• Resources Recycling
• /
• v.30 no.3
• /
• pp.47-54
• /
• 2021

Palladium present in colloidal-type plated spent catalyst solution that is used in electroless plating process has not been recovered but discharged as wastewater so far. Recyclig of paladium in colloidal-type plated spent catalyst solution is achieved with this study. This study presents the estimation of resource consumption and GHG emissions during the recycling and disposal of palladium in the plated spent catalyst solution using life cycle assessment. The reduction of resources and GHG are also estimated. Based on the palladium amount of 1 kg during disposal, the GHG emission amount was estimated to be 9.67E+03 kgCO₂eq., and the amount of resource consumption was 3.94E+01 kgSb-eq. However, GHG emission was 1.96E+03 kgCO₂eq., and the amount of resource consumption was 1.54E+01 kgSb-eq. during recycling. Considering the major substances affecting GHG emissions and amount of resource consumption, CO₂ was found to significantly affect GHG emissions, accounting for 91.42% in disposal and 98.37% in recycling. The major substance affecting the amount of resource consumption was hard coal, which accounted for 40.63% in disposal and 60.73% in recycling. Upon recycling 1 kg palladium, 8,967.17 kgCO₂eq. of greenhouse gas emission was reduced, while the resource consumption was reduced to 10.10 kg Sb-eq. In addition, the direct palladium resource reduction rate due to palladium recycling was 50%.

• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.54-62
• /
• 2011

Since the release of mid-term domestic GHG goals until 2020, in 2009, some various GHG reduction policies have been proposed. In case of the transportation sector for the mid-term domestic GHG goals, it targets to reduce about 30% regarding the doemstic economic growth until 2020. A major reduction method in passenger cars considers an electric car. In this study we analyze some various scenarios to compare between internal combustion engine car and electric car using break-even analysis. Through the analysis we suggest a subsidy policy for electric car.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.420-421
• /
• 2006

The cost-effective reduction of greenhouse gas(GHG) emission to avert the most severe impacts of climate change remains one of the widely accepted priorities for global action. In order to facilitate cost-effective abatement strategies, the Kyoto Protocol introduced three mechanisms, or flexible instruments, the Emissions Trading(ET), the Joint Implementation(JI) and the Clean Development Mechanism(CDM). The CDM enables Annex I countries to the Kyoto Protocol to partially meet cost-effectively their emission reduction commitments by undertaking GHG mitigation Projects in developing countries, which do not have any GHG abatement obligations and where the emission reductions are cheaper. One of the major barriers hampering the wide spread implementation of CDM is the high transaction costs associated with the initial identification of promising CDM projects. This paper presents development of a pre-validation program of CDM. The developed program may provide a useful aid to potential investors and project developers as a supportive pre-evaluation tool, and may become an effective tool for the promotion of renewable energy and fuel switching projects.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.372-374
• /
• 2008

Korea classified into a development country when UNFCCC was concluded in 1995. So Korea doesn't have a GHG reduction duty until 2012. As the UNFCCC is strengthened, recently there is a growing interest in renewable energy and energy usage efficiency improvement for reducing GHG emission. It is associated with CES and renewable energy. CES is a total energy (heat, cooling and power)supplier in aggregated demand zone like a hotel, building, hospital and redevelopment district using CHP and it improves energy usage efficiency. At present, renewable energy is needed for GHG reduction duty but renewable energy doesn't have economic feasibility. So renewable energy is needed various support system to popularize which is a FIT and RPS. Especially RPS is carrying out instead of FIT in many advanced country and it will be inroduced in Korea. RPS is a duty which electricity service provider must guarantee renewable energy as much as specific ratio of total capacity. Therefore this study conducts an economic feasibility estimation of CES considering renewable energy when RPS will introduced in the future.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.6
• /
• pp.27-37
• /
• 2014

