• The Korean Journal of Pesticide Science
• /
• v.19 no.4
• /
• pp.354-360
• /
• 2015

In recent years, Allium victorialis has been extensively used as a pharmacological agent for various diseases in the form of anti-arteriosclerotic, anti-diabetic and anti-cancer. Allium victorialis is severely affected by various fungal diseases since it naturally grow in the shady and humid environments in Korea. In this case, different types of fungicides are applied to control the fungal diseases in Allium victorialis. The present study was aimed to determine the residual characteristics of two fungicides namely tebuconazole and fludioxonil on Allium victorialis. For this study, the fungicides were drenched soil on Allium victorialis in the cultivation area Pyeongchang by the standard (two thousand fold) and double (thousand fold) dilutions. At the end of $15^{th}$, $30^{th}$ and $40^{th}$ days samples were collected for residue analysis. Residues of tebuconazole and fludioxonil were analyzed using GC/NPD (Gas Chromatography/Nitrogen Phosphorus Detector) and their recovery were found to be 108.8~119.5% and 91.3~104.8%, respectively. The method of limits of quantification for both fungicides was $0.01mg\;kg^{-1}$. Further, the results of this study shows that the residue levels of both fungicides on Allium victorialis were <$0.01{\sim}0.12mg\;kg^{-1}$ and $0.01{\sim}0.09mg\;kg^{-1}$ and their % ADI (% Acceptable Daily Intake) were 17.44% and 25.75%, respectively. Based on the results obtained in this study, we suggest that the residue levels of both of the fungicides on Allium victorialis are safe and these fungicides can also be used to control fungal diseases in Allium victorialis.

• Korean Journal of Food Science and Technology
• /
• v.47 no.5
• /
• pp.673-679
• /
• 2015

In vitro antioxidant activities and neuronal cell protective effects of the ethyl acetate fraction of a new green extract (Brassica oleracea var. botytis aut italiana) against $H_2O_2$-induced oxidative stress were investigated, and its industrial feasibility was evaluated. The extract showed the highest contents of total phenolic compounds among other extracts as well as a 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt (ABTS) radical scavenging activity and malondialdehyde (MDA) inhibitory effect. This extract not only decreased the intracellular reactive oxygen (ROS) level but also protected the neuronal cells against $H_2O_2$-induced oxidative stress. On analysis using gas chromatograph-mass spectrometry, the following phenolic compounds were identified: quinic acid, ferulic acid, and caffeic acid. Collectively, these results suggest that this new green extract could contain functional substances that would help prevent the risk of neurodegenerative disease.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.243-248
• /
• 2011

A selective determination method of mercury (II) ion in aqueous solution by luminol-based chemiluminescence system (luminol CL system) has been developed. Determination of metal ions such as copper (II), iron (III), chromium (III) ion in solution by the luminol CL system using its catalytic role in the reaction of luminol and hydrogen peroxide has been reported by several groups. In this study, the catalytic activity of mercury (II) ion in the reaction of luminol and hydrogen peroxide was observed by the enhanced CL intensity of the luminol CL system. Based on this phenomenon, experimental conditions of the luminol CL system were investigated and optimized to determine mercury (II) ion in aqueous solution. While mercury (II) ion in mixed sample solution containing mercury (I) and (II) ions highly enhanced the CL intensity of the luminol CL system, the mercury (I) ion could not enhanced the CL intensity. Thus selective determination of the mercury (II) ions in a mixture containing mercury (I) and (II) ions could be achieved. Each concentration of mercury (I) and (II) ions in aqueous solution can be obtained from the results of the CL method that give the concentration of only mercury (II) ion and the inductively coupled plasma (ICP) method that give the total concentration of mercury ions. On the optimized conditions, the calibration curve of mercury (II) ion was linear over the range from $1.25{\times}10^{-5}$ to $2.50{\times}10^{-3}M$ with correlation coefficient of 0.991. The detection limit of mercury (II) ion in aqueous solution was calculated to be $1.25{\times}10^{-7}M$.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.667-675
• /
• 2018

