• Food Science of Animal Resources
• /
• v.40 no.2
• /
• pp.209-220
• /
• 2020

Milk fat globule membrane (MFGM) is a lipid carrier in mammals including humans that consists mainly of polar lipids, like phospholipids and glycolipids. In this study, a process to enrich polar lipids in commercial butter and whey powder, including polar lipids of MFGM, was developed. WPC (whey protein concentrate) 60 was selected as the most suitable raw material based on the yield, phospholipid, protein, and lactose content of the polar lipid fraction obtained by ethanol extraction of two WPC (WPC60 and WPC70) and two buttermilk (A and B). After fractionation under optimum conditions, the polar-lipid enriched fraction from WPC60 contained 38.56% phospholipids. The content of glycolipids, cerebroside, lactosylceramide, ganglioside GM3, ganglioside GD3, was 0.97%, 0.55%, 0.09%, and 0.14%, respectively. Rancimat results showed that the oxidation stability of fish oil increased with an increase in the polar-lipid fraction by more than 30 times. In addition, the secretion of IL-6 and TNF-α decreased in a concentration-dependent manner after treatment of RAW 264.7 cells with 0.1 to 100 ppm of the polar lipid fraction. In this study, polar lipid concentrates with antioxidant and anti-inflammatory activity, were prepared from milk processing by-products. The MFGM polar lipid concentrates made from by-products are not only additives for infants, but are also likely to be used as antioxidants in cooking oils and as active ingredients for functional foods.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.3
• /
• pp.185-190
• /
• 2011

The principal objective of this study was to develop a discrimination method using SSR markers in Korean ginseng cultivars. Five cultivars--Chunpoong, Yunpoong, Gopoong, Sunpoong, and Kumpoong--were evaluated by nine markers out of 22 SSR markers. A total of 23 alleles were detected, ranging from 1 to 4, with an average of 2.6 alleles per locus, and an averages of gene diversity (GD) of 0.480. Nine markers were tested in order to distinguish among five Korean ginseng cultivars. Two markers out of nine SSR markers, GB-PG-065 and GB-PG-142, were selected as key markers for discrimination among Korean ginseng cultivars. Two genotypes were detected in GB-PG-065. Chunpoong and Kumpoong shared the same allele type, and Yunpoong, Gopoong, and Sunpoong shared another identical allele type. In the case of GB-PG-142, a specific allele type differentiated from those of other four cultivars was observed only in Sunpoong cultivar. Consequently, the SSR markers developed in this study may prove useful for the identification of Korean ginseng cultivars and the development of ginseng seed management systems, as well as tests to guarantee the purity of ginseng seeds.

• Nuclear Engineering and Technology
• /
• v.51 no.2
• /
• pp.432-438
• /
• 2019

In the study of nuclear structure, the fast timing technique can be used to measure the lifetime of excited states. In the paper, we have developed a new fast timing system, which is made up of two $LaBr_3:Ce$ detectors and a set of waveform sampling system. The sampling system based on domino ring sampler version 4 chip (DRS4) can digitize and store the waveform information of detector signal, with a smaller volume and higher timing accuracy, and the waveform data are performed by means of digital waveform analysis methods. The coincidence time resolution of the fast timing system for two annihilation 511 keV ${\gamma}$ photon is 200ps (FWHM), the energy resolution is 3.5%@511 keV, and the energy linear response in the large dynamic range is perfect. Meanwhile, to verify the fast timing performance of the system, the $^{152}Gd-2_1^+$ state form ${\beta}^+$ decay of $^{152}Eu$ source is measured. The measured lifetime is $45.3({\pm}5.0)ps$, very close to the value of the National Nuclear Data Center (NNDC: $46.2({\pm}3.9)ps$). The experimental results indicate that the fast timing system is capable of measuring the lifetime of dozens of ps. Therefore, the system can be widely used in the research of the fast timing technology.

• Clinical and Experimental Reproductive Medicine
• /
• v.43 no.1
• /
• pp.15-25
• /
• 2016

Objective: In the present study, we aimed to evaluate the effects of high doses of dexamethasone (DEX) in early pregnancy on pregnancy outcomes. Methods: Pregnant BALB/c mice were treated with high-dose DEX in the experimental group or saline in the control group on gestational days (GDs) 0.5 to 4.5. Pregnant mice were sacrificed on GDs 7.5, 13.5, or 18.5 and their peripheral blood, placentas, fetuses, and uterine tissue were collected. Decidual and placenta cell supernatants were examined to evaluate the effect of DEX on the proliferation of mononuclear cells, the quantity of uterine macrophages and uterine natural killer (uNK) cells, and levels of progesterone and $17{\beta}-estradiol$, as determined by an 3-(4,5-dimethylthiazole-2-yl)-2,5-diphenyltetrazolium bromide assay, immunohistochemistry, and enzyme-linked immunosorbent assay, respectively. We also were measured fetal and placental growth parameters on GD 18.5. Results: We found that high doses of DEX were associated with an increased abortion rate, enhancement of the immunosuppressive effect of the decidua, alterations in placental growth parameters, decreased progesterone and $17{\beta}-estradiol$ levels, and a reduced frequency of macrophages and uNK cells. Conclusion: Our data suggest that the high-dose administration of DEX during early pregnancy negatively affected pregnancy outcomes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.402.1-402.1
• /
• 2016

