• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.116-116
• /
• 2020

Gilgit-Baltistan (GB) is a highly mountainous and remote region covering 45% of Upper Indus Basin (UIB) with around 1.8 million population is vulnerable to climate change and socio-economic growth makes water resources management and planning more complex. To understand the water scarcity in the region this study is carried out to project water supply and demand for agricultural and domestic sector under various climate-socio-economic scenarios in five sub catchments of GB i.e., Astore, Gilgit, Hunza, Shigar and Shyok for a period of 2015 to 2050 using Water Evaluation and Planning (WEAP) model. For climate change scenario ensembled mean of three global climate models (GCMs) was used under three different Representative Concentration Pathway (RCP) scenarios (RCP2.6, RCP6.0 and RCP8.5). The Shared Socioeconomic Pathways (SSPs) and agricultural Land Development (LD) scenarios were combined with climate scenarios to develop climate-socio-economic scenario. Our results indicate that the climate change and socio-economic growth would create a gap between supply and demand of water in the region, with socio-economic growth (e.g. agricultural and population) as dominant external factor that would reduce food production and increase poverty level in the region. Among five catchments only Astore and Gilgit will face shortfall of water while Shyoke would face shortfall of water only under agricultural growth scenarios. We also observed that the shortfall of water in response to climate-socio-economic scenarios is totally different over two water deficient catchments due to its demography and geography. Finally, to help policy makers in developing regional water resources and management policies we classified five sub catchments of UIB according to its water deficiency level.

• Computers and Concrete
• /
• v.20 no.2
• /
• pp.129-143
• /
• 2017

Seismic design of reinforced concrete (RC) structures requires a certain minimum level of flexural ductility. For example, Eurocode EN1998-1 directly specifies a minimum flexural ductility for RC beams, while Chinese code GB50011 limits the equivalent rectangular stress block depth ratio at peak resisting moment to achieve a certain nominal minimum flexural ductility indirectly. Although confinement is effective in improving the ductility of RC beams, most design codes do not provide any guidelines due to the lack of a suitable theory. In this study, the confinement for desirable flexural ductility performance of both normal- and high-strength concrete beams is evaluated based on a rigorous full-range moment-curvature analysis. An effective strategy is proposed for flexural ductility design of RC beams taking into account confinement. The key parameters considered include the maximum difference of tension and compression reinforcement ratios, and maximum neutral axis depth ratio at peak resisting moment. Empirical formulae and tables are then developed to provide guidelines accordingly.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.220-227
• /
• 2012

The case company has driven the six sigma innovation programme company wide for the last seven years without any stop in spite of the CEO change. There was neither any benchmark nor the sufficient number of internal experts during the initial stage of driving six sigma. However, the company raised a lot of innovation experts such as MBB, BB and GB, thereby successfully changed the way of employees' doing work and reaped an enormous amount of either visible or invisible performances as a result of implementing the six sigma innovation programme. This paper deals with both main activities undertaken at each stage of the innovation life cycle of six sigma and their performances in a ICT (Information Communication Technology) industry. The performances are described from the four aspects of a balanced score card (BSC) and finally some strategic implications suggested.

• Annual Conference of KIPS
• /
• 2010.11a
• /
• pp.973-974
• /
• 2010

본 논문에서는 XFP(10 Gb/s Small Form Factor Pluggable) 트랜시버 모듈의 정확한 데이터 전송을 위해 저전력 FEC를 설계하였다. 현재 많이 사용되며 버스트 에러에 강한 Reed-solomon코드를 구현하고 코드의 분산 연산을 통해 저전력 RS코드를 구현하였다. 본 논문에서 제안한 코드는 기존의 RS코드 대비 20% 면적이 감소하는 것을 확인할 수 있었으며, 또한 전력소모가 10% 감소되는 것을 확인 할 수 있었다.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.2
• /
• pp.27-49
• /
• 2009

