• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.241-246
• /
• 2004

The ocean signal that reaches the detector of an imaging system after multiple interactions with the atmospheric molecules and aerosols was retrieved from the total signal recorded at the top of the atmosphere (TOA). A simple method referred to as 'Path Extraction' applied to the Landsat-TM ocean imagery of turbid coastal water was compared with the conventional dark-pixel subtraction technique. The shape of the path-extracted water-leaving radiance spectrum resembled the radiance spectrum measured in-situ. The path-extraction was also extended to the SeaWiFS ocean color imagery and compared with the standard SeaWiFS atmospheric correction algorithm, which relays on the assumption of zero water leaving radiance at the two NIR wavebands (765 and 865nm). The path-extracted water-leaving radiance was good agreement with the measured radiance spectrum. In contrast, the standard SeaWiFS atmospheric correction algorithm led to essential underestimation of the water-leaving radiance in the blue-green part of the spectrum. The reason is that the assumption of zero water-leaving radiance at 755 and 865nm fails due to backscattering by suspended mineral particles. Therefore, the near infrared channels 765 and 865nm used fur deriving the aerosol information are no longer valid for turbid coastal waters. The path-extraction is identified as a simple and efficient method of extracting the path radiance largely introduced due to light interaction through the complex atmosphere carried several aerosol and gaseous components and at the air-sea interface.interface.

• Journal of Korea Water Resources Association
• /
• v.57 no.6
• /
• pp.421-435
• /
• 2024

In April 2023, a wildfire broke out in Gangneung located in the east coast region due to the influence of the Yanggang-local wind. In this study, GIS-based RUSLE(Revised Universal Soil Loss Equation) and SEMMA (Soil Erosion Model for Mountain Areas) were used to evaluate the erosion rate due to vegetation recovery in a small watershed of the Gangneung WUI(Wildland-Urban Interface) fire. The small watershed of WUI fire has a low altitude range of 10-30 m and the average slope of 10.0±7.4° which corresponds to a gentle slope. The soil texture was loamy sand with a high organic content and the deep soil depth. As herbaceous layer regenerated profusely in the gully after the wildfire, the NDVI (Normalized Difference Vegetation Index) reached a maximum of 0.55. Simulation results of erosion rates showed that RUSLE ranged from 0.07-94.9 t/ha/storm and SEMMA ranged from 0.24-83.6 t/ha/storm. RUSLE overestimated the average erosion rate by 1.19-1.48 times compared to SEMMA. The erosion rates were estimated to be high in the middle slope where burned pine trees were widely distributed and the slope was steep and to be relatively low in the hollow below the gully where herbaceous layer recovers rapidly. SEMMA showed a rapid increase in erosion sensitivity under at certain vegetation covers with NDVI below 0.25 (Ic = 0.35) on post-fire hillslopes. Gentle slopes with high organic content and rapid recovery of natural vegetation had relatively low erosion rate compared to steep slopes. As subsequent infrastructure and human damages due to sediment disaster by heavy rain is anticipated in WUI fire areas, the research results may be used as basic data for targeted management and decision making on the implementation of emergency treatment after the wildfire.

• Spatial Information Research
• /
• v.12 no.3
• /
• pp.275-283
• /
• 2004

In order to effectively, and accurately assess seawater intrusion in coastal area, multidisciplinary data including geophysical, well logging, and hydrogeochemical data should be managed in systematical way. Such systematical management of data is critical key to improve the re-usability of the data as well as the accuracy of the assessment by means of providing a method of synthetic analysis. Therefore, for systematical management of multidisciplinary data in seawater intrusion problem, we have developed a database management system and 3-D visualization interface based on geographic information system in this, study. All geophysical survey, well logging, hydrochemical, as well as drilling, data are classified as attribute data using Microsoft Access, and joined with spatial information based on ArcView. The database management system and 3-D visualization interface to handle these data, also, developed using the script language of ArcView. We think the development of database and 3-D visualization system will improve the efficiency of data management, user-friendliness of data access, and accuracy of data analysis.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.180-194
• /
• 2017

Agricultural hazards management technology, which would allow individual farms to respond preemptively, has been developed. A preliminary system developed in the previous study provides precise weather forecasts by farms, notification of weather hazards by crops and delivery of response guidelines (http://www.agmet.kr). Although the GIS map-based alarm system has been implemented for a number of farmers and their farms, its user interface was not designed for individual users who seek information at their farms. In this study, we have developed a mobile application to provide early warnings of weather hazards up to 10 days in advance. A set of information including field-specific weather, crop growth stages and weather hazard alerts can be delivered to individual farmers through their mobile phone. This would guide users to access the map-based system using their smartphone to obtain field-specific weather information by the growth stage of cultivated crops. This would help the farmers make the better use of the existing weather-hazard GIS map-based alarm system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.48-58
• /
• 2003