The performance of solid oxide fuel cells (SOFCs) is directly related to the electrocatalytic activity of composite electrodes in which triple phase boundaries (TPBs) of metallic catalyst, oxygen ion conducting support, and gas should be three-dimensionally maximized. The distribution morphology of catalytic nanoparticle dispersed on external surfaces is of key importance for maximized TPBs. Herein in situ grown nickel nanoparticle onto the surface of fluorite oxide is demonstrated employing gadolium-nickel co-doped ceria ($Gd0.2-xNixCe0.8O2-{\delta}$, GNDC) by reductive annealing. GNDC powders were synthesized via a Pechini-type sol-gel process while maximum doping ratio of Ni into the cerium oxide was defined by X-ray diffraction. Subsequently, NiO-GNDC composite were screen printed on the both sides of yttrium-stabilized zirconia (YSZ) pellet to fabricate the symmetrical half cells. Electrochemical impedance spectroscopy (EIS) showed that the polarization resistance was decreased when it was compared to conventional Ni-GDC anode and this effect became greater at lower temperature. Ex situ microstructural analysis using scanning electron microscopy after the reductive annealing exhibited the exsolution of Ni nanoparticles on the fluorite phases. The influence of Ni contents in GNDC on polarization characteristics of anodes were examined by EIS under H2/H2O atmosphere. Finally, the addition of optimized GNDC into the anode functional layer (AFL) dramatically enhanced cell performance of anode-supported coin cells.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.257.1-257.1
• /
• 2015

Cu(In,Ga)Se2 (CIGS) 박막 태양 전지에서 buffer layer는 CIGS 흡수층과 TCO 사이의 밴드갭 차이에 대한 문제점과 lattice mismatch를 해결하기 위해 필수적이다. 흔히 buffer layer 물질로는 CdS가 가장 많이 사용되고 있으나 Cd의 독성에 관한 문제가 야기되고 있다. 따라서 ZnS(O, OH) buffer layer가 친환경 물질로 기존의 CdS 버퍼 층의 대체 물질로 각광 받고 있으며, 단파장 범위에서 높은 투과율로 인해 wide band gap의 Chalcopyrite 태양 전지에 응용되는 buffer layer로 많은 연구가 이루어지고 있다. 또한 buffer layer를 최적화 하여 carrier lifetime과 양자 효율이 증가시킬 수 있는 특성을 가지고 있다. 이 연구에서는 Cu(In,Ga)Se2 (CIGS) 박막에 화학습식공정 (CBD) 방법을 이용하여 최적화된 ZnS(O, OH)의 증착 조건을 찾고, 고품질의 buffer layer를 제조하기 위한 실험에 초점을 맞췄다. 또한, buffer layer의 막질을 개선하고 균일한 막을 제조하기 위해 processing parameters인 시약의 농도, 제조 시간 및 온도 등의 다양한 변화를 통해 실험을 진행하였다. 그 후 최적화된 ZnS(O, OH) buffer layer의 특성 분석을 위해 X-ray diffraction(XRD), photoluminescence (PL), scanning electron microscope (SEM) and GD-OES을 이용하였고, 이를 통해 제조된 CIGS 박막 태양전지는 light induced current-voltage (LIV) and external quantum efficiency (EQE)를 통해 특성 분석을 실시 하였다. 결과적으로, 제조된 ZnS(O, OH) buffer layer의 $ZnSO4{\cdot}7H2O$의 농도는 0.16 M, Thiourea는 0.5 M, NH4OH는 7.5 M, 그리고 반응 온도는 77.5 oC의 조건 하에 CIGS 기판 위에 균일하고 균열이 없는 ZnS(O, OH) 박막을 제조하였으며 이때 제조된 태양전지의 소자 특성은 Voc = 0.478 V, Jsc = 35.79 mA/cm2, FF = 47.77%, ${\eta}=8,18 %$이다.