Heat island is caused by changes of land coverage structure of cities and use of energy in buildings. As a result energy use in buildings get to increase further followed by rising of GHG emission and deteriorating climate change. Eco-friendly housing complex is a kind of plan that applies environmental control elements like water and green spaces to housing complex. With these methods, it can be expected to create thermal environment of indoor and outdoor. In this paper quantitative examination is studied on using CFD to find out the effects of river, water permeable, parks and planting on thermal environment. And by comparing field measurements with CFD results which are aimed to development phase housing complex, feasibility and usability of the CFD analysis results are confirmed. And also, analysis on the ventilation performance followed by natural ventilation system is analyzed by selecting one building in housing complex. Based on the results, the possibilities of energy reduction through making thermal environment and applying natural ventilation are studied. With these outcomes, creating thermal conditions and using natural ventilation would be contributed to GHG reduction.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.75-79
• /
• 2023

The International Maritime Organization (IMO) Marine Environmental Protection Committee (MEPC) may adopt actions after completing impact assessments and reviewing results in accordance with the original strategy and impact assessment procedure (MEPC.1/Circ.885). The assessment of the impact of greenhouse gas (GHG) reduction measures is an important step in determining whether to implement GHG regulations. This study identifies and proposes improvements in the impact assessment procedure for future mid- and long-term measures. Improvements for future measures should start with a review of "the procedure for assessing impacts on states of candidate measures" and "the actual process of the comprehensive impact assessment for short-term measures in 2021." The procedural improvements were largely derived from the order and period of task performance, the clear definition of terms, and the review of task results through lessons learned, analysis, and expert workshops. The impact assessment of future mid- and long-term measures should be procedurally improved to ensure uniformity and consistency, which will provide objective results for Member States and industries to help smooth the adoption of measures.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.5
• /
• pp.374-380
• /
• 2014

To estimate greenhouse gas (GHG) emission, the inventory of rice cultivation at the farming without agricultural chemicals was established from farmers in Gunsan, Jeonbuk province in 2011~2012. The objectives of this study were to calculate carbon footprint and analyse the major factor of GHGs. To do this, we carried out a sensitivity analysis using the analyzed main factors of GHGs and estimated the mitigation potential of GHGs. Also we suggested agricultural methods to reduce GHGs that can be appled by farmers at this region. At the farming system without agricultural chemicals, carbon footprint of rice production unit of 1 kg was 2.15 kg $CO_2.-eq.kg^{-1}$. Although the amount of carbon dioxide ($CO_2$) emission was the largest among GHGs, methane ($CH_4$) emission had the highest contribution to carbon footprint on rice production system when it was converted to carbon dioxide equivalent ($CO_2-eq.$) multiplied by the global warming potential (GWP). Main source of $CO_2$ emission in the rice farming system without agricultural chemicals was combustion of fossil fuels used by agricultural machinery. Most of the $CH_4$ was emitted during rice cultivation practice and its major emission factor was flooded paddy field in anaerobic condition. Also, most of the $N_2O$ was emitted from rice cultivation process. Major sources of the $N_2O$ emission was application of fertilizer such as compound fertilizer. As a result of sensitivity analysis in energy consumption, diesel had the highest sensitivity among the energy inputs. With the reduction of diesel consumption by 10%, it was estimated that $CO_2$ potential reduction was about 2.0%. With reducing application rate of compound fertilizer by 10%, the potential reduction was calculated that $CO_2$ and $N_2O$ could be reduced by 0.5% and 0.9%, respectively. At the condition of 10% reduction of silicate and compost, $CO_2$ and $CH_4$ could be reduced by 1.5% and 1.6%, respectively. With 8 days more drainage than the ordinary practice, $CH_4$ emission could be reduced by about 4.5%. Drainage and diesel consumption were the main sources having the largest effect on the GHG reduction at the farming system without agricultural chemicals. Based on the above results, we suggest that no-tillage and midsummer drainage could be a method to decrease GHG emissions from rice production system.

