• 한국의류학회지
• /
• 제44권1호
• /
• pp.159-174
• /
• 2020

We selected 100% cotton fabric, 100% Hanji yarn fabric and two kinds of cotton / Hanji yarn blended fabrics and fused them with three kinds of interlinings in order to examine changes to the physical properties and the post-adhesion physical properties of Hanji yarn blended fabrics. Changes in KES values were examined after fusing. First, EM, B, 2HB, MMD values of Hanji yarn blended fabrics were higher than cotton fabric, and LT, RT, G, 2HG, LC, WC values of cotton fabric were higher than Hanji yarn blended fabrics. Tensile recovery was lowered, bending stiffness was increased, and shear stiffness was lowered when Hanji yarn was mixed. Second, the KES value of LT, B, 2HB, G, 2HG, LC, WC increased after fusing, while the EM, MMD values decreased. SMD was shown to decrease or increase depending on the type of fabric. The adhesive effect on bending stiffness and shear stiffness due to the mixing of Hanji shows a different tendency in the comparison of α_B and α_G.

• 대한치과보철학회지
• /
• 제57권2호
• /
• pp.95-101
• /
• 2019

목적: 레진 시멘트와 코발트 크롬 합금 간의 미세인장결합강도에 다양한 프라이머들이 미치는 영향을 평가하기 위한 것이다. 재료 및 방법: 본 실험에서는 4개의 프라이머(Universal primer, Metal primer II, Alloy primer, and Metal/Zirconia primer)와 2개의 레진 시멘트(Panavia F2.0, G-CEM LinkAce)를 사용하였고, 길이 6 mm, 폭 1 mm, 두께 1 mm의 150개의 코발트 크롬 빔들이 캐스팅 과정을 통해 제작되었다. 150개의 코발트 크롬 빔들을 프라이머와 레진 시멘트의 종류에 따라 프라이머 처리를 하지 않은 대조군을 포함하여 10개 그룹으로 나누었다. 금속과 레진시멘트를 산화알루미늄($125{\mu}m$ 크기)으로 샌드블라스팅 처리한 후 실리콘 틀을 이용하여 접착시켰다. 실험 전에, 입체현미경(stereomicroscope)을 이용하여 모든 금속-레진 빔들을 검사하였고, 미세인장결합강도 실험을 시행하였다. 통계적인 평가에는 one-way ANOVA와 Tukey's test를 사용하였다. 결과: 모든 그룹들의 평균 미세인장결합강도는 20 - 28 MPa이었으며, 그룹 간에 통계적으로 유의한 차이는 없었다. Panavia F2.0과 G-CEM LinkAce 그룹 모두에서 접착 파절과 응집 파절이 동시에 나타나는 혼합 파절이 가장 흔하게 일어난 파절 양태였다. 결론: 모든 실험군들의 미세인장결합강도는 상대적으로 높았지만, 본 실험에서는 프라이머의 사용이 Panavia F2.0 및 G-CEM LinkAce 레진시멘트와 코발트 크롬 합금 사이의 미세인장결합강도를 증가시키지 않았다.

• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.290-295
• /
• 2016

PURPOSE. The aim of this study was to evaluate the effect of paracetic acid (PAA) and ozone disinfection on the tensile bond strength (TBS) of silicone-based resilient liners to acrylic resins. MATERIALS AND METHODS. One hundred and twenty dumbbell shaped heat-polymerized acrylic resins were prepared. From the mid segment of the specimens, 3 mm of acrylic were grinded off and separated parts were reattached by resilient liners. The specimens were divided into 2 control (control1, control7) and 4 test groups of PAA and ozone disinfection (PAA1, PAA7, ozone1 and ozone7; n=10). While control groups were immersed in distilled water for 10 min (control1) and 7 days (control7), test groups were subjected to PAA (16 g/L) or ozone rich water (4 mg/L) for 1 cycle (10 min for PAA and 60 min for ozone) per day for 7 days prior to tensile tests. Measurements of the TBS were analyzed using 3-way ANOVA and Tukey's HSD test. RESULTS. Adhesive strength of Mollosil decreased significantly by application of ozone disinfection. PAA disinfection had no negative effect on the TBS values of Mollosil and Molloplast B to acrylic resin. Single application of ozone disinfection did not have any negative effect on TBS values of Molloplast B, but prolonged exposure to ozone decreased its adhesive strength. CONCLUSION. The adhesion of resilient liners to acrylic was not adversely affected by PAA disinfection. Immersion in ozonated water significantly decreased TBS of Mollosil. Prolonged exposure to ozone negatively affects adhesion of Molloplast B to denture base materials.

