• 제목/요약/키워드: GAP chemistry

Search Result 296, Processing Time 0.024 seconds

Theoretical Studies of 1,5-Sigmatropic Rearrangements Involving Group Transfer$^1$

  • IkChoon Lee;Bon Su Lee;Nam Doo Kim;Chang Kon Kim
    • Bulletin of the Korean Chemical Society
    • /
    • v.13 no.5
    • /
    • pp.565-570
    • /
    • 1992
  • The 1,5-sigmatropic rearrangements involving group (X) migration in ${\omega}$(X)-substituted 1,3-pentadiene, $C^1H_2=C^2H-C^3H=C^4H-C^5H_2-X$, where X = H, $CH_3$, $BH_2$, $NH_2$, OH or F, are investigated MO theoretically using the AM1 method. For the migrating groups without lone pair electrons, X = H, $CH_3$, or $BH_2$, the suprafacial pathway is favored, whereas for the migrating groups with lone pair electrons participating in the TS, $X=NH_2$, OH, or F, the antarafacial pathway is favored electronically. However excessive steric inhibition in the antarafacial TS for $X=NH_2$ leads to subjacent orbital controlled suprafacial process. The antarafacial shift of F is relatively disfavored compared to that of OH due to smaller orbital overlap and larger interfrontier energy gap in the TS.

Surface Characterization of Zinc Selenide Thin Films Obtained by RF co-sputtering

  • Lee, Seokhee;Kang, Jisoo;Park, Juyun;Kang, Yong-Cheol
    • Journal of the Korean Chemical Society
    • /
    • v.66 no.5
    • /
    • pp.341-348
    • /
    • 2022
  • In this work, radio frequency magnetron sputtering was used to deposit zinc selenide thin films on p-type silicon (100) wafers and glass substrates in a high vacuum chamber. Several surface characterization instruments were implemented to study the thin films. X-ray photoelectron spectroscopy results revealed that oxidized Zn bound to Se (Zn-Se) at 1022.7 ± 0.1 eV becomes the dominant oxidized species when Se concentration exceeds 70%. Scanning electron microscopy coupled with energy dispersive spectroscopy showed that incorporating Se in Zn thin films will lead to formation of ZnSe grains on the surface. Contact angle measurements indicated that ZnSe-60 exhibited the lowest total surface free energy value of 24.94 mN/m. Lastly, ultraviolet-visible spectrophotometry and ultraviolet photoelectron spectroscopy data evinced that the energy band gap gradually increases with increasing Se concentration with ZnSe-70 having the highest work function value of 4.91 eV.

Preparation of SnS Thin Films by MOCVD Method Using Single Source Precursor, Bis(3-mercapto-1-propanethiolato) Sn(II)

  • Park, Jong-Pil;Song, Mi-Yeon;Jung, Won-Mok;Lee, Won-Young;Lee, Jin-Ho;Kim, Hang-Geun;Shim, Il-Wun
    • Bulletin of the Korean Chemical Society
    • /
    • v.33 no.10
    • /
    • pp.3383-3386
    • /
    • 2012
  • SnS thin films were deposited on glasses through metal organic chemical vapor deposition (MOCVD) method at relatively mild conditions, using bis(3-mercapto-1-propanethiolato) tin(II) precursor without toxic $H_2S$ gas. The MOCVD process was carried out in the temperature range of $300-400^{\circ}C$ and the average grain size in fabricated SnS films was about 500 nm. The optical band gap of the SnS film was about 1.3 eV which is in optimal range for harvesting solar radiation energy. The precursor and SnS films were characterized through infrared spectroscopy, nuclear magnetic resonance spectroscopy, DIP-EI mass spectroscopy, elemental analyses, thermal analysis, X-ray diffraction, and field emission scanning electron microscopic analyses.

The Synthesis of CuInS2 Nanoparticles by a Simple Sonochemical Method

  • Park, Jae-Young;Park, Jong-Pil;Hwang, Cha-Hwan;Kim, Ji-Eon;Choi, Myoung-Ho;Ok, Kang-Min;Kwak, Ho-Young;Shim, Il-Wun
    • Bulletin of the Korean Chemical Society
    • /
    • v.30 no.11
    • /
    • pp.2713-2716
    • /
    • 2009
  • $CuInS_{2}$ nanoparticles were synthesized by a simple sonochemical method; First, Cu nanoparticles were prepared from $CuInS_{2}$ in methanol solution by a one pot reaction through the sonochemistry under multibubble sonoluminescence (MBSL) conditions. Second, the resulting Cu nanoparticles were treated with $InCl_3{\cdot}4H_2O$ and $CH_3CSNH_2$ (thioacetamide) at the same MBSL conditions to synthesize $In_2S_3$-coated Cu nanoparticles in methanol solution. Then, they were transformed into $CuInS_{2}$ (CIS) nanoparticles of 20 $\sim$ 40 nm size in diameter by thermal heating at 300 ${^{\circ}C}$ for 2 hr. The prepared CIS nanoparticles, of which band gap is 1.44 eV, were investigated by X-ray diffractometer, UV-Vis spectrophotometer, inductively coupled plasma spectrometer, and high resolution-transmission electron microscope.

