• 제목/요약/키워드: GBL

검색결과 35건 처리시간 0.018초

Polysulfone과 Poly(Phenylene Sulfide Sulfone)의 블록 공중합체를 이용한 양이온 교환막의 제조 및 전기화학적 특성 (Preparation of Cation Exchange Membrane using Block Copolymer of Polysulfone and Poly(Phenylene Sulfide Sulfone) and its Electrochemical Characteristics)

  • 임희찬;강안수
    • 멤브레인
    • /
    • 제10권2호
    • /
    • pp.66-74
    • /
    • 2000
  • In consideration that a high tensile strength and ion exchange capacity are maintained as the swelling of membrane is controlled by the coagulation of PSf with the introduction of ion exchange groups and PPSS without the introduction of ion exchange groups, the block copolymer of PSf and PPSS were synthesized. The cation exchange membrane was prepared by sulfonation with CSA and casted. The synthesized block copolymer and cation exchange membrane were characterized by FT-IR and their thermal stability was confirmed by TGA. The optimum sulfonation could be accomplished at a mole ratio of BPSf to CSA 1:3. The best electrochemical properties obtained by the optimal condition were area resistance of 4.37 $\Omega$$\textrm{cm}^2$, ion exchange capacity of 1.71 meq/g dry membrane, water content of 0.2941 g $H_2O$/g dry membrane, and fixed ion concentration of 5.81 meq/g $H_2O$. When GBL was used as an additive, area resistance was increased by 13.7 % and ion exchange capacity was increased by 14.6%. When the membrane was fabricated in a form of composite using non woven cloth as a support. the tensile strength of membrane could be improved, but the electrochemical characteristics were not influenced.

  • PDF

$(Sr_{0.85}{\cdot}Ca_{0.15})_mTiO_3$ 입계층 세라믹의 하전입자 거동 (Behavior of Charged Particles do $(Sr_{0.85}{\cdot}Ca_{0.15})_mTiO_3$ Grain Boundary Layer Ceramics)

  • 김진사;정동효;김상남;박재세;최운식;이준용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1995년도 추계학술대회 논문집
    • /
    • pp.209-212
    • /
    • 1995
  • In this paper, the $(Sr_{0.85}{\cdot}Ca_{0.15})TiO_3$ of paraelectric grain boundary layer (GBL) ceramics were fabricated. The characteristics of electrical conduction and the thermally stimulated current(TSC) were measured respectively. The region I below 200[V/cm] shows the ohmic conduction, the region II between 200[V/cm] and 1000[V/cm] can be explained by the Pool-Frenkel emission theory, and the region III above 2000[V/cm] is dominated by the tunneling effect. As a result, The origins of these peaks are that the ${\alpha}$ peak observed at $-20[^{\circ}C]$ looks like to be ascribed to the ionization excitation from donor level in the grain, and the ${\alpha}^{\prime}$ peak observed at $-20[^{\circ}C]$ appears to show up by detrap of the trapped carrier of border between the oxidation layer and the grain, and the ${\beta}$ peak observed at $80[^{\circ}C]$ seems to be resulted from hopping conduction of existing carrier in the trap site of the border between the oxidation and second phase.