• Progress in Medical Physics
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2004

Patient dose verification is one of the most Important responsibilities of the physician in the treatment delivery of radiation therapy. For the task, it is necessary to use an accurate dosimeter that can verify the patient dose profile, and it is also necessary to determine the physical characteristics of beams used in intensity modulated radiation therapy (IMRT) The Beam Intensity Scanner (BInS) System is presented for the dosimetric verification of the two dimensional photon beam. The BInS has a scintillator, made of phosphor Terbium-doped Gadolinium Oxysulphide (Gd$_2$O$_2$S:Tb), to produce fluorescence from the irradiation of photon and electron beams. These fluoroscopic signals are collected and digitized by a digital video camera (DVC) and then processed by custom made software to express the relative dose profile in a 3 dimensional (3D) plot. As an application of the BInS, measurements related to IWRT are made and presented in this work. Using a static multileaf collimator (SMLC) technique, the intensity modulated beam (IMB) is delivered via a sequence of static portals made by controlled leaves. Thus, when static subfields are generated by a sequence of abutting portals, the penumbras and scattered photons of the delivered beams overlap in abutting field regions and this results in the creation of “hot spots”. Using the BInS, inter-step “hot spots” inherent in SMLC are measured and an empirical method to remove them is proposed. Another major MLC technique in IMRT, the dynamic multileaf collimator (DMLC) technique, has different characteristics from SMLC due to a different leaf operation mechanism during the irradiation of photon and electron beams. By using the BInS, the actual delivered doses by SMLC and DMLC techniques are measured and compared. Even if the planned dose to a target volume is equal in our experimental setting, the actual delivered dose by DMLC technique is measured to be larger by 14.8% than that by SMLC, and this is due to scattered photons and contaminant electrons at d$_{max}$.

• Plant Breeding and Biotechnology
• /
• v.7 no.3
• /
• pp.186-199
• /
• 2019

We selected 68 Chinese maize inbred lines to understand the genetic diversity, population structure, and marker-trait associations for eight agronomic traits and 50 simple sequence repeats (SSRs) markers. In this study, effective traits, such as days of anthesis (DA), days of silking (DS), ear height (EH), plant to ear height ratio (ER), plant height (PH), and leaf width (LW) were divided into PC1 and PC2 by PCA analysis for maize inbred lines. Genetic diversity analysis revealed a total of 506 alleles at 50 SSR loci. The mean number of alleles per locus was 10.12. The averages of genetic diversity (GD) and polymorphic information content (PIC) values were 0.771 and 0.743, respectively. Based on a membership probability threshold of 0.80, the population structure revealed that the total inbred lines were divided into three major groups with one admixed group. A marker-trait association using Q + K MLM showed that nine SSR markers (bnlg1017, umc2041, umc2400, bnlg105, umc1229, umc1250, umc1066, umc2092, and umc1426) were related with seven agronomic traits. Among these SSR markers, eight SSR markers were associated with only one agronomic trait (DA, DS, ER, LL, LW, PH, and ST), whereas one SSR marker (umc1229) was associated with two agronomic traits (DA and ST). These results will help in optimizing the choice of inbred lines for cross combinations, as well as in selecting markers for further maize breeding programs.

• Analytical Science and Technology
• /
• v.5 no.3
• /
• pp.249-261
• /
• 1992

Electrochemical behavior of the heavy lanthanide complexes of alizarin red S(ARS) has been investigated by d. c. polarography, differential pulse polarography and cyclic voltammetry. The reduction mechanism at a mercury electrode of alizarin red S as a complexing ligand showed a one step of two-electron transfer and the electron process is found to be reversible. Alizarin red S forms a 3:1 adsorptive complexes with lanthanides and the complexes are reduced via one step of two-elctron. The reduction potential of complex wave($P_2$) shifted more negatively than the ligand wave($P_1$). The linear calibration curves of the decreacing $P_1$ and increasing $P_2$ is obtained when the lanthanide concentration varies from $2.0{\times}10^{-6}M$ to $6.4{\times}10^{-5}M$ under the condition of pH 9.5, 0.1M LiCl and $1{\times}10^{-3}M$ ARS.

• Journal of Astronomy and Space Sciences
• /
• v.16 no.2
• /
• pp.241-254
• /
• 1999

Differential time-series observations of BL Camelopardalis classified as a double mode SX Phoenicis type variable were secured with a charge coupled device. The observed photometric data was reduced using the IRAF Package and the differential magnitudes were obtained through aperture photometry. The periods of BL Cam were analyzed with the Generalized Least-Square Method by Vanicek (1971) and the Fourier Decomposition Method. It was found that the first and second period of BL Cam were 0.0391 day respectively which lead the period ratio of P1/P0=0.81. This period ratio is much different from 0.78 determined by other investigators and also much more larger than that of other double-mode SX Phe type variables. In addition, this period ratio is much different from the value expected from the relation between the metallicity and period ratio. From these results, it can be confirmed that BL Cam is the most extreme case among all double-mode SX Phe type variables.