Objectives : The purpose of this study was to investigate the effects of Yanghyuljanggeungunbo-tang(Yangxuezhuangjinjianbu-tang) and Cervi Cornu Parvum pharmaco-acupuncture in Spinal Cord Injury(SCI)-induced rats. Methods : The subjects were divided into 5 groups ; Normal, Control no treatment after SCI, Experimental I taken with Yanghyuljanggeungunbo-tang (Yangxuezhuangjinjianbu-tang) 500 mg/kg $0.5m{\ell}$ daily after inducing SCI. Experimental II taken with Cervi Cornu Parvum pharmaco-acupuncture at Taegye(KI3) and $Yangnungch{\acute{o}}n$(GB34) after inducing SCI and Experimental III taken with Yanghyuljanggeungunbo-tang(Yangxuezhuangjinjianbu-tang) 500 mg/kg $0.5m{\ell}$ and Cervi Cornu Parvum pharmaco-acupuncture at KI3 and GB34 to SCI-induced rats. After each operation, the present author observed the motor behavior recovery and nerve regeneration by analysis of the motor behavior tests, EMG, hematological(AST, ALT, WBC), histological and immunological changes. Rats were tested at modified Tarlov test at the 1st, 2nd, 3rd, 4th day, and Motor behavior test at 1st, 3rd, 7th, 14th, 21st day. Results : Results are as follows. 1. All the experimental groups were improved compared with control group in the motor behavior tests including Tarlov test, Basso-Beattle-Bresnahan locomotor rating scale, modified inclined plane test, open field test, grid walk test and narrow beam test. Especially Experimental III was improved significantly among other groups. 2. In EMG test, H wave appeared weak only in Experimental III. And M wave was increased significantly in Experimental III. 3. All the experimental groups were significantly decreased compared with control group in serum AST, serum ALT and serum WBC tests. 4. significantly decreased in Tumor Necrosis Factor-${\alpha}$ test compared with the first day of SCI. 5. Muscle contraction and denaturation of all the experimental groups were inhibited in histological observations of gastrocnemius muscle. Especially, those of experimental III was more effective. 6. NGF and BDNF of spinal cord gray matter in all the experimental groups were increased compared with control group. Especially, those of experimental III was more effective. Conclusions : As above, it can be suggested that Yanghyuljanggeungunbo-tang(Yangxuezhuangjinjianbu-tang) and Cervi Cornu Parvum pharmaco-acupuncture may improve motor behavior, EMG, hematological, histological and immunological findings in Spinal Cord Injury(SCI)-induced rats. Especially, effects will be somewhat better in combination of these two treatments.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.58-73
• /
• 2006

The purpose of this study was to improve of fittness and coverage rate of exporting domestic clothing to China for Chinese Adult Female. For study, It was measured 1381 female women aged between 19 and 50 who resident in Beijing and Shanghai in China. as a sample, 1360 female women was seleted for development of apparel sizing system. As for the method of this study was made of 111 items by indirect measures done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis, correlation analysis, factor analysis, ANOVA(t-test and F-test), duncan's multiple test. The result was as follows: Chinese Adult women's constitutional components determined by factor analysis, six components could be identified: factor 1:constitutional obesty and width size, factor 2: longistudinal body size, factor 3: shoulder form and size, factor 4: longistudinal upper body size, factor 5: under body size, factor 6: shoulder dropping. According to the Women's Wear Specifications(GB/T 1335.2-1997) by drop, body types of Chinese Adult female was classified into six types, it was Y, A, B, C and Z, D. In order, A type as standard somatotype(49.8%), B type(26.9%), Y type (18.8%), C type(2.9%). Y type had the average height and shoulder, bust girth. They were slimmer in overall terms. A type had a normal obesity and body size in height, shoulder, bust girth. They were average Chinese Women. B type had a smaller then A type. They were more obes and thick waist girth. C type had the highest obesity, the widest shoulder and bust girth, and thick waist girth. The characteristics of each body type following the body type structure factor are Y-type for slender type, A-type for standard type, B-type for slightly large type, and C-type for obese type. For each region, the Beijing area had in the order of A-type, Y-type, B-type and C-type, and the Shanghai area had in the order of A-type, B-type, Y-type and C-type.