• 대한한의학회지
• /
• 제33권1호
• /
• pp.42-51
• /
• 2012

Objectives: We measured the density of smoke and harmful gases emitted from burning adhesive indirect moxa. Through the test we aimed to find out if there was an excessive amount of smoke emitted and if it included harmful gases. Methods: 9 types of adhesive indirect moxa were chosen. The buffer layers which do not burn during treatment were removed and 10g of each moxa were made into powder and put into a holder. A smoke density chamber (Smoke Density Chamber FTT. U.K) and Fourier transform infrared spectroscopy (FT-IR I 4001. MIDAC U.S.A.) were used to measure the density of smoke and harmful gases emitted from burning moxa by ISO 5659-2 test. Results: The result of measuring maximum smoke density showed that the regular indirect adhesive moxa (A-F) emitted high density smoke of 172.1-291.4Ds. The smokeless moxas, Seoam moxas, emitted the least amount of 3.4-5.5Ds. Concentrations of 7 typical harmful gases (CO, HCl, HCN, HBr, HF, SO2, NOx) were measured and all of the moxas emitted CO due to incomplete combustion. 4 types of moxa emitted NOx and all smokless moxas emitted NOx. HBr, HCN, HCl, HF, SO2 were not found in any of the moxas. Conclusions: The amount of harmful gases emitted from burning moxa was much lower than short-term exposure standards of chemical and physical factors (Ministry of Labor 2010-44). Further experiments measuring gases from moxa combustion should be done in larger environments similar to normal medical clinics.

• 대한한의학회지
• /
• 제23권2호
• /
• pp.211-224
• /
• 2002

Background and Objective : In order to investigate the effects of Gilgyunglwedok-tang (GRT) on antitumor activity and antimetastatic activity, studies were done experimentally. Materials and Methods : Experimental studies were perfonned for the cytotoxic effect on BALB/c mouse lung fibroblast cells, the proliferating effect of splenic lymphocyte, the expression of CD3e/CD4, CD3e/CD8, and B220 in peripheral blood mononuclear cells (PBMCs), the cytotoxic effect on A549, SK-OV-3, SK-MEL-2, MCF-7 cells, the inhibitory effect on the activity of DNA topoisomerase I, the T/C% in ICR mice bearing S-180, the inhibitory effect of Cell adhesive of A549 Cells and SK-OY-3 Cells to complex extracellular matrix, the inhibitory effect on lung colonies, the change of lung tissue, the antiangiogenic activity, and the effect on MMP-2 and MMP-9 gene expression in the RT1080 cell line. Results and Conclusion : The results were obtained as follows : 1. In the cytotoxic effect on BALB/C mouse lung fibroblast Cell, GHT didn't show the significant cytotoxic effect on BALB/C mouse lung fibroblast cell compared to the control group. 2. In thymidine uptake assay, GHT showed the significant proliferating effect of splenic lymphocyte in proportion to the concentration. 3. In the expression of CD3e/CD4, CD3e/CD8, and B220 in peripheral blood mononuclea cells (PBMCs) of mice, GRT had no significant change to the normal group in CD4. However, GRT showed an increase to the normal group in CD8 and GHT in the only $1\mu\textrm{g}/ml$ category showed an increase to the normal group in B220. 4. In the cytotoxic effect of GRT on A549, SK-OY-3, SK-MEL-2 and MCF-7 cells, there was no significant cytotoxic effect compared to the control group. 5. In the inhibitory effect on the activity of DNA topoisomerase I, GHT in the $10\mu\textrm{g}/ml$ category showed the inhibitory effect on the activity of DNA topoisomerase I in proportion to the concentration. 6. In the T/C% in ICRmice bearing S-180, GHTtreated group showed 123.7% of T/C% compared to the control group. 7. In the inhibitory effect of cell adhesive of A549 Cells and SK-OV-3 Cells to complex extracellular matrix, GRT in the only $100\mu\textrm{g}/ml$ category showed the significant inhibitory effect compared to the control group. 8. In the inhibitory effect on lung colonies, GHT showed the significant inhibitory effect on lung colonies compared to the control group. 9. In the change of lung tissue, GHT showed a significant decrease of lung cancer growth, interalveolar fibrosis and hyaline material compared to the control group. In the development of lymphocyte around lung cancer cells and lung parenchymal, GHT showed the significant inducement efficacy compared to the control group. 10. In CAM assay, the antiangiogenic activity of GHT showed 30%. 11. In the effect on MMP-2 and MMP-9 gene expression in the RT1080 cell line, GHT had no significant inhibitory effect on MMP-2 and MMP-9 gene expression compared to the control group. According to the above results, it could be suggested that GHT has an antitumor activity and antimetastatic activity.