  • PDF

Core Circuit Technologies for PN-Diode-Cell PRAM

  • Kang, Hee-Bok;Hong, Suk-Kyoung;Hong, Sung-Joo;Sung, Man-Young;Choi, Bok-Gil;Chung, Jin-Yong
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제8권2호
    • /
    • pp.128-133
    • /
    • 2008
  • Phase-change random access memory (PRAM) chip cell phase of amorphous state is rapidly changed to crystal state above 160 Celsius degree within several seconds during Infrared (IR) reflow. Thus, on-board programming method is considered for PRAM chip programming. We demonstrated the functional 512Mb PRAM with 90nm technology using several novel core circuits, such as metal-2 line based global row decoding scheme, PN-diode cells based BL discharge (BLDIS) scheme, and PMOS switch based column decoding scheme. The reverse-state standby current of each PRAM cell is near 10 pA range. The total leak current of 512Mb PRAM chip in standby mode on discharging state can be more than 5 mA. Thus in the proposed BLDIS control, all bitlines (BLs) are in floating state in standby mode, then in active mode, the activated BLs are discharged to low level in the early timing of the active period by the short pulse BLDIS control timing operation. In the conventional sense amplifier, the simultaneous switching activation timing operation invokes the large coupling noise between the VSAREF node and the inner amplification nodes of the sense amplifiers. The coupling noise at VSAREF degrades the sensing voltage margin of the conventional sense amplifier. The merit of the proposed sense amplifier is almost removing the coupling noise at VSAREF from sharing with other sense amplifiers.

로제 카이와(R.Caillois)의 놀이 유형에 근거한 유아용 한글 기능성 모바일 게임 연구 (A study on Hangul serious mobile game for Infant based on R. Caillois's theory)

  • 이수연;김재웅
    • 만화애니메이션 연구
    • /
    • 통권35호
    • /
    • pp.291-312
    • /
    • 2014
  • 본 연구는 놀이를 학문적인 관점으로 승화시킨 로제 카이와 (R.Caillois)의 이론을 기반으로 유아의 한글 학습의 동기부여를 위한 재미 요소를 찾아보는 것으로부터 시작한다. 놀이의 궁극적 목적에는 즐거움이 수반되어야 한다. 그리고 학습은 개인의 경험에 의한 영구적인 변화를 의미하는데, 놀이와 학습, 이 두 가지 요소는 융합을 통해 교육용 기능성 게임을 연구하는 게임 기반 학습 이론 GBL(game based learning)의 중요한 요소이다. 유아가 한글 학습을 하면서 스스로 목표를 달성하기 위해서 무엇보다 중요한 것은 재미이다. 유아는 성인에 비해 집중력이 낮기 때문에 몰입을 위해 재미를 학습과 결부시키는 것은 매우 중요하다. 따라서 본 연구는 먼저 효과적인 놀이 특성 요소가 적용된 한글 기능성 모바일 게임 사례를 분석을 통해 알아보고자 하였다. 사례의 선정 기준으로는 사용자의 선호도를 기준삼아, 2014년 4월 22일을 시점으로 구글 안드로이드 마켓의 유아용 한글 기능성 모바일 게임 영역에서 10000개 이상 다운로드 한 게임을 토대로 다운로드 횟수와 사용자의 평가 별점에 따라 20개의 한글 모바일 기능성 게임을 선정하였다. 현재 시중에 출시되어 있는 다양한 유아용 한글 학습 놀이 콘텐츠의 사례를 R.Caillois가 제안하는 놀이의 네 가지 분류와 속성의 선행연구를 통해 아곤(Agon), 미미크리(Mimicry), 일레아(Alea), 일링크스(Ilinx)로 분석하고 그 고유의 특성과 비교하였다. 그 특성 네 가지가 한글 기능성 모바일 게임 안에서 어떠한 역할을 수행하는 지 살펴 본 결과, 선정된 사례 중 게임의 규칙과 의지가 최대로 포함된 아곤(Agon)의 유형이 가장 많은 분포를 보였으며, 각각 하나의 놀이 요소가 적용된 것보다는 네가지 놀이 특성이 고루 분포된 경우에서 유희성과 함께 높은 몰입도를 경험하게 해 주었다. 본 연구 결과를 통해 유아용 한글 기능성 모바일 게임 콘텐츠가 놀이의 속성이 반영된 재미의 요소를 학습에 접목하는 기반연구가 되길 기대한다.

