• 제목/요약/키워드: GEARING

검색결과 77건 처리시간 0.024초

고부하 동력 전달용 WILDHABER-NOVIKOV GEAR의 치형과 강도에 대한 연구 (A Study on the, Tooth Profile and Strength of WILDHABER-NOVIKOV Gear for high Power Transmission)

  • 최상훈;박용우
    • 한국정밀공학회지
    • /
    • 제1권3호
    • /
    • pp.85-94
    • /
    • 1984
  • The WILDHABER-NOVIKOV gear, one of the circular arc gears, has the large contact area between the convex and concave profiled mating teeth, moves from one end of the tooth to the other axially making a face contact. Hence it provides a large load capacity than the Involute gear and still satisfying the law of gearing. In order to analyze the gear stress, a photoelastic investigation was carried out. Photo elastic model of the WILDHABER-NOVIKOV gears were made of Araldite CT200 in this investigation. For both the many teeth gear and the few teeth gear segments, External gears of all addendum type WILDHABER-NOVIKOV gear and the involute gear were tested. Included were the models with various profile raddi at the same pressure angle 20 .deg. and module 13.5. The flank stresses and fillet stresses of these gears were observed in each case and compared with those of gears. From this investigation, the following results were obtained. A. In the case of having many teeth gear: As the profile radius is increased, the fillet stresses of the WILDHABER-NOVIKOV gear become the same or less than that of the INVOLUTE gea, and the flank stress becomes smaller than that of the INVOLUTE gear. Therefore the better design condition is satisfied with a large profile radius. B. IN the case of having a few teeth gear: As the profile radius is increased the flank stress of WILDHABER-NOVIKOV gear becomes smaller than that of the INVOLUTE gear, but the fillet stresses become larger than that of the INVOLUTE gear. Therefore the larger design condition is satisfied with small profile radius.

  • PDF

도시 재난 관리를 위한 u-철도 방재시스템 설계에 관한 연구 (A study on the Design of a u-railroad Disaster Prevention System for Urban Disaster Prevention Management)

  • 함은구;노삼규
    • 한국화재소방학회논문지
    • /
    • 제24권1호
    • /
    • pp.72-80
    • /
    • 2010
  • 본 연구에서는 모든 발생 가능한 철도 사고시나리오를 기반으로 비상대응절차를 정의하여 철도사고 별 비상대응 절차를 구축하였으며 이를 유비쿼터스 센서 네트워크 시스템과 연동하여 u-철도 방재시스템을 제안하였다. u-철도 방재 시스템은 u-예방 시스템, u-대비시스템, u-대응 시스템, u-복구 시스템 4개의 단위 시스템들로 구성되어 있으며 각각의 데이터베이스별로 분리되어 있다. 수집된 정보는 각 시스템별로 분석되고 각종 매체를 통해 정보를 제공하며, 연계된 타 시스템과 유기적으로 정보를 교환하는 구조로 설계되었다. 특히 u-철도 방재 시스템은 오감인지기능을 바탕으로 한 센서 네트워크와 모니터링 시스템을 통하여 비상사고 발생 시 적절한 초기 대응이 가능하도록 설계되었다. 또한 2차원, 3차원 공간 정보 인터페이스에 유비쿼너스 센서 네트워크와 예상 시나리오를 함께 연동시키므로 서 종합적 의사 결정이 가능하도록 구축하였다.

불영사계곡의 명승 지정구역 조정 및 현상변경 방안 연구 (Rearrangement of the Designated Area and Modification of Features of Buryeongsa Valley as a Scenic Site)

  • 안승홍;홍윤순;김학범
    • 한국조경학회지
    • /
    • 제37권6호
    • /
    • pp.48-56
    • /
    • 2010
  • 예로부터 우리나라는 경치가 아름다워 금수강산으로 일컬어 왔으며, 문화재보호법에서는 경치가 아름다운 자연경관뿐만 아니라 역사문화적 가치가 뛰어난 대상을 명승으로 지정하여 보존과 이용을 도모하는 자연문화재로서 운영하고 있다. 하지만 명승은 사적이나 여타 문화재와 같은 행위 제한방식을 중심으로 관리되고 있어 지역발전과 재산권 침해 등 역기능을 줄 뿐만 아니라 문화재로서의 지정 취지를 잘 이해하지 못 하고 있는 실정이다. 따라서 본 연구의 목적은 1979년 명승으로 지정된 불영사계곡을 대상으로 명승구역 경계의 조정과 현상변경 허용기준을 마련하여 주민들의 재산권을 보호하고자 하였으며, 연구결과를 요약하면 다음과 같다. 첫째, 명승구역의 경계조정은 산 능선의 가시권을 기준으로 한 외곽경계의 조정과 경관미를 상실한 훼손지의 지정구역 해제 그리고 기존 취락을 중심으로 내부 해제지에 대해 조정하였으며, 기 지정면적 대비 약 $11,928,932m^2$, 38.6%를 지정구역에서 해제하였다. 둘째, 경관 보존에 중대한 영향을 미치는 현상변경 기준으로 '문화재 외곽경계~500m 반경 이내'에 대한 완충구역을 설정하였다. 셋째, 건축물의 '높이규제' 허용기준은 지붕형태에 따라 평지붕과 박공형태로 나누고, 평지붕은 높이 8m와 2층, 박공의 경우 높이 12m와 2층으로 적용하였다.