• Restorative Dentistry and Endodontics
• /
• 제45권2호
• /
• pp.13.1-13.10
• /
• 2020

Objective: The aim of this study was to evaluate the influence of different modeling agents on the surface microhardness (Vickers hardness number; VHN), roughness (Ra), and color change (ΔE) of a nano-hybrid composite with or without exposure to discoloration by coffee. Materials and Methods: Sixty-four cylinder-shaped nano-hybrid composite specimens were prepared using a Teflon mold. The specimens' surfaces were prepared according to the following groups: group 1, no modeling agent; group 2, Modeling Liquid; group 3, a universal adhesive (G-Premio Bond); and group 4, the first step of a 2-step self-adhesive system (OptiBond XTR). Specimens were randomly allocated into 2 groups (n = 8) according to the storage medium (distilled water or coffee). VHN, Ra, and ΔE were measured at 24 hours, 1 week, and 6 weeks. The Kruskal-Wallis test followed by the Bonferroni correction for pairwise comparisons was used for statistical analysis (α = 0.05). Results: Storage time did not influence the VHN of the nano-hybrid composite in any group (p > 0.05). OptiBond XTR Primer application affected the VHN negatively in all investigated storage medium and time conditions (p < 0.05). Modeling Liquid application yielded improved Ra values for the specimens stored in coffee at each time point (p < 0.05). Modeling Liquid application was associated with the lowest ΔE values in all investigated storage medium and time conditions (p < 0.05). Conclusion: Different types of modeling agents could affect the surface properties and discoloration of nano-hybrid composites.

• 구강회복응용과학지
• /
• 제29권1호
• /
• pp.37-44
• /
• 2013

근관치료 후 적절한 치관부 밀폐를 위해 레진을 이용한 코어수복방법이 현재 많이 사용되고 있다. 하지만, 근관치료 과정에서 사용되는 NaOCl이나 EDTA같은 근관세척제는 레진 접착에 영향을 주는 것으로 알려져 있으며, 이에 관한 많은 연구들이 이루어져 왔다. 본 연구에서는 ethanol wet bonding을 치수강 상아질에 적용 시에 NaOCl과 EDTA가 결합강도에 미치는 영향에 대해 조사하였다. 30개의 인간 대구치로부터 총 60개의 시편을 얻었고, 이를 무작위로 4개의 군으로 분류했다. G1: 증류수로 세척후 증류수로 마무리 세척, G2: NaOCl로 세척 후 NaOCl로 마무리세척, G3: NaOCl로 세척 후 EDTA로 마무리세척, G4: NaOCl로 세척 후 EDTA로 마무리세척하고 접착과정에서 산부식과정 생략. 접착과정은 인산부식 후 에탄올의 농도를 50%, 70%, 80%, 95% 그리고 100%로 순차적으로 증가시켜가면서 상아질을 탈수시키고 에탄올에 적셔지도록 하였다. 프라이머는 HEMA가 포함되지 않은 상용화된 접착제인 ALL-BOND 3 RESIN과 에탄올을 반반씩 섞어 만들었다. 프라이머 적용 후 ALL-BOND 3 RESIN을 접착제로 사용하였다. 저점도 복합레진을 이용하여 6mm 두께로 적층충전한 후 빔 형태로 잘라 미세인장결합강도 실험을 하였다. NaOCl 처리한 그룹은 미세인장결합강도에 통계적으로 유의한 차이를 보여주지는 않았지만 낮은 평균값을 보여주었다(p=0.052). NaOCl 처리 후 1분간 EDTA로 처리한 그룹은 다른 그룹보다 유의하게 높은 결합강도를 보여주었다(p<0.05). EDTA 처리가 결합강도를 향상 시켰지만, 산부식 과정을 생략할 경우 유의하게 낮은 결합 강도를 보여주었으며, 이는 EDTA처리가 산부식 과정을 대신할 수는 없다는 것을 보여준다.