Increasing emissions regulations and demand of high-efficiency cars that travels a lot of distance with less fuel, there is growing interest in Energy Consumption Efficiency. Korean energy consumption efficiency compute combined Fuel Economy by driven city & highway driving mode and present final Energy Consumption Efficiency as using 5-cycle correction formula. Energy consumption efficiency is computed Carbon-balance-method, when used burning fuel play a key role in vehicle performance & Energy Consumption Efficiency. In Korea, vehicle fuel is circulate by Petroleum and Petroleum Alternative Business Act, there is property difference in quality standard because petroleum sector's refine method or type of crude oil. It does not appear a big difference according to fuel, because it sets steady quality standard, it may affect the performance of automobile. Thus, in research We purchase a few diesel fuel which circulated in the market in summer season though directly-managed-gas station by petroleum sector, resolve property each of fuel, we compute Fuel Economy each of them. We analyze into change depend on applying for property as nowadays utilizing Energy Consumption Efficiency calculating formula of gasoline and diesel fuel. As result, Density each of sample fuel has a maximum difference roughly 0.9%, net heat value each of sample fuel has difference 1.6%, result of current Energy Consumption Efficiency each of sample fuel has a difference roughly 1% at city drive mode, 1.4% at highway drive mode. Result of use gasoline calculator formula shows less 6% result than nowadays utilizing Energy Consumption Efficiency calculating formula, each of sample's Energy Consumption Efficiency shows maximum roughly 1.4% result in city & highway drive mode.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.1
• /
• pp.1-6
• /
• 1981

In this study, sesame oil was chosen as the experimental sample and analysed for its triglyceride composition by high-performance liquid chromatography(HPLC) in combination with gas liquid chromatography(GLC). The triglycerides were separated from sesame oil by liquid chromatographies on Bio-Beads SX-2 and on Sephadex LH-20, and fractionated into five groups on the basis of their partition numbers by reverse phase HPLC on a column packed with $\mu-Bondapak$ C18 using methanol-chloroform mix-ture as a solvent. Each of these collected fractions gave one to three peaks in the GLC chromatograms according to the acyl carbon number of the triglyceride, and fatty acid composition of the triglyceride was also analysed by GLC. From the results, it was found that the sesame oil consists with twenty one kinds of triglyceri-des, and the major triglycerides of sesame oil are those of $(2\;{\times}\;C18:1,\;C18:2\;;\;17.1\%),\;(C18:1,\;2{\times}C18:2\;;\;17.0\%),$ $(3\;{\times}\;C18:2\;;\;17.0\%),\;(3\;{\times}\;C18:1\;;\;10.9\%),$ $(3\;{\times}\;C18:2\;;\;9.6\%),\;(C16:0,\;C18:1,C18:2\;;\;7.9\%),$ $(C16:0,\;2\;{\times}\;C18:1\;;\;7.4\%),\;(C16:0,\;2\;{\times}\;C18:2\;;\;6.8\%),$ $(C18:0,\;C18:1,\;C18:2\;;\;3.1\%),\;(2\;{\times}\;C18:0,\;C18:2\;;\;1.5\%)$ $(C18:0,\;2\;{\times}\;C18:1\;;\;1.4\%),\;(C16:0,\;C18:0,\;C18:1\;;\;1.3\%),$ $(2\;{\times}\;C16:0,\;C18:1\;;\;1.2\%),\;and\;(C16:0,C18:0,\;C18:2\;;\;1.0\%)$.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.27-38
• /
• 2009

To investigate the feasibility of refuse derived fuels (RDFs) combined of sewage sludge and combustible wastes such as substitutive fuels instead of a stone coal, several different RDFs made with different mixtures of sewage sludge and combustible wastes were analyzed by various experiments. The combustion characteristics for the RDFs were investigated by analyzing fuel gases, and heating values were also measured by a bomb calorimeter. The fundamental properties such as moisture contents, ratios of combustible materials, amounts of ashes, heavy metals, ratios of each chemical elements and heating values were analyzed in accordance with mixing ratios of wt(%) for researching the characteristics of the RDFs. $RDF_{k-1}$ was made of mixing materials which were dried sewage sludge, food wastes and combustible wastes. $RDF_{k-2}$ was made of mixing materials which were peat-moss, tar and sewage sludge. Combustion experiments were carried out at the optimal conditions which were m=2 under air-fuel condition and $850^{\circ}C$. The retention times in the combustor were set at 5, 10 and 15minutes. 50 g of RDFs was put in the combustor for each experiments. The ranges for heating values of $RDF_{k-1}$ with different mixing ratios were from 6,900 kcal/kg to 8120 kcal/kg. The ranges for heating values of $RDF_{k-2}$ with different mixing ratios were from 4,014 kcal/kg to 8,050 kcal/kg. As a result of this study, the heating values, moisture contents, components of chemical elements and mixing ratios of the materials in RDFs had big effects on the efficiency of the combustion. In $RDF_{k-1}$, the higher amounts of combustible wastes in the mixtures, the higher heating values, concentrations of $C_xH_y$ and amounts of ashes were produced. In $RDF_{k-2}$, the higher tar amounts in the mixtures caused the higher heating values, amounts of ashes, concentrations of CO gas and CxHy.

