• 설비공학논문집
• /
• 제7권3호
• /
• pp.488-500
• /
• 1995

An air-cooled ammonia/water GAX(Generator-Absorber heat eXchange) absorption cooling cycle is proposed and its performance is numerically evaluated. It is shown that the performance of the system is greatly dependent on the quality of the refrigerant leaving the evaporator. For any refrigerant concentration in the investigated range(99.1~99.9% ammonia), the cycle COP(coefficient of performance) reaches the highest value, when some amount(about 7%) of refrigerant evaporates in the refrigerant heat exchanger. Among temperature differences in various heat exchangers, the temperature difference between GAX-absorber and the GAX-generator shows the greatest effect on the system performance, whereas pressure losses cause no significant decrease in COP. The system COP increases almost linearly with increasing evaporator temperature, decreasing absorber temperature or decreasing condenser temperature. If both absorber and condenser temperature increase simultaneously, the decrease in the COP becomes larger.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.444-444
• /
• 2013

변형 다중양자우물은 전자 소자와 광전자 소자에 응용할 수 있는 가능성 때문에 연구가 많이 진행되고 있다. 합성 물질들의 초격자를 연속적으로 증착, 성장하는 디지털 합금은 다중양자우물을 활용한 광전자 소자에서 응용가치가 상당히 높다. 현재 디지털 합금을 이용한 다중양자우물의 성장과 관련한 연구가 활발히 진행되고 있고, 특히 InzGaxAl1-z-xP/InAlP 다중양자우물은 광전자 소자로서의 응용가치가 부각되고 있다. 그러나 InzGaxAl1-z-xP/InAlP 다중양자우물의 성장 및 광학적 성질에 대한 연구는 많이 진행되었으나, InzGaxAl1-z-xP/InAlP 다중양자우물에서의 변형효과를 고려한 전자적 성질에 대한 연구는 미흡하다. InzGaxAl1-z-xP/InAlP 다중양자우물에 대한 전자적 성질의 연구는 광소자의 성능 향상을 위해 매우 필요하다. 본 연구에서는 디지털 합금 성장 방법으로 형성한 InzGaxAl1-z-xP/InAlP 다중양자우물의 부띠 사이 천이와 전자 분포를 고찰하였다. 온도에 따른 광루미네센스의 측정을 통해 InzGaxAl1-z-xP/InAlP 다중양자우물에서 나타나는 부띠 사이의 천이를 관찰하였다. 가변 메시 유한 차분법을 이용한 이산적 모델을 통해 변형효과가 다중양자우물 구조에서 부띠에 주는 영향을 조사하였다. 격자의 불일치로 인한 변형 효과와 8-band envelope function approximation을 고려한 슈뢰딩거 방정식을 사용하여 InzGaxAl1-z-xP/InAlP 다중양자우물에서의 전자 부띠 에너지와 에너지 파동 함수를 계산하였다. 계산한 부띠 사이 천이 에너지와 광루미네센스 측정에서 보인 엑시톤 천이 에너지를 비교하였을 때, 작은 차이 값이 나타났다. 증착과정에서의 이종접합사이에서 발생하는 불확실성을 고려한다면 이 차이 값은 오차범위 안에 포함되며, 계산 값과 실험 값이 잘 일치하는 것으로 볼 수 있다.

• 설비공학논문집
• /
• 제11권4호
• /
• pp.431-439
• /
• 1999

A generator-GAX combined rectification system of an ammonia absorption heat pump was investigated to get the optimum design values. The mass and heat transfer phenomena of the rectification system were analysed. The number of column plates, equilibrium temperature of solution on each plate and flow rates of solution and vapor generated were predicted. The characteristics of mass and heat transfer of the generator-GAX combined rectification system, i.e. concentration difference of leaving solution and vapor on each column plate, were found to be mainly governed by the pressure of generator, reflex ratio and temperature difference of analyser coolant. The number of rectification column plates for each different pressure in generator was obtained. The optimum locations for installing the feeder from solution-cooled absorber and GAX desorber in generator were predicted. The improvement of COP was followed by the increase of the rectifier efficiency and the number of column plate, and the decrease of reflex ratio.

• 설비공학논문집
• /
• 제13권10호
• /
• pp.923-929
• /
• 2001

The objectives of this paper are to develop an advanced GAX cycle named HGAX (Hybrid Generator Absorber heat eXchange) cycle, and to study the effect of key pa-rameters on the cycle performance and the evaporating temperature. Two different HGAX cycles are developed-Type A (Performance improvement) and Type B (Low temperature applications). A compressor is placed between the evaporator and the absorber, and the evaporator pressure and the absorber pressure are controlled according to its application purpose. It was found that the COP could be improved by 24% compared with the conventional GAX cycle and the evaporating temperature as low as -8$0^{\circ}C$ could be obtained from the HGAX cycle.

