy to predict the performance objectively, leverages technology in an existing building energy performance analysis and possibilities of BIM-based green building process presented. In this study, using BIM for existing building energy performance analysis of data collected through the objective and efficient management of the energy it consumes Mapping and Management Plan is to research on.

• Economic and Environmental Geology
• /
• v.35 no.2
• /
• pp.163-170
• /
• 2002

The purpose of this study is to analyze the relationship between geology and geothermal gradient in South Korea using GIS. For the analysis, 352 temperature logging wells were constructed to spatial database and the relationships beween geothermal gradient and geological time and lithology were analyzed using the overlay the wells layer and 1:1,000,000 scale geological map layer. The average of the geothermal aradient of South Korea is 29.34$^{\circ}C$/km. In the geologic sequence, Cenozoic strata has 39.7$0^{\circ}C$/km, Mesozoic strata has 30.63$^{\circ}C$/km , Paleozoic strata has 22.32$^{\circ}C$/km, Proterozoic strata 23.15$^{\circ}C$/km geothermal gradient value. In the lithological aspect, plutonic rocks 33.96$^{\circ}C$/km, sedimentary rocks have 24.78$^{\circ}C$/km and sedimentary and volcanic rocks have 26.85$^{\circ}C$/km geotermal gradient value. The result can be used to develop geothermal energy and hot spring as a reference.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.3 s.37
• /
• pp.3-11
• /
• 2006

The need for edge detection about topography data from the high resolution satellite imagery is happening with increasing frequency according to many people utilize the its imagery as various fields recently. Many experts is recognizing of other GIS will make use of the road detection from the high resolution satellite imagery, including ITS (Intelligent Transportation Systems) and urban planning. This paper is comparative analysis of LPF (Low Pass Filtering) and HPF (High Pass Filtering) for roads edge detection from high resolution satellite imagery. As a result, LPF and HPF can be highlight selective pixels at edge area about input data. In case or applying to other techniques such as LPF for the same purpose, they aye more effective for wide road width which often cause the slight distortion of boundary or overall change of brightness values on the whole Image. Whereas, HPF has ability to enhance selectively detailed components in a target image.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.2
• /
• pp.113-122
• /
• 2021

Urban expansion, particularly converting sub-urban areas to residential and commercial land use in metropolitan areas, has been considered as a significant signal of regional economic development. However, this results in urban climate change. One of the key impacts of rapid urbanization on the environment is the effect of UHI (Urban Heat Island). Understanding the effects of urban land cover change on UHI is crucial for improving the ecology and sustainability of cities. This research reports an application of remote sensing data, GIS (Geographic Information Systems) for assessing effects of urban land cover change on the LST (Land Surface Temperature) and heat budget components in Ho Chi Minh City, where is one of the fastest urbanizing region of Vietnam. The change of urban land cover component and LST in the city was derived by using multi-temporal Landsat data for the period of 1998 - 2020. The analysis showed that, from 1998 to 2020 the city had been drastically urbanized into multiple directions, with the urban areas increasing from approximately 125.281 km² in 1998 to 162.6 km² in 2007, and 267.2 km² in 2020, respectively. The results of retrieved LST revealed the radiant temperature for 1998 ranging from 20.2℃ to 31.2℃, while that for 2020 remarkably higher ranging from 22.1℃ to 42.3℃. The results also revealed that given the same percentage of urban land cover components, vegetation area is more effective to reduce the value of LST, meanwhile the impervious surface is the most effective factor to increase the value of the LST.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.1
• /
• pp.114-131
• /
• 2023

The study empirically delves into the longitudinal transition of the urban core of Naju City in Korea. For the purpose, the ASA (Angular Segment Analysis) technique of Space Syntax has been adopted to investigate the cadastral maps on the GIS platform for the five chosen years since 1920. In particular, the global integration map as well as box plot statistics have been used to capture the time-series consequences. The findings indicate that the old downtown is no more a monocentric city core and the center of the City has far moved eastward near the new Gwangju-Jeonam Innovation City especially during the period between 2000 and 2020.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.3
• /
• pp.170-176
• /
• 2004

