• Korean Journal of Materials Research
• /
• v.25 no.6
• /
• pp.279-287
• /
• 2015

In order to prepare anode materials for high power lithium ion secondary batteries, carbon composites were fabricated with a mixture of petroleum pitch and coke (PC) and a mixture of petroleum pitch, coke, and natural graphite (PC-NG). Although natural graphite has a good reversible capacity, it has disadvaantages of a sharp decrease in capacity during high rate charging and potential plateaus. This may cause difficulties in perceiving the capacity variations as a function of electrical potential. The coke anodes have advantages without potential plateaus and a high rate capability, but they have a low reversible capacity. With PC anode composites, the petroleum pitch/cokes mixture at 1:4 with heat treatment at $1000^{\circ}C$ (PC14-1000C) showed relatively high electrochemical properties. With PC-NG anode composites, the proper graphite contents were determined at 10~30 wt.%. The composites with a given content of natural graphite and remaining content of various petroleum pitch/cokes mixtures at 1:4~4:1 mass ratios were heated at $800{\sim}1200^{\circ}C$. By increasing the content of petroleum pitch, reversible capacity increased, but a high rate capability decreased. For a given composition of carbonaceous composite, the discharge rate capability improved but the reversible capacity decreased with an increase in heat treatment temperature. The carbonaceous composites fabricated with a mixture of 30 wt.% natural graphite and 70 wt.% petroleum pitch/cokes mixture at 1:4 mass ratio and heat treated at $1000^{\circ}C$ showed relatively high electrochemical properties, of which the reversible capacity, initial efficiency, discharge rate capability (retention of discharge capacity in 10 C/0.2 C), and charge capacity at 5 C were 330 mAh/g, 79 %, 80 %, and 60 mAh/g, respectively.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.150-155
• /
• 1998

Kinetic studies on the reaction of isoquinoline with para-substituted benzylbromides were conducted under various pressures (1 ~1000 bar) in acetonitrile. From the rate constants obtained, the activation parameters such as$\DeltaV^{\neq}, \Delta\beta^{\neq}, \DeltaH^{\neq}, \DeltaS^{\neq}, \DeltaG^{\neq}$ and Ea were evaluated. Reaction rate increasing the pressure and temperature. The activation compressibility coefficient and the activation entropy showed negative values. From the substituent effect and the results, it was found that the reaction proceeds through $S_N2$ mechanism, but the structure of transition state was slightly changed with substituents and pressure.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.233-236
• /
• 2004

Total impurity analysis of a primary standard solution is one of the essential procedures to determine an accurate concentration of the standard solution by the gravimetry. Bi impurity is determined in Pb standard solutions by inductively coupled plasma mass spectrometry (ICP-MS). The direct nebulization of the Pb standard solution produces a significant amount of the Pb matrix-induced molecular ions which give rise to a serious spectral interference to the Bi determination. In order to avoid the spectral interference from the interferent $^{208}PbH^+$, the hydride generation method is employed for the matrix separation. The Bi hydride vapor is generated by reaction of the sample solution with 1% sodium borohydride solution. The vapor is then directed by argon carrier gas into the ICP after separation from the mixture solution in a liquid-gas separator made of a polytetrafluoroethylene membrane tube. The presence of 1000 ${\mu}$g/mL Pb matrix caused reduction of the bismuthine generation efficiency by about 40%. The standard addition method is used to overcome the chemical interference from the Pb matrix. Optimum conditions are investigated for the hydride-generation ICPMS. The detection limit of this method is 0.5 pg/mL for the sample solutions containing 1000 ${\mu}$g/mL Pb matrix.

• 대한미세수술학회:학술대회논문집
• /
• 1992.11a
• /
• pp.70-71
• /
• 1992

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.5
• /
• pp.674-681
• /
• 1994

In this study, four kinds of vapor-permeable waterproofed fabrics were selected and their properties and the changes of properties were investigated after laundering, petroleum drycleaning or tetrachloroethylene drycleaning (each 1, 5, 10 times). The results were as follows: 1) In the water resistance, only Gore Tex satisfied its minimum property requirements, $1.0kg/cm^2$ It decreased after laddering and drycleaning. Hipora-1000, Hipora-2000, Aitac decreased slightly by petroleum drycleaning and Gore Tex decreased slightly by all three methods. 2) In the moisture vapor transmission, three except Hipora-2000 satisfied its minimum property requirement, $4000g/m^2{\cdot}24hr$.24hr. After laundering and drycleaning, it increased regardless of cleaning methods. 3) In the water repellency, Hipora-lOOG, Hipora-2000 were not almost decreased after laundering and drycleaning. Aitac decreased slightly by petrolem drycleaning and Gore Tex decreased slightly by laundering and petroleum drycleaning. 4) Air permeability of Aitac increased with increasing of cleaning times regardless of cleaning methods. 5) In the bond strength, only Gore Tex dissatisfied its minimum property requirements, 250g/cm. Regardless of cleaning method, bond strength decreased with increasing of cleaning times. 6) Color difference was large in case of Hipora-1000 by laundering, Hipora-2000 by laundering and tetrachloroethylene drycleaning Aitac by tetrachloroethylene drycleaning, Gore Tex by laundering. To diminish property change of vaper-permeable waterproofed fabric, petroleum drycleaning is more effective than laundering and tetrachloroethylene drycleaning.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.1829-1832
• /
• 2013