숯 포장재가 백미, 현미, 흑미 저장 중 물리화학적 변화에 미치는 영향 (Effect of Charcoal Packaging Materials on the Physicochemical Properties of White, Brown and Black Rice During Storage)

  • 정남용;최성숙;최순남
    • 한국식품조리과학회지
    • /
    • 제20권6호
    • /
    • pp.553-560
    • /
    • 2004
  • 백미, 현미, 흑미를 각각 일반포장재와 숯포장재에 일정기간 저장하면서 저장기간 중 물리화학적 특성의 변화에 미치는 영향을 비교, 조사하여 곡류저장에 대한 숯포장재의 활용성을 알아보고자 하였으며 그 결과는 다음과 같다. 1. 저장 중 무게의 변화는 전반적으로 쌀의 종류 및 포장재간의 차이에 상관없이 저장기간이 경과함에 따라 감소하는 경향을 보였으며 일반포장재와 숯포장재에 따라 $100.0\%$에서 백미군은 각각 $97.0,\;97.0\%$, 현미군은 각각 $97.5,\;97.6\%$, 흑미군은 각각 $97.6,\;97.8\%$로 나타났고 포장재간의 차이는 미미하였다. 저장 쌀의 발아율을 측정한 결과 백미군의 경우 모두 $0.0\%$의 발아율을 나타내었고, 저장 4주 후 일반포장재와 숯포장재에 따라 현미군에서 각각 $71.0,\;70.0\%$, 흑미군에서는 각각 $70.0,\;70.5\%$의 발아율을 보였으며, 저장 10주 후에는 현미군에서 각각 $10.3,\;10.9\%$, 흑미군에서는 각각 $11.8,\;12.1\%$이었고 저장 16주 후에는 모든 군에서 $0.0\%$이었고 포장재간의 차이는 나타나지 않았다. 2. 수화양상 실험결과 실험 초기에 백미는 4시간, 현미는 8시간, 흑미는 12시간 이후에 평형수분함량에 도달하여 백미는 $26.4\%$, 현미는 $25.9\%$, 흑미는 $37.8\%$의 수분증가량을 보였다. 실험군 모두 저장기간이 길수록 수화정도는 증가하였으며 포장재간의 차이는 나타나지 않았다. 3. 저장기간에 따른 경도는 실험 초기 백미 5.430, 현미 7.448, 흑미 7.822 kg이었으나 저장 16주 후에는 흑미 숯포장재군이 가장 적게 변하여 실험초기와 실험 후 경도의 차이는 1.790 kg, 백미 일반포장재군은 가장 많이 변하여 2.702 kg으로 각군마다 유의적인 차이를 나타내었다(p<0.001). 또한 포장재간에 따른 경도는 16주 경과 시료의 경우 일반포장재와 숯포장재군에 따라 백미에서는 각각 8.132, 8.114, 현미에서는 9.696, 9.347, 흑미는 10.026, 9.612 kg로 일반포장재군 시료보다 숯포장재군 시료의 경도가 낮은 것으로 나타났다. (p<0.05). 4. 지방산도는 모든군에서 저장기간이 경과함에 따라 유의적으로 증가하였고(p<0.001), 일반포장재군보다 숯포장재군의 지방산도가 유의적(백미, 현미군 p<0.001, 흑미군 p<0.01)으로 낮았으나 숯포장재군 시료의 경우에서도 저장기간이 경과함에 따라 지방산도가 증가하는 결과를 보였다. 원료 상태 시료의 총균수는 g당 $10^5$ 이상으로 높게 나타났으며 저장기간에 따라 큰 변화가 없다가 16주 후에는 현미 숯포장재군을 제외하고는 총균수가 감소되는 경향을 보였으며 일반포장재군와 숯포장재군의 시료에서 총균수가 비슷하게 조사되었다. 따라서 본 실험을 통해 숯포장재가 물리화학적 성질에 있어 일반 종이포장재보다 우수한 결과는 관찰되지 않았다. 그러나 숯포장재 제조 시 숯의 기능성을 저하시킬 수 있는 요인 및 제조 방법 등을 개선함으로써 숯의 기능성과 친환경적 특성을 최대한 살린 포장재의 연구 개발이 필요할 것으로 사료된다.