Geotechnical Engineering Progress with the Incheon Bridge Project

  • Cho, Sung-Min
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.133-144
    • /
    • 2009
  • Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

  • PDF

Bacterial Logic Devices Reveal Unexpected Behavior of Frameshift Suppressor tRNAs

  • Sawyer, Eric M.;Barta, Cody;Clemente, Romina;Conn, Michel;Davis, Clif;Doyle, Catherine;Gearing, Mary;Ho-Shing, Olivia;Mooney, Alyndria;Morton, Jerrad;Punjabi, Shamita;Schnoor, Ashley;Sun, Siya;Suresh, Shashank;Szczepanik, Bryce;Taylor, D. Leland;Temmink, Annie;Vernon, William;Campbell, A. Malcolm;Heyer, Laurie J.;Poet, Jeffrey L.;Eckdahl, Todd T.
    • Interdisciplinary Bio Central
    • /
    • 제4권3호
    • /
    • pp.10.1-10.12
    • /
    • 2012
  • Introduction: We investigated frameshift suppressor tRNAs previously reported to use five-base anticodon-codon interactions in order to provide a collection of frameshift suppressor tRNAs to the synthetic biology community and to develop modular frameshift suppressor logic devices for use in synthetic biology applications. Results and Discussion: We adapted eleven previously described frameshift suppressor tRNAs to the BioBrick cloning format, and built three genetic logic circuits to detect frameshift suppression. The three circuits employed three different mechanisms: direct frameshift suppression of reporter gene mutations, frameshift suppression leading to positive feedback via quorum sensing, and enzymatic amplification of frameshift suppression signals. In the course of testing frameshift suppressor logic, we uncovered unexpected behavior in the frameshift suppressor tRNAs. The results led us to posit a four-base binding hypothesis for the frameshift suppressor tRNA interactions with mRNA as an alternative to the published five-base binding model. Conclusion and Prospects: The published five-base anticodon/codon rule explained only 17 of the 58 frameshift suppression experiments we conducted. Our deduced four-base binding rule successfully explained 56 out of our 58 frameshift suppression results. In the process of applying biological knowledge about frameshift suppressor tRNAs to the engineering application of frameshift suppressor logic, we discovered new biological knowledge. This knowledge leads to a redesign of the original engineering application and encourages new ones. Our study reinforces the concept that synthetic biology is often a winding path from science to engineering and back again; scientific investigations spark engineering applications, the implementation of which suggests new scientific investigations.

대전시 상징물과 도시 이미지에 대한 비교 분석 (An Analysis of the Comparison between the Image of the Landmarks in Daejeon)

  • 변재상;김대수;이정수
    • 한국조경학회지
    • /
    • 제38권2호
    • /
    • pp.53-63
    • /
    • 2010
  • 도시의 미래 모습을 결정하는 도시경관계획의 단계에서 도시 이미지가 어떻게 평가되고 있는가를 분석하여 바람직한 도시 이미지 형성 방향을 설정하는 것은 매우 중요한 선행과제가 된다. 본 연구의 목적은 시민들이 주체가 되어 도시의 이미지를 어떻게 인지하고 평가하는지를 다차원척도법과 대응일치분석을 이용하여 계량적으로 연구하는데 있으며, 나아가 전문가와 관련 공무원들의 인지 경향을 파악함으로써, 도시 이미지 향상에 기여할 수 있는 정량화된 정책 방향 설정에 도움이 되고자 수행되었다. 본 연구를 통해 도출된 결과는 다음과 같다. 1. 대전시 이미지는 주로 역사성, 역동성, 규모성 등에 의해 평가되는 경향이 강하였다. 이러한 기준에 따라 대전시는 전체적으로 새롭고 변화하는 이미지가 강한 도시로 인식되었으며, 공무원들에게는 소박한 느낌의 도시, 전문가들에게는 평범한 느낌의 도시로 인식되고 있었다. 따라서 소박하고 평범한 이미지에 대응할 수 있는 대전시 정체성과 개성을 찾는데 보다 노력하여야 할 것이다. 2. 대전시의 이미지에 많은 영향을 끼치는 상징물 혹은 상징적인 공간으로는 갑천이나 둔산 신도심, 대덕연구단지 등을 들 수 있다. 이에 비하여 유성온천과 원도심, 엑스포 공원 등은 대전시와 이미지가 크게 다르게 나타나고 있었다. 이에 따라 대전시의 이미지를 희석시키는 낙후된 시설과 상징물들의 현대적 리모델링이 필요하다. 3. 도시 이미지의 선호도를 알 수 있는 ‘좋은-싫은’의 형용사 이미지의 경우, 일반인과 전문가들에게 있어서는 모두 싫어하는 경향을 나타나고 있었으나, 공무원들은 좋아하는 이미지를 지니고 있었다. 따라서, 세 집단 모두 좋아하는 둔산 신도심이나 대덕연구단지 등과 같은 현대적 첨단산업의 이미지를 투영시킬 필요가 있다. 4. 대응일치분석을 통한 이미지 분포도에서 대전시는 행정도시와 수평적 도시의 특성이 강한 도시로 분류되었다. 기존의 단순한 도시 이미지 분석 연구와는 달리 본 연구에서는 분석 내용을 토대로 비교적 명확한 진단을 통해, 도시의 미래상 및 방향 설정에 도움을 주고자 노력하였다.

