• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.984-993
• /
• 2009

There have been growing concerns of algal growth at Daecheong reservoir due to eutrophication with excess nutrient inflow. Rainfall-driven runoff and pollutant from watershed are responsible for eutrophication of the Daecheong reservoir. In this study, two subwatersheds of the Daecheong reservoir were selected and water quality characteristics were analyzed. The L-THIA ArcView GIS model was used for evaluation of direct runoff and water quality. The $R^2$ and the EI value for direct runoff were 0.95 and 0.93 at Wol-oe watershed and were 0.81, 0.71 at An-nae watershed, respectively. The $R^2$ for SS, T-P were 0.53, 0.95 at Wol-oe watershed and 0.89, 0.89 at An-nae watershed, respectively. It has been proven that the L-THIA ArcView GIS model could be used for evaluating direct runoff and pollutant load from the watershed with reasonable accuracies.

• Journal of Environmental Impact Assessment
• /
• v.15 no.4
• /
• pp.271-277
• /
• 2006

In this study, we investigated the applicable plan of GIS on the environmental impact assessment of 60 Hz Powerline. So we assessed distance data based on calculations by use of 2D and 3D Geographical information systems(GIS) and distance data based on measurements on 1: 5000 maps accord with on site distance measurements to use input data for calculating magnetic field. One hundred eight of the on site measured addresses were selected from residences. The data were achieved by measuring the distance between residence and power line on maps with scales of 1: 5000. The digital map was obtained from National Geographic Information Institute with scales of 1: 5000, and we made 2D and 3D map. Correlation analyses were performed for statistical analyses. For the 3D GIS versus on site comparison of different exposure categories, 70 of 108 measurements were assigned to the correct category. Similarly for 2D GIS versus on site comparison, 71 of 108 were correctly categorized. When comparing map measurement with on site measurement, 62 of 108 were correctly categorized. When the correlation analysis was performed, best correlation was found between 3D GIS and on site measurements with r = 0.84947 (p<0.0001). The correlation between map and on site measurement yielded an r of 0.76517 (p<0.0001). Since the GIS measurements and map measurement were made from the center point in the building and the on site measurements had to be made from the closest wall on the building, this might introduce and additional error in urban areas. The difference between 2D and 3D calculations were resulted from the height of buildings.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.341-352
• /
• 2001

This study was carried out to developed that appraisement model of Potential Productivity Index(PPI). PPI model was used Farmland Productivity Index(FPI) and Labor Productivity Index(LPI) by GIS, and PPI model applied to farm land consolidation region which has been completed recently. FPI was determined by overlapping Poly Grid of the soil properties at the analyzed project region. LPI was estimated by addition productive wages ratio of total direct productive cost. Addition productive wages determined by GIS Network analysis GIS Network analysis of working distance between farm house to paddy and each paddy. PPI variation of each the analyzed paddy of Masu and Weoncheon region was 0.967~0.780 respectively, and could be showed relative largely PPI value. PPI will provide basic element for large scaling and gathering of farm land and a substitute lot of farm land consolidation, and will be maximize productivity of paddy.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.51-58
• /
• 1998

This paper deals with the power frequency electric and magnetic profiles from transformer and gas-insulated swichgear(GIS) perimeters in the indoor power substation. Measurements of electric and magnetic field magnitudes were carried out by using single axis and three axes field meters at a height of 1[m]. The resultant electric and magnetic field profiles measured in the vicinity of the transformer were displayed as a 2-dimensional plot. The electric fields intensity are relatively low value of about 2.3~9[V/m], and the magnetic fields intensity range from 0.3 to [$20.3\mu$T]. Also, in the GIS perimeter the electric fields intensity are in the range of 2.2~2.5[V/m], and the high magnetic fields are largely localized to the intermediate section of the GIS and their amplitudes are [$1.2~39.5\mu$T]. Metal enclosures of transform and GIS play a role in reducing the electric field, and the magnetic fields are characterized by a rapid decrease with distance from the transformer and GIS enclosures.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.85-87
• /
• 2001