Review on fabrication of graphitic carbon nitride based efficient nanocomposites for photodegradation of aqueous phase organic pollutants

  • Sudhaik, Anita;Raizada, Pankaj;Shandilya, Pooja;Jeong, Dae-Yong;Lim, Ji-Ho;Singh, Pardeep
    • Journal of Industrial and Engineering Chemistry
    • /
    • v.67
    • /
    • pp.28-51
    • /
    • 2018
  • Graphitic carbon nitride ($g-C_3N_4$) as a fascinating visible light active semiconductor photocatalyst has medium band gap, non-toxic nature, stable chemical structure and high thermal stability. Recently, intensive researches are focused on photocatalytic activity of $g-C_3N_4$ for wastewater treatment. This review demonstrates latest progress in fabrication of graphitic carbon nitride $C_3N_4$ incorporated nanocomposite to explore photocatalytic ability for water purification. The $g-C_3N_4$-based nanocomposites were categorized as $g-C_3N_4$ metal-free nanocomposite, noble metals/$g-C_3N_4$ heterojunction, non-metal doped $g-C_3N_4$, transition and post transition metal based $g-C_3N_4$ nanocomposite. Apart from fabrication methods, we emphasized on elaborating the mechanism of activity enhancement during photocatalytic process.

Monitoring of Pesticide Residues and Risk Assessment for Fruits in Market (국내 유통 과실류의 잔류농약 모니터링 및 위해성 평가)

  • Ahn, Ji-Woon;Jeon, Young-Hwan;Hwang, Jeong-In;Kim, Jeong-Min;Seok, Da-Rong;Lee, Eun-Hyang;Lee, Seong-Eun;Chung, Duck-Hwa;Kim, Jang-Eok
    • Korean Journal of Environmental Agriculture
    • /
    • v.32 no.2
    • /
    • pp.142-147
    • /
    • 2013
  • BACKGROUND: This study was conducted to monitor residual pesticides in domestic agricultural products and to assess their risk to human health. METHODS AND RESULTS: 123 samples containing both general and environment-friendly certified agricultural products were purchased from traditional domestic markets and supermarkets in six provinces of Korea. Multiresidue analyses of one hundred twenty-two pesticides except for herbicides were performed with gas chromatography-electron capture detector, gas chromatography-nitrogen/phosphorus detector, and high-performance liquid chromatography. Sixteen pesticides were detected in 45 agricultural product samples, which were 38 general, 6 low pesticide and 1 of GAP agricultural product samples and the detection rate was 33.6%. Pesticides detected in agricultural product samples were cypermethrin, lufenuron, fenvalerate, bifenthrin, chlorfenapyr and iprodione. Residual concentration of 18 samples were exceeded the recommended maximum residue limit set by Ministry of Food and Drug Safety and two kinds of unregistered pesticides in korea were also detected in two samples. CONCLUSION(S): In order to do risk assessment by agricultural products consumption, estimated daily intake of residual pesticides were determined and compared to acceptable daily intake, referring to %ADI values. The range of %ADI values was from 0.038% to 2.748%. Taken together, it demonstrates the pesticides found in agricultural products samples were below the safety margin, indicating no effect on human health.

Synthesis and Photovoltaic Properties of Low Band Gap π-Cojugated Polymer Based on 4,7-Di-thiophen-2-yl-benzo[1,2,5]thiadiazole (4,7-Di-thiophen-2-yl-benzo[1,2,5]thiadiazole을 기본으로 한 고분자의 합성 및 광전변환 특성)