• 폴리머
• /
• 제31권4호
• /
• pp.308-314
• /
• 2007

범용 고분자 표면에 전도성 부여와 범용 고분자와 전도성 고분자층의 접합력 향상을 목적으로 폴리우레탄 (PU)-graft-poly(acrylic acid)(PAAc)/폴리아닐린(PU-g-AAc/PANI) 복합체 필름을 제조하였다. ATR-FTIR과 XPS분석 결과, 각 처리 절차에 대응하는 특성피크를 관찰하였고, 이를 통하여 각 단계의 실험이 성공적으로 수행되었음을 확인할 수 있었다. 표면저항을 측정한 결과, $2{\times}10^3\;ohm/sq$으로 절연성인 폴리우레탄 필름에 전도도가 부여됨을 알 수 있었고, PU-g-AAc/PANI 필름에서 폴리아닐린에 대한 도판트 역할을 하는 아크릴산의 양이 증가할수록 표면저항은 감소함을 알 수 있었다.

• 접착 및 계면
• /
• 제17권4호
• /
• pp.136-140
• /
• 2016

본 연구에서는 aliphatic diamine 또는 aromatic diamine을 함유하는 다이머산계 폴리아미드 수지를 축합중합법으로 합성하였으며, FT-IR로 폴리아미드가 합성되었음을 확인하였다. Diamine의 구조에 따라 합성된 폴리아미드의 기계적, 열적 특성을 확인하였다. 방향족 diamine 함유 폴리아미드(DAP)의 경우 지방족 diamine 함유 폴리아미드(DAH) 보다 인장강도와 전단접착강도가 우수하였다. DSC thermogram에서 DAP는 DAH 보다 높은 $T_g$와 $T_m$을 나타내었다. DAP의 연화점은 $112-115^{\circ}C$이고, DAH는 $98-121^{\circ}C$이었다.

• 마이크로전자및패키징학회지
• /
• 제10권3호
• /
• pp.9-17
• /
• 2003

In this paper, thermo-mechanical and rheological properties of NCPs (Non-Conductive Pastes) depending on silica filler contents and diluent contents were investigated. And then, thermal cycling (T/C) reliability of flip chip assembly using selected NCPs was verified. As the silica filler content increased, thermo-mechanical properties of NCPs were changed. The higher the silica filler content was added, glass transition temperature ($T_g$) and storage modulus at room temperature became higher. While, coefficient of thermal expansion (CTE) decreased. On the other hand, rheological properties of NCPs were significantly affected by diluent content. As the diluent content increased, viscosity of NCP decreased and thixotropic index increased. However, the addition of diluent deteriorated thermo-mechanical properties such as modulus, CTE, and $T_g$. Based on these results, three candidates of NCPs with various silica filler and diluent contents were selected as adhesives for reliability test of flip chip assemblies. T/C reliability test was performed by measuring changes of NCP bump connection resistance. Results showed that flip chip assembly using NCP with lower CTE and higher modulus exhibited better T/C reliability behavior because of reduced shear strain in NCP adhesive layer.