This study was carried out to establish a spatial decision support system for evaluating climatic aspects of a given geographic location in complex terrains with respect to the quality apple production. Monthly climate data from S6 synoptic stations across South Korea were collected for 1971-2000. A digital elevation model (DEM) with a 10-m cell spacing was used to spatially interpolate daily maximum and minimum temperatures based on relevant topoclimatological models applied to Jangsoo county in Korea. For daily minimum temperature, a spatial interpolation scheme accommodating the potential influences of cold air accumulation and the temperature inversion was used. For daily maximum temperature estimation, a spatial interpolation model loaded with the overheating index was used. Freezing risk in January was estimated under the recurrence intervals of 30 years. Frost risk at bud-burst and blossom was also estimated. Fruit quality was evaluated for soluble solids, anthocyanin content, Hunter L and A values, and LID ratio, which were expressed as empirical functions of temperature based on long-term field observations. AU themes were prepared as ArcGlS Grids with a 10-m cell spacing. Analysis showed that 11 percent of the whole land area of Jangsoo county might be suitable for quality 'Fuji' apple production. A computer program (MAPLE) was written to help utilize the results in decision-making for site-selection of new orchards in this region.

• Spatial Information Research
• /
• v.21 no.6
• /
• pp.91-98
• /
• 2013

Government introduces a Total Maximum Daily Loads(TMDL) which can be implemented for total pollutant amounts in 2004. Normally, the local governments have been calculated the amounts of pollutant discharge of each watershed using a water quality model. However, among the input data to use the water quality model, creating a schematic diagram of the stream or the modeling usually requires considerable amount of time and efforts due to the manual work. Therefore, this study tried to develop an algorithm which automates the creation of a schematic diagram for water quality modeling using the Korean Reach File capable of river network analysis. Further, this study creates a schematic diagram with the shape of a stream utilizing GIS capabilities. The diagram can be easily analyzed with overlapping various spatial information such as pollution sources and discharge points. This study mainly has automated element segmentation algorithm to divide streamflows into equal distance using line graphic data of Koran Reach File. Also, automated attribute input algorithm has also been developed to enable to insert element order and type into elements using point graphic data of Korean Reach File. For the verification of the developed algorithm, the algorithm was applied to kyungan stream basin to see the acceptable results. To conclude, it was possible to automate generating of schematic diagram of water quality model and it is expected to be able to save time and cost required for the water modeling. In future study, it is necessary to develop an automatic creation system of various types of input data for water quality modeling and this will lead to relatively easier and simple water quality modeling.

• Spatial Information Research
• /
• v.17 no.3
• /
• pp.341-350
• /
• 2009

As the power and scale of typhoons are growing due to global warming and socioeconomic damages induced by super-typhoons are increasing, it is important to estimate inundation damages and to prepare proper adaptation plans against an attack of the super-typhoon. In this paper, we estimated the inundation damages of urban area around Haeundae beach induced by super-typhoons which follow the route of Typhoon Maemi with the conditions of Typhoon Vera (Ise Bay in Japan, 1959), Typhoon Durian (Philippine, 2006) and Hurricane Katrina (New Oleans in U.S.A, 2005). The coastal area around the Haeundae beach (Busan and Gyeongnam province) is expectedly damaged by severe storm surges. In this study we calculated the rise of sea level height after harmonizing the different datum levels of land and ocean and estimated the inundation depth, inundation area and the amount of building damages by using airborne LiDAR data and GIS spatial analysis techniques more accurately and quantitatively. As many researchers are predicting that super-typhoon of overwhelming power will occur around the Korean peninsula in the near future, the results of this study are expected to contribute to producing coastal inundation map and evacuation planning.