• Earthquakes and Structures
• /
• v.3 no.5
• /
• pp.719-747
• /
• 2012

In this paper a novel approach is proposed to address the problem of deriving non-stationary stochastic processes which are compatible in the mean sense with a given (target) response (uniform hazard) spectrum (UHS) as commonly desired in the aseismic structural design regulated by contemporary codes of practice. The appealing feature of the approach is that it is non-iterative and "one-step". This is accomplished by solving a standard over-determined minimization problem in conjunction with appropriate median peak factors. These factors are determined by a plethora of reported new Monte Carlo studies which on their own possess considerable stochastic dynamics merit. In the proposed approach, generation and treatment of samples of the processes individually on a deterministic basis is not required as is the case with the various "two-step" approaches found in the literature addressing the herein considered task. The applicability and usefulness of the approach is demonstrated by furnishing extensive numerical data associated with the elastic design UHS of the current European (EC8) and the Chinese (GB 50011) aseismic code provisions. Purposely, simple and thus attractive from a practical viewpoint, uniformly modulated processes assuming either the Kanai-Tajimi (K-T) or the Clough-Penzien (C-P) spectral form are employed. The Monte Carlo studies yield damping and duration dependent median peak factor spectra, given in a polynomial form, associated with the first passage problem for UHS compatible K-T and C-P uniformly modulated stochastic processes. Hopefully, the herein derived stochastic processes and median peak factor spectra can be used to facilitate the aseismic design of structures regulated by contemporary code provisions in a Monte Carlo simulation-based or stochastic dynamics-based context of analysis.

• Earthquakes and Structures
• /
• v.3 no.3_4
• /
• pp.581-609
• /
• 2012

In this paper a novel non-iterative approach is proposed to address the problem of deriving non-stationary stochastic processes which are compatible in the mean sense with a given (target) response (uniform hazard) spectrum (UHS) as commonly desired in the aseismic structural design regulated by contemporary codes of practice. This is accomplished by solving a standard over-determined minimization problem in conjunction with appropriate median peak factors. These factors are determined by a plethora of reported new Monte Carlo studies which on their own possess considerable stochastic dynamics merit. In the proposed approach, generation and treatment of samples of the processes individually on a deterministic basis is not required as is the case with the various approaches found in the literature addressing the herein considered task. The applicability and usefulness of the approach is demonstrated by furnishing extensive numerical data associated with the elastic design UHS of the current European (EC8) and the Chinese (GB 50011) aseismic code provisions. Purposely, simple and thus attractive from a practical viewpoint, uniformly modulated processes assuming either the Kanai-Tajimi (K-T) or the Clough-Penzien (C-P) spectral form are employed. The Monte Carlo studies yield damping and duration dependent median peak factor spectra, given in a polynomial form, associated with the first passage problem for UHS compatible K-T and C-P uniformly modulated stochastic processes. Hopefully, the herein derived stochastic processes and median peak factor spectra can be used to facilitate the aseismic design of structures regulated by contemporary code provisions in a Monte Carlo simulation-based or stochastic dynamics-based context of analysis.

• Natural Product Sciences
• /
• v.20 no.4
• /
• pp.232-236
• /
• 2014

Acanthopanax divaricatus var. albeofructus (ADA) is commonly ingested as a traditional medicine or as a component of a health drink in Korea. In this phytochemical study, nine phenolics (1 - 9) and three lignans (10 - 12) were isolated from the MeOH extract of the stems of ADA. Chemical structures were elucidated by comparing spectroscopic data with reported values. Nuclear factor kappa B ($NF-{\kappa}B$) inhibitory activity of the isolated compounds was evaluated using an $NF-{\kappa}B$ luciferase assay in HepG2 cells. Among them, compounds 1, 3 - 8, and 11 showed significant inhibitory effects on $TNF{\alpha}$-induced $NF-{\kappa}B$ transcriptional activity in a dosedependent manner, with $IC_{50}$ values ranging from 13.25 to $37.36{\mu}M$. Further studies on potential anti-inflammatory effects and the benefits of phenolic and lignan components from ADA are warranted.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.310-314
• /
• 2016

Background: FCTC10 container is designed to transport $^{60}Co$ radioactive sources used in irradiation industry. It belongs to Type B(U) Category III (yellow) package when being loaded with a $^{60}Co$ source of $1.8{\times}10^5$ Ci. Materials and Methods: The container is constituted of shielding container, basket, protective cover and bracket. Shielding ability is provided mainly by stainless steel shells, tungsten alloy and lead among steel shells. Radiation level around the container has been calculated with both Monte Carlo simulations and measurements. Results and Discussion: It is proven that the shielding performance of the container fulfills the requirements in GB11806-2004 (Regulations for the safe transport of radioactive material, China Standard Press). Exposure doses to workers and to critical groups of public were calculated based on hypothetical exposure scene according to transport practice experience. Conclusion: The results show that doses to workers and public are less than the constraint dose considered in design, and the radiation level would be increased less than a factor of 2 under design basis accidents.