최근 지리 정보 시스템(GIS)이 전 국가적으로 대중화되면서 지리 정보가 다양한 분야와 다양한 서버 환경에서 사용되고 있다. 따라서, 이렇게 다양해진 지리 정보를 효율적으로 사용하기 위해선 지리 정보 시스템의 상호운용성은 필수적이다. 이를 지원하기 위해서 OGC(Open GIS Consortium)에서는 상호운용성에 대한 표준 명세인 OpenGIS(Open Geodata Interoperability Specification)를 제시하였으며, 또한 이를 웹 환경에서 검증하고 활용하기 위해 웹 매핑 테스트 베드에서 여러 가지 시도를 하고 있다 이러한 시도 중 하나로 웹 환경의 이질적인 지리 정보를 공통적으로 표현하기 위해 지리정보를 구조화된 문서인 XML(eXtensible markup Language)로 인코딩하는 GML(Geography Markup Language) 명세를 제시하였다. 본 논문에서는 다양한 환경에서 지리 정보를 표현하기 위한 GML 2.0 명세와 GML 2.0 에서 사용하고 있는 XML 스키마 명세를 분석하였다. 또한, 이를 토대로 사용자들이 GML 2.0 문서를 쉽게 생성, 디스플레이, 편집할 수 있도록 함은 물론 기존의 공간 데이타베이스 시스템의 지리 정보를 GML 2.0 문서로 변환하고, 반대로 GML 2.0 문서를 공간 데이타베이스로의 변환을 쉽게 할 수 있는 GML문서 관리 시스템을 설계 및 구현하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2009.01a
• /
• pp.407-410
• /
• 2009

인터넷이 등장하고 대중화되면서 웹 1.0의 개념에서 웹 2.0을 지나 웹 3.0을 바라보고 있다. 이러한 웹의 발전 과정에서 시맨틱 웹이 등장하게 되었고 시맨틱 웹이 GIS와 접목되어 시맨틱 GIS가 등장하게 되었다. 기존 GIS 시스템에서는 사용자들이 국한된 정보만을 제공받아 왔지만 웹이 발전하고 수많은 컨텐츠가 생성되면서 웹의 데이터를 GIS와 연결시켜서 사용자에게 풍부한 정보를 제공 할 수 있는 시스템이 연구, 개발되고 있다. 하지만 기존 연구들은 Learning 및 Population 기법 부재로 인하여 시맨틱 웹에서 지향하는 풍부한 서비스 제공에 어려움을 겪고 있다. 따라서 이 논문에서는 Learning 및 Population 기법을 통해 웹으로부터 비공간 정보를 추출하여 서비스 할 수 있는 시맨틱 GIS 시스템 모델을 설계한다. 이 구현 모델의 기대효과로 사용자는 구현 될 시스템을 사용하여 특정 공간에 대한 비공간 정보들을 웹으로부터 수집하여 사용자에게 풍부한 정보를 제공할 수 있다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.6
• /
• pp.246-252
• /
• 2002

This paper describes the acoustic emission measurement method to diagnose GIS for particles. We measured and analyzed the signals of acoustic waves using acoustic two types sensors with 125KHz and 50KHz resonant frequency respectively when the particles were dropped on the surfaces of circular plates and inside of GlS tanks. We found that the difference between peak outputs of two sensors depended on the types and materials of particles and the conditions of dropping position. These results showed that the outputs of 125KHz sensor were higher than those of 50KHz sensor in circular plate and 362㎸ GIS tank made of steel and vice versa in circular plate and 800㎸ GIS tank made of aluminum. The ratios outputs of 125KHz sensor to those of 50KHz sensor were 1.4 - 2.37 in 800㎸ GIS tank and were 0.5 - 1.0 in 362㎸ GIS tank. Therefore we knew that adaption of two types acoustic sensors which had different resonant frequencies as a very useful method in diagnosis of GIS.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.2
• /
• pp.175-181
• /
• 2024