Recently in order to extinguish the large scale of forest fire efficiently and rapidly the forest fire extinguishment equipment such as helicopters and vehicles has been mobilized. In this situation, the most consideration for the effective extinguishment is to understand the forest fire surrounding area and situation very well and arrange and manage the extinguishment equipment timely. In this paper, the client/serve-based forest fire extinguishment helicopter management system was constructed by integrating GPS(global positioning system) and GIS(geographic information system) technologies. This system manages and considers not only extinguishment equipment information such as helicopters and vehicles including manpower arrangement but also extinguishment environment information such as storing reservoir status and road situation and so on. For this, the real time tracking of helicopter location was first acquired through GPS technology then all the information about forest fire surrounding area was offered through the user-friendly interface of GIS concept. The result of constructing this system helps to extinguish a large scale of forest fire rapidly and effectively within shorter time then reduces physical damage and much manpower mobilization.

• Journal of Korea Water Resources Association
• /
• v.31 no.1
• /
• pp.35-44
• /
• 1998

An integrated system of GIS and water quality model was suggested including the pollutant loads from the watershed. The developed system consists of two parts. First part is the GIS module. The geographic information system of the study area was built to provide the information on landuse and several surface factors concerning the overland flow processes of water and pollutants. Second part is the modeling modules which include storm event pollutant load model(SEPLM)., non-storm event pollutant load model(NSPLM), and river water quality simulation model(RWQSM). Models can calculate the pollutant load from the study area. The databases and models are linked through the interface modules resided in the overall system, which incorporate the graphical display modules and the operating scheme for the optimal use of the system. The developed system was applied to the Chungju multi-purpose reservoir to estimate the pollutant load during the four selected rainfall events between 1991 and 1993,. based upon monthly basis and seasonal basis in drought flow, low flow, normal flow and wet flow.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.4
• /
• pp.337-345
• /
• 2022

For data such as rainfall and soil moisture, it is important to obtain the values of all points required as geostatistical data. Spatial interpolation is generally performed in this process, and commercial software such as ArcGIS is often used. However, commercial software has fatal drawbacks due to its high expertise and cost. In this study, R, an open source-based environment with ArcGIS, a commercial software, was used to compare the differences according to the processing environment when performing spatial interpolation. The data for spatial interpolation was weather forecast data calculated through Land-Atmosphere Modeling Package (LAMP)-WRF model, and soil moisture data calculated for each cumulative rainfall scenario. There was no difference in the output value in the two environments, but there was a difference in user interface and calculation time. The results of spatial interpolation work in the test bed showed that the average time required for R was 5 hours and 1 minute, and for ArcGIS, the average time required was 4 hours and 40 minutes, respectively, showing a difference of 7.5%. The results of this study are meaningful in that researchers can derive the same results in a commercial software environment and an open source-based environment, and can choose according to the researcher's environment and level.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.268-271
• /
• 2004

Today, the vehicle is used the mean of transportation as well as the mobile office with the third digital life space. So telematics is an emerging industry that has tremendous future potential. It is necessary the essential contents for telematics services : navigation map for navigation, POI, real-time traffic information etc. In this paper, we proposed the telematics contents server to manage the telematics contents with efficient performance in distributed environment. The telematics contents server transforms and stores the essential contents and provide it to user through standard interface. The telematics contents server is middleware to offer a rapid essential telematics contents management, client connectivity, and communications. It is useful for the telematics service provider to build telematics system under distributed environment.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.283-286
• /
• 2004

This paper refers and implements XML Web services, which supports networked interchanges of moving object information. XML Web services are expected to be fundamental building blocks in the move to distributed computing on the Internet. As an interchange format, GML encodes semantics, syntax, and schema of geospatial and geoprocessing-related information resources. It can give great benefits to utilize raw data easily as an XML encoding format does. This paper proposes a full coverage of interoperable location trajectory services consisting of 3 independent modules: a moving object database, a data processing server, and a web services interface module. For communications, SOAP protocols and WSDL documents are used, which can guarantee an interoperability of a system regardless of different platforms and service channels. This paper also designs a GML data format that represents location information of probe cars.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.467-470
• /
• 2003

The size, scale, and number of subwatersheds can affect a watershed modeling process and subsequent results. The objective of this study was to determine the appropriate level of subwatershed division for simulating streamflow. The Soil and Water Assessment Tool(SWAT) model with a GIS interface(BASINS SWAT) was applied to Yongdam Dam watershed. Daily output was analyzed from simulation, which was executed for 10 years using climate data representing the 1987 to 1996 period. The optimal number of subwatersheds and HRUs to adequately predict streamflow was found to be around 15, 174. Increasing the number of subwatersheds and HRUs beyond this level does not significantly affect the computed streamflow. this number of subwatersheds and HRUs can be used to optimize SWAT input data preparation requirements and simplify the interpretation of results without compromising simulation accuracy.