• 설비공학논문집
• /
• 제14권2호
• /
• pp.127-133
• /
• 2002

The objectives of this paper are to develop an advanced GAX cycle named HGAX (Hybrid Generator Absorber heat exchanger) cycle, and to study the effect of key parameters on the cycle performance and the hot-water temperature from the condenser. New types of the HGAX cycle are developed by adding a compressor between the generator and the condenser- Type C (performance improvement and reduction of the generator temperature) and Type D (Hot-water temperature application). The solution temperature in the generator outlet is reduced to 168$^{\circ}C$ with the COP improvement of 19% compared to the standard GAX cycle. The hot-water temperature from the condenser is raised to 106$^{\circ}C$ for panel heating (Ondol heating) application.

• 설비공학논문집
• /
• 제12권1호
• /
• pp.102-111
• /
• 2000

A numerical model which simulates the simultaneous heat and mass transfer within a vertical tube GAX absorber was developed. The ammonia vapor and the solution liquid are in counter-current flow, and the hydronic fluid flows counter to the solution liquid. The film thickness and the velocity distribution of the liquid film were obtained by matching the shear stress at the liquid-vapor interface. Two-dimensional diffusion and energy equations were solved in the liquid film to give the temperature and concentration, and a modified Colburn-Drew analysis was used for the vapor phase to determine the heat and mass fluxes at the liquid-vapor interface. The model was applied to a GAX absorber to investigate the absorption rates, temperature and concentration profiles, and mass flow rates of liquid and vapor phases. It was shown that the mass flux of water was negligible compared with that of ammonia except the region near the liquid inlet. Ammonia absorption rate increases rapidly near the liquid inlet and decrease slowly. Both the absorption rate of ammonia vapor and the desorption rate of water near the liquid inlet increase as the vapor mass flow rate increases, but the mass fluxes of the ammonia and the water near the liquid outlet decrease as the mass flow rate of the vapor increases.

• 한국진공학회지
• /
• 제3권3호
• /
• pp.346-354
• /
• 1994

삼원화합물 반도체 CuAlSe2 및 CuGaSe2 단결정의 solid solution 인 CuAl1-xGaxSe2 및 cobalt를 2.0 mol% 첨가한 CuAl1-xGaxSe2 : Co2+ 단결정을 iodine을 수송물질로 사용한 화학수송법으로 성장시켰 다. source material로는 CuAl1-xGaxSe2 의 화학조성비에서 Se를 3.0mol% 과잉으로 첨가하여 합성한 ingot를 사용하였으며 불순물이 첨가된 CuAl1-xGaxSe2:Co2+ 단결정성장시에는 source ma-terial 에 cobalt 분말을 2.0mol% 첨가하였다. X-선 회절무늬로부터 성장된 단결정들이 chalcopyrite 결정구조를 하고 있음을 확인하였으며 격자상수를 구하였다. 광흡수 spectra 측정으로부터 성장된 단결정에서 나타 는 cobalt 불순물에 의한 광흡수 peak가 Td 대칭점에위치한 Co2+ 이온의 에너지 준위들간 전자전이에 의해 나타남을 규명하였다.

• 대한설비공학회지:설비저널
• /
• 제27권1호
• /
• pp.53-74
• /
• 1998

• Journal of Microbiology and Biotechnology
• /
• 제32권4호
• /
• pp.430-436
• /
• 2022

Platycosides, Platycodi radix (Platycodon grandiflorus root) saponins, are used as food supplements and exert diverse pharmacological activities. Deglycosylation of saponins enhances their biological efficacy, and deglycosylated platycosides are produced mainly through enzymatic hydrolysis. However, the types of available deglycosylated platycosides remain limited because of a lack of hydrolyzing enzymes that can act on specific glycosides in glycosylated platycosides. In this study, a crude enzyme from Aspergillus tubingensis converted platycoside E (PE) and polygalacin D₃ (PGD3) into deglucose-apiose-xylosylated (deGAX)-platycodin D (PD) and deGAX-polygalacin D (PGD), respectively. The products were identified through LC/MS analysis by specifically hydrolyzing all glucose residues at C-3, and apiose and xylose residues at C-28 of platycoside. The hydrolytic activity of the crude enzyme obtained after the cultivation of the fungus using citrus pectin and corn steep solid as carbon and nitrogen sources, respectively, in culture medium was increased compared with those using other carbon and nitrogen sources. The crude enzyme from A. tubingensis was the most effective in producing deGAX platycoside at pH 5.0 and 60℃. The crude enzyme produced 0.32 mg/ml deGAX-PD and 0.34 mg/ml deGAX-PGD from 1 mg/ml PE and 1 mg/ml PGD3 (at pH 5.0 and 60℃) for 12 and 10 h, with productivities of 32.0 and 42.5 mg/l/h and molar yields of 62.1 and 59.6%, respectively. To the best of our knowledge, this is the first study to produce deGAX platycosides from glycosylated platycosides.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 동계학술발표대회 논문집
• /
• pp.4-4
• /
• 2006