In electrical power substations, bulky iron-core potential transformers (PTs) are installed in a tank of gas-insulated switchgear (GIS) to measure system voltages. This paper proposed a low-power voltage transformer (LPVT) that can replace the conventional iron-core PTs in response to the demand for the digitalization of substations. The prototype LPVT consists of a capacitive voltage divider (CVD) which is embedded in a spacer and an impedance matching circuit using passive components. The CVD was fabricated with a flexible PCB to acquire enough insulation performance and withstand vibration and shock during operation. The performance of the LPVT was evaluated at 80%, 100%, and 120% of the rated voltage (38.1 kV) according to IEC 61869-11. An accuracy correction algorithm based on LabVIEW was applied to correct the voltage ratio and phase error. The corrected voltage ratio and phase error were +0.134% and +0.079 min., respectively, which satisfies the accuracy CL 0.2. In addition, the voltage ratio of LPVT was analyzed in ranges of -40~+40℃, and a temperature correction coefficient was applied to maintain the accuracy CL 0.2. By applying the LPVT proposed in this paper to the same rating GIS, it can be reduced the length per GIS bay by 11%, and the amount of SF6 by 5~7%.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.81-90
• /
• 2013

The purpose of this paper is to do GIS-based suitable site selection using Scope for Growth index of Styela clava in Jindong Bay. The aquaculture of Styela calva is only conducted in Korea, especially Jindong Bay. Suspended culture of Styela clava was initiated in 2001 and the annual production reached 15,084M/T, but declined to 1,412M/T in 2005. The annual production was increased slightly to 2,484M/T in 2012 but the production is lower than the beginning yield. Scope for Growth(SFG) can indicate interrelationships between environment and organism growth index in aquaculture. GIS-based suitable site selection can be available by the concept of SFG, and fishery management system can be constructed for the sustainable production. As a result of the assessment of habitat suitability, Jindong Bay's SFG value ranges 0.054~0.57J/day and Styela clava farm's SFG values range 0.054~0.57J/day, either. The correlation between Styela clava farm's SFG and the actual production has a good result, as r=0.786, p<0.05. The construction of fishery management system using habitat suitability index ensures the reasonable site selection and the sustainable production in aquaculture farm. It introduces an objective method for the interrelationships between the environmental variation and the organism growth. Consequently, it can promote the decision making practices for the sustainable fishery management.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1139-1143
• /
• 2010

대청호 수질관리를 위한 대책 수립시 상류유역의 유출 및 오염부하배출 특성을 평가하는 것이 중요하다. 유역의 수환경 영향을 평가하기 위해서 복잡한 수문 수질 모델을 이용하는데 사용자 편의성을 고려한 모델 개발과 이용이 필요하다. L-THIA ArcView GIS 모형은 토지이용도, 토양도, 일강우 자료만으로 직접유출의 모의가 가능하여 전 세계적으로 널리 이용되고 있다. 본 연구에서는 L-THIA ArcView GIS 모형을 이용하여 대청호 상류유역인 안내천, 월외천 유역의 직접유출 및 비점오염 배출부하 특성을 평가하였다. 직접 유출량 평가 결과, 결정계수($R^2$)와 유효지수(EI)가 월외천 유역 및 안내천 유역에서 각각 0.95, 0.93 및 0.81, 0.71로 나타나, L-THIA ArcView GIS 모형이 실측치를 잘 재현하는 것으로 나타났다. 강우유출수에 포함된 SS 및 T-P 오염부하량 평가결과, 결정계수($R^2$)가 월외천 유역과 안내천 유역에서 각각 0.53, 0.95 및 0.89, 0.89로 평가되었다. 또한 유효지수(EI)가 월외천 유역과 안내천 유역에서 각각 0.44, 0.95 및 0.98, 0.99로 평가되었다. SS 부하량 평가 결과에서 월외천 유역이 안내천 유역보다 정확성이 낮은 것은 지역특성에 따라 SS 부하량 차이가 크기 때문이다. 따라서 L-THIA ArcView GIS 모형의 지속적인 개선이 이루어진다면 대청호 만입부 상류유역에서의 각종 수질관리대책 평가에 활용될 수 있을 것으로 판단된다.