In the present study, investigations were carried out to screen the anticancer activities of fenugreek seed oil against cancer cell lines (HEp-2, MCF-7, WISH cells), and a normal cell line (Vero cells). Cytotoxicity was assessed with MTT and NRU assays, and cellular morphological alterations were studied using phase contrast light microscopy. All cells were exposed toi 10-1000 ${\mu}g/ml$ of fenugreek seed oil for 24 h. The results show that fenugreek seed oil significantly reduced the cell viability, and altered the cellular morphology in a dose dependent manner. Among the cell lines, HEp-2 cells showed the highest decrease in cell viability, followed by MCF-7, WISH, and Vero cells by MTT and NRU assays. Cell viability at 1000 ${\mu}g/ml$ was recorded as 55% in HEp-2 cells, 67% in MCF-7 cells, 75% in WISH cells, and 86% in Vero cells. The present study provides preliminary screening data for fenugreek seed oil pointing to potent cytotoxicity against cancer cells.

• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.30-35
• /
• 2012

Novel bio-polybutadiene polymers with controlled molecular weight (MW), MW distribution, chemical composition and micro structure were synthesized by a living anionic polymerization of butadiene and the subsequent coupling reaction of the thus obtained living polybutadiene and a vegetable oil. Anionic polymerization of butadiene was carried out in THF solvent using n-BuLi initiator. The resulting living polybutadienyllithium polymer was then reacted with epoxidized soybean oil (ESO) to obtain a star-polymer of polybutadiene and vegitable oil. Three different bio-elastomers were prepared by coupling living polybutadienes of MWs 1000, 5000 and 1000g/mol with ESO. The molecular structure and MW of the polybutadienes and bioelastomers were characterized by $^1H$-NMR, FTIR and GPC techniques.

• Toxicological Research
• /
• v.27 no.1
• /
• pp.19-23
• /
• 2011

It has been proposed that acute phase response can be a mechanism by which inhaled particles exert adverse effects on the cardiovascular system. Although some of the human acute phase proteins have been widely studied as biomarkers of systemic inflammation or cardiovascular diseases, there are only a few studies that investigated the role of serum amyloid P (SAP), a major acute phase protein in mice. In this study, we investigated the changes in SAP, following inhalation exposure to nickel hydroxide nanoparticles (nano-NH). We conducted 1) acute (4 h) exposure to nano-NH at 100, 500, and $1000\;{\mu}g/m^3$ and 2) sub-acute (4h/d for 3d) exposure at $1000\;{\mu}g/m^3$, then measured serum SAP protein levels along with hepatic Sap mRNA levels. The results show that inhaled nano-NH can induce systemic acute phase response indicated by increased serum SAP levels and hepatic Sap mRNA levels. To the best of our knowledge, this is the first study showing induction of SAP in response to repeated particle exposure, and the results suggest that SAP can be used as a biomarker for systemic inflammation induced by inhaled particles.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.7
• /
• pp.1000-1006
• /
• 2004

Selenium and vitamin E are micronutrients essential for normal health and maintenance in poultry. They are necessary in preventing free radical damage to phospholipid membranes, enzymes and other important molecules. Two experiments were conducted in a semi-commercial environment to examine the effect of Se source and vitamin E level in diet on broiler performance and meat quality. Increasing vitamin E from 50 IU to 100 IU did not affect growth performance of broilers although the 24 h drip-loss was tended to be reduced (p=0.06). There was an interaction between vitamin E and the source of Se in glutathione peroxidase activity (GSH-Px) and Se concentration in excreta. Increasing vitamin E from 50 IU to 100 IU elevated GSH-Px and Se concentration in excreta by 42 IU/g Hb and 0.9 ppm for the organic Se group, respectively, but reduced GSH-Px and Se concentration in excreta by 16 IU/g Hb and 1.3 ppm for inorganic group, respectively. Vitamin E played no role in the feather coverage of the birds when scored on day 37. Organic Se is more effective in improving feather score and 24 h drip-loss, with a markedly higher deposition rate in breast muscle and a lower excretion rate in the excreta (p<0.05) compared to the inorganic Se source. Both vitamin E and the source of Se did not affect (p>0.05) the energy utilisation by birds.

• Progress in Superconductivity
• /
• v.7 no.2
• /
• pp.174-178
• /
• 2006

For the practical application on SCFCL, Bi2212 tubes were fabricated by Centrifugal Forming Process (CFP) in terms of many different processing parameters. Typical sizes of tubes were 60, 150 mm in length and 2.5, 3.5, 4.8 mm in thickness. Initially powder was melted by induction heating. The optimum range of melting temperatures and preheating temperature were $1100^{\circ}C$ and $500^{\circ}C$ for 30min respectively. The nominal mold rotating speed was around 1000 RPM. A tube was annealed at $840^{\circ}C$ for 80 hours in oxygen atmosphere. The tube of 50mm x 70mm x 2.5mm, rotated with 1000 RPM showed $I_c=890\;A\;and\;T_c=80$. It was found that the tube processed with faster rate of mold rotation speed, thinner tube thickness and shorter tube length shows better electric characteristics as compared with the tube normally processed. In order to study the uniformity heat and fluid flow analysis tool was adopted along tube.