슈퍼슈퍼마켓(SSM)에 대한 개인 슈퍼마켓의 경쟁전략에 관한 연구 (A Study on the Competition Strategy for Private Super Market against Super Super Market)

  • 유승우;이상윤
    • 산경연구논집
    • /
    • 제2권2호
    • /
    • pp.39-45
    • /
    • 2011
  • 한국 유통산업이 무한 경쟁에 박차를 가하고 있다. 저성장시대를 맞으면서 각 소매업태간의 경쟁 중에 힘이 약한 자는 생존의 문제에 직결되기 마련이다. 근 수년간 대형할인마트가 매년 꾸준한 성장세를 보여 왔다. 그러나 점포수의 포화, 신규부지 확보의 어려움, 불경기로 인한 소비자의 소비행태 변화 등의 이유로 고객밀착형의 새로운 업태의 진출을 모색하게 되었다. 이에 따라 최근 대기업은 대기업 계열 기업형 슈퍼마켓을 만들었고 전통시장 상권에 따라서 대형유통업체의 막강한 바잉파워를 배경으로 SSM이라는 신업태에 역량을 집중하여 전국적 다점포화를 공격적으로 전개해 왔다. 이러한 출점은 지역사회에 기반을 둔 중소유통 그중에서도 일정규모이상의 개인 슈퍼마켓에 직격탄을 날리고 있다. 개인 슈퍼마켓과 소매상인들은 낡은 판매시설과 기존 운영방식으로 인하여 사업의 경쟁력을 잃어가고 있다. 최근 대기업 계열 기업형 슈퍼마켓의 전통시장 상권에 대하여 언론, 학계, 업계 등에서 매우 논란이 많고 이와 관련된 세미나와 공청회도 많이 열리고 있다. 이에 따른 규제로 출점 속도를 늦출 수는 있으나 결정적 대안은 아닐 것이다. 기업형 SSM이 최근 급증하는 이유는 정체로 접어든 오프라인 할인마트 업체들의 새로운 성장분야를 찾기 위한 목적이 크다. 이미 대형할인마트 형태로는 전국 대부분의 지리적 요지에 다 입점해 있어 포화상태에 이르렀기 때문이다. 할인마트로 커버하지 못하는 소규모 상권을 공략하기 위해서는 SSM 형태의 사업이 확대가 절실하다. 이에 반하여 개인 슈퍼마켓은 경쟁력을 잃어 간다. 개인 슈퍼마켓의 취약점은 가격적인 면에서 규모의 경제를 실현 할 수 없기에 소량으로 판매 물건을 구입하고 있으며, 이로 인해 구입단가 할인이 어려운 상황이다. 또한 조직화 및 협업화가 부진하고 상인교육이 활성화 되지 못한 부분이 서비스로 직결되기 때문에 힘든 상황이다. 이에 따른 해결책으로 농산물, 청과, 공산품 등의 전문점을 만들어 상권을 형성하는 방법이 있다. 둘째, 개인 슈퍼마켓의 가맹점 가입 추진을 통한 조직화. 협업화를 촉진하여 규모의 경제를 취득함과 동시에 정부에 제안 할 수 있는 하나의 기업형태가 되는 것이다. 셋째, 중소상인 교육의 활성화로 서비스 의식을 고취하고 좋은 서비스로 소비자를 모아야 한다는 점이다. 또한 SSM에서 할 수 없는 심리적 점포 운영으로 소비자의 심리를 자극 하는 것도 하나의 방법이 될 것이다. 일본에는 이미 전일식 체인으로 소상공인들의 생활이 한편 나아졌다. 이에 개인슈퍼마켓을 비롯한 중소유통점들의 취약 부분을 알아보고 경쟁력 강화 방안에 대해 자세히 제안하고자 한다.

  • PDF