• Korean Journal of Materials Research
• /
• v.15 no.3
• /
• pp.161-165
• /
• 2005

We investigated selective dry etching of GaAs over AlGaAs and InGaP in high density planar inductively coupled $BCl_3/SF_6$ plasmas. The process parameters were ICP source power (0-500 W), RE chuck power (0-30W) and gas composition $(60-100\%\;BCl_3\;in\;BCl_3/SF_6)$. The process results were characterized in terms of etch rate, selectivities of GaAs over AlGaAs and InGaP, surface morphology, surface roughness and residues after etching. $BCl_3/SF_6$ selective etching of GaAs showed quite good results in this study. Selectivities of GaAs $(GaAs:AlGaAs\~36:1,\;GaAs:InGaP\~45:1)$ were superior at $18BCl_3/2SF_6$, 20 W RF chuck power, 300 W ICP source power and 7.5 mTorr. Addition of $(5-15\%)SF_6\;to\;BCl_3$ produced relatively high selectivities of GaAs over AlGaAs and InGaP during etching due to decrease of etch rates of AlGaAs and InGaP (boiling points of etch products: $AlF_3\~1300^{\circ}C,\;InF_3>1200^{\circ}C$ at atmosphere) at the condition. SEM and AFM data showed slightly sloped sidewall and somewhat rough surface$(RMS\~9nm)$. XPS study on the surface of processed GaAs proved a very clean surface after dry etching. It shows that planar inductively coupled $BCl_3/SF_6$ plasmas could be a good candidate for selective dry etching of GaAs over AlGaAs and InGaP.

• Journal of Chest Surgery
• /
• v.32 no.6
• /
• pp.495-503
• /
• 1999

Background: We tested the technical feasibility of fetal cardiac bypass and collected baseline data on the fetal hemodynamics and placental functions related to the cardiopulmonary bypass in the fetal lamb model. Material and Method: Eleven fetuses at 120 to 150 days of gestation were subjected to bypass via trans-sternal approach with a 12 G pulmonary arterial cannula and 14 to 18 F venous cannula for 30 minutes. All ewes received general anesthesia with ketamine. In all the fetuses, no anesthetic agents were used except muscle relaxant. Eight served as a group in which placenta was excluded from the extracorporeal circulation by clamping the umbilical cord during the bypass(the oxygenator group) and in the remaining three, the placenta worked as the only source of oxygen supply(the placenta group). Observations were made every 10 minute during a 30-minute bypass and 30-minute post bypass period. No prostaglandin inhibitors were used both in ewes and in fetuses. Result: Weights of the fetuses ranged from 1.9 to 5.2 kg. In the oxygenator group, means of arterial pressure, PaO2, atrial pressure, heart rate, and bypass flow rate ranged 69.8 to 82.6 mmHg, 201.7 to 220.9 mmHg, 4.1 to 4.3 mmHg, 169 to 182/min, and 140.3 to 164.0 ml/kg/min, respectively during bypass, but rapid deterioration of the fetal cardiac functions and the placental gas exchange was observed after the cessation of bypass. In the placenta group, means of arterial pressure decreased from 44.7 to 14.4 mmHg and means of PaCO2 increased from 61.9 to 129.6 mmHg during bypass. Flow rate was suboptimal(74.3 to 97.0 ml/kg/min) during bypass. All hearts fibrillated immediately after the discontinuation of bypass. Conclusion: In this study, the technical feasibility of fetal cardiopulmonary bypass was confirmed in the fetal lamb model. However, further studies with modifications of the bypass including an addition of prostaglandin inhibitor, an application of the total spinal anesthesia on the fetus, a creation of more concise bypass circuit, and a use of active pump are mandatory to improve the outcome.