• Journal of the Korean Society for Railway
• /
• v.15 no.3
• /
• pp.286-293
• /
• 2012

Korean government is enforcing 'Greenhouse gas target management' in order to achieve Greenhouse gas reduction target. To attain Greenhouse gas reduction target, companies in Korea must establish their GHG inventory system and analysis their GHG emissions characteristics for deduction of mitigation measures. LMDI(Log Mean Divisia Index) decomposition analysis is widely used to understand characteristics of GHG emission and energy consumption. In this paper, the characteristics of GHG emission from the line of railroad in Korea is respectively analyzed in terms of conversion effect, intensity effect, production effect and distance effect. Data of railroad GHG emission from 2000 to 2007 are used. As a result, total effect of railroad's GHG emission is $96,813tCO_2eq$. Production effect ($39,865tCO_2eq$) and distance effect ($327,923tCO_2eq$) affect increase of railroad GHG emissions while Conversion effect ($-158,161tCO_2eq$) and intensity effect ($-112,814tCO_2eq$) influence decrease of the emissions.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.1
• /
• pp.1-16
• /
• 2023

As the Intergovernmental Panel on Climate Change (IPCC) emphasized the transition to a carbon-neutral society globally by 205 0, major countries such as Korea, Japan, and Europe declared carbon-neutral goals. The agricultural sector is a carbon-absorbing sector, and its importance has increased as the General Assembly of the Parties to the Climate Change Convention (COP 26) held in the UK in November 2021 emphasized the role of agriculture to discuss climate change. However, GHG reduction projects in the agricultural sector are not properly monitored considering the domestic situation, and a system for quantitative evaluation of the effectiveness or basis of implementing the project program is not in place. Therefore, a priori study is needed to understand the current status of existing policies and to review matters that need to be improved in order to facilitate policy design, implementation, and monitoring for GHG reduction in the agricultural sector. The purpose of this study is to examine the opinions of stakeholders by applying a semi-structured interview method to diagnose the current status of Korea's GHG reduction policy in the agricultural sector and identify factors that hinder policy implementation. As a result of the semi-structured interview, this study presented factors that hinder the promotion of GHG reduction policies in the agricultural sector according to four types of data and technology, finance, institutions, and perceptions. Some stakeholders also stressed that the pilot project could be helpful as a way to comprehensively consider the implications of this study, such as securing technology data, establishing a system for verifying effectiveness, and providing incentives and promoting them. Rather than drawing specific conclusions, this study is an exploratory study that diagnoses and reviews the progress of GHG reduction policies, and it can be used as useful basic data if it secures enough interview respondents and balances the number of samples by group.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.2
• /
• pp.264-286
• /
• 2008

In 2006, the share of energy in Korea amounted to 28% from the total import, 97% from overseas dependency, and 83% for the national Greenhouse Gas (GHG) emission in 2004. Thus, from the aspects of economical and environmental policies, an energy analysis is very important, for the industry to cope with the imminent pressure for climate change. However, the estimation of GHG gas emissions due to an energy use is still done in a primitive way, whereby each industry's usage is multiplied by coefficients recommended from international organizations in Korea. At this level, it is impossible to formulate the prevailing logic and policies in face of a new paradigm that seeks to force participation of developing countries through so called post-Kyoto Protocol. In this study, a hybrid energy input-output (E-IO) analysis is conducted on the basis of the input-output(IO) table of 2000 issued by the Bank of Korea in 2003. Furthermore, according to economic sectors, emission of the GHG relative to an energy use is characterized. The analysis is accomplished from four points of view as follows: 1) estimating the GHG emission intensity by 96 sectors, 2) measuring the contribution ratio to GHG emissions by 14 energy sources, 3) calculating the emission factor of 3 GHG compounds, and 4) estimating the total amount of national GHG emission. The total amount estimated in this study is compared with a national official statistical number. The approach could be an appropriate model for the recently spreading concept of a Life Cycle Analysis as it analyzes not only a direct GHG emission from a direct energy use but also an associated emission from an indirect use. We expect this model can provide a form for the basis of a future GHG reduction policy making.