  • Shin, Woong;You, Hyeri;Park, Jeong Bae;Park, Sang Jun;Jeong, Mi Seon;Moon, Myung-Jun;Kim, Joo Hyun
    • Applied Chemistry for Engineering
    • /
    • v.21 no.2
    • /
    • pp.137-141
    • /
    • 2010
  • Poly [4,7-Di-thiophen-2-yl-benzo(1,2,5)thiadiazole]-alt-1,4-bis(dodecyloxy)-2,5-divinylbenzene (PPVTBT) was synthesized by the Heck coupling reaction between 4,7-Di-thiophen-2-yl-benzo(1,2,5)thiadiazole and 1,4-bis(dodecyloxy)-2,5-divinylbenzene. The maximum absorption and band gap of PPVTBT were 550 nm and 1.74 eV, respectively. The HOMO and LUMO energy level of PPVTBT were -5.24 eV and -3.50 eV, respectively. The photovoltaic device based on the blend of PPVTBT and (6)-1-(3-(methoxycarbonyl)propyl)-{5}-1-phenyl[5,6]-$C_{61}$ (PCBM) (1 : 6 by weight ratio) was fabricated. The efficiency of device was 0.16%. The short circuit current density (Jsc), fill factor (FF) and open-circuit voltage (Voc) of the device was $0.74mA/cm^{2}$, 31% and 0.71 V, respectively, under AM 1.5 G and 1 sun condition ($100mA/cm^{2}$).

A Study of the Curricular Articulation of Oxidation-Reduction in the Textbooks from Middle School to College (중등 및 대학 교재 중 산화-환원반응에 대한 연계성 연구)

  • Kim, Hyo-Kyum;Moon, Seong-Bae
    • Journal of the Korean Chemical Society
    • /
    • v.44 no.2
    • /
    • pp.145-156
    • /
    • 2000
  • The content of oxidation-reduction in the chemistry textbooks from middle school to college was analyzed about the effective connection of curricular articulation. The classification was divided from five groups of 'first concept', 'same concept', 'overlap', 'development', and 'gap'. As a results, there was a deep big gap from middle school to high school and the effectiveness from high school to college was quite acceptable. Finally, the flow map, consisted of each concept between the school unit, was suggested.

  • PDF

Synthesis and Electrochemical Spectroscopic Characterization of Benzophenone Derivatives (벤조페논 유도체의 합성과 전기화학 및 분광학특성에 관한 연구)

  • Han, Man-So;Chae, Won-Seok
    • Journal of the Korean Applied Science and Technology
    • /
    • v.26 no.2
    • /
    • pp.132-142
    • /
    • 2009
  • The benzophenone derivatives(4-$CH_3O$-4'-$NO_2$ and 3,4'-di-$NO_2$) are synthesized by the Fridel-Craft acylation and the nitration method. Electrochemical redox potentials of the benzophenone derivatives (4-$CH_3O$, H, 3-Cl, 3-$NO_2$, 4-$NO_2$, 4-$CH_3O$-4'-$NO_2$, 3,4'-di-$NO_2$) are measured by using cyclic voltammometry. In the relationship of summing Hammett value and redox potential, we find a proportional constant$(\rho)$ that shows a good relation with an electrochemical property and a reactivity of the benzophenone derivatives. The benzophenone substituted with the electron donating groups(4-$OCH_3$ and 4-$OCH_3-4'-NO_2$) are higher the energy in the LUMO level, then increasing a band-gap energy$(E_g)$, their $E_gs$ are obtained as a 3.94 eV and 3.59 eV, respectively.

Distinct Band Gap Tunability of Zinc Oxysulfide (ZnOS) Thin Films Synthesized from Thioacetate-Capped ZnO Nanocrystals

  • Lee, Don-Sung;Jeong, Hyun-Dam
    • Applied Science and Convergence Technology
    • /
    • v.23 no.6
    • /
    • pp.376-386
    • /
    • 2014
  • Zinc oxysulfide nanocrystals (ZnOS NCs) were synthesized by forming ZnS phase on a ZnO matrix. ZnO nanocrystals (NCs) with a diameter of 10 nm were synthesized by forced hydrolysis in an organic solvent. As-synthesized ZnO NCs aggregated with each other due to the high surface energy. As acetic acid (AA) was added into the milky suspension of the aggregated ZnO NCs, transparent solution of well dispersed ZnO NCs formed. Finally ZnOS NCs were formed by adding thioacetic acid (TAA) to the transparent solution. The effect of recrystallization on the structural, optical and electrical properties of the ZnOS NCs were studied. The results of UV-vis absorption confirmed the band gap tunability caused by increasing the curing temperature of ZnOS thin films. This may have originated from the larger effective size due to the recrystallization of zinc sulfide (ZnS). From XRD result we identified that ZnOS thin films have a zinc blende crystal structure of ZnS without wurtzite ZnO structure. This is probably due to the small amount of ZnO phases. These assertions were verified through EDS of FE-SEM, XPS and EDS mapping of HR-TEM results; we clearly proved that ZnOS were comprised of ZnS and ZnO phases.