• Clinical and Experimental Reproductive Medicine
• /
• v.28 no.4
• /
• pp.279-286
• /
• 2001

Objective: To elucidate 1) whether there are any differences in the urine concentrations of steroid hormone metabolites between patients with leiomyoma and normal controls 2) the correlation between urinary profiles of steroid hormones and leiomyomas of the uterus according to their type, location, volume, and weight. Materials of Methods : The study population consisted of 37 premenopausal patients with uterine leiomyoma and the control group consisted of 25 premenopausal normal volunteer women without uterine leiomyoma. Confirmation of the existence of uterine leiomyoma was done by ultrasonography and histopathological examination after surgery. The volume of the leiomyoma was estimated by trans-abdominal and/or trans-vaginal ultrasonography. The Leiomyomas were divided into 3 types (subserosal, intramural and submucosal). Seventeen patients had subserosal type of leiomyoma, 10 with the intramural type and 10 with the submucosal type. The locations of the leiomyoma were also divided into 3 groups (fundus, body and isthmus). Seventeen patients showed a fundus location, 10 in body, and 10 in isthmus. We compared urinary profiles of the endogenous steroids between patients with leiomyomas and normal controls, and also investigated the relationship between urinary profiles of the endogenous steroids and leiomyomas according to their type, location, volume and weight by using highly sensitive Gas Chromatography-Mass Spectrometry (GC-MS) system. Results: The mean ages of the patients with leiomyomas and the control group were $43.1{\pm}5.6$ and $40.6{\pm}7.2$ years, the weights were $63.4{\pm}7.3$ and $59.4{\pm}8.1\;kg$, and their heights were $155.4{\pm}4.8$ and $159.3{\pm}4.8\;cm$ respectively. Seventeen patients had subserosal, 10 had intramural, and 10 had submucosal leiomyomas. There were 17 patients with leiomyoma located in fundus, 10 in body and 10 in isthmus. $17{\beta}$-estradiol, 5-AT, 11-keto ET, $11{\beta}$-hydroxy An, $11{\beta}$-hydroxy Et, THS, THA, THE, a-cortolone, a-cortol, $\beta$-cortol, $11{\beta}$-OH Et/$11{\beta}$-OH An and E2/E1 were significantly increased in patients with leiomyoma than in the control group. $17{\beta}$-estradiol was significantly increased in the intramural and the submucosal types than in the subserosal type. There was no significant difference in the concentrations of urinary steroids according to the locations of leiomyomas. There was no significant relationship between the concentration of urinary steroids and the volume of the leiomyomas. $17{\beta}$-estradiol significantly decreased as the weight of uterus increased (r=-0.322, p=0.04). Conclusion: The concentrations of steroid hormone metabolites were generally increased in patients with leiomyoma but were not significantly related to the volume and weight of the leiomyomas. Our study suggests that steroid hormones may be involved in the initiation of leiomyomas but may not be involved in their progression. In addition, the concentrations of steroid hormone metabolites are not related to the leiomyoma type and location.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.436-442
• /
• 2017

Fischer-Tropsch synthesis is the technology of converting a syngas (CO+$H_2$) derived from such as coal, natural gas and biomass into a hydrocarbon using a catalyst. The catalyst used in the Fischer-Tropsch synthesis consists of active metal, promoter and support. The types of these components and composition affect the reaction activity and product selectivity. In this study, we manufactured an iron catalyst using ${\gamma}-Al_2O_3/SiO_2$ mixed support (100/0 wt%, 75/25 wt%, 50/50 wt%, 25/75 wt%, 0/100 wt%) by an impregnation method to investigate how the composition of ${\gamma}-Al_2O_3/SiO_2$ mixed support effects on the reaction activity and product selectivity. The physical properties of catalyst were analyzed by $N_2$ physical adsorption and X-Ray diffraction method. The Fischer-Tropsch synthesis was conducted at $300^{\circ}C$, 20bar in a fixed bed reactor for 60h. According to the results of the $N_2$ physical adsorption analysis, the BET surface area decreases as the composition of ${\gamma}-Al_2O_3$ decreases, and the pore volume and pore average diameter increase as the composition of ${\gamma}-Al_2O_3$ decreases except for the composition of ${\gamma}-Al_2O_3/SiO_2$ of 50/50 wt%. By the results of the X-Ray diffraction analysis, the particle size of ${\alpha}-Fe_2O_3$ decreases as the composition of ${\gamma}-Al_2O_3$ decreases. As a result of the Fischer-Tropsch synthesis, the CO conversion decreases as the composition of ${\gamma}-Al_2O_3$ decreases, and the selectivity of C1-C4 decreases until the composition of ${\gamma}-Al_2O_3$ was 25 wt%. In contrast, the selectivity of C5+ increases until the composition of ${\gamma}-Al_2O_3$ is 25 wt%.