• 한국화재소방학회논문지
• /
• 제31권6호
• /
• pp.107-111
• /
• 2017

본 연구는 흡연시 발생되는 각종 유해오염물질을 효과적으로 저감할 수 있는 친환경 흡연부스를 제작하고, 유해물질의 제거효율 및 효과를 평가하는 것이다. 유입구-HEPA필터-전기집진기(EP)-첨착활성탄-배출구 등의 탈취설비를 갖춘 친환경 자동 흡연부스를 설계 및 제작하여, 흡연연기에 의한 유해오염물질의 제거효율을 측정 및 평가하였다. 측정방법으로는 내부의 배경농도, 설비 가동 시 배출구 농도, 10분 후 흡연부스의 농도를 측정하고, 평가항목으로는 복합악취, 일산화탄소, 미세먼지($PM_1$, $PM_{2.5}$, $PM_{10}$), 총휘발성유기화합물(TVOCs)을 대상으로 하였다. 복합악취 제거효율은 흡연부스 내부에서는 95.37%, 방지설비통과 배출구에서는 97.38%로 우수하였다. 일산화탄소 제거효율은 내부에서는 94.25%, 배출구에서는 98.32%로 나타났다. 또 흡연부스 내부에서의 미세먼지 제거효율은 98.59%이며, 배출구에서는 98.85%로 나타나 미세먼지 제거효율은 매우 우수한 것으로 나타났다. TVOCs는 흡연부스 내부에서는 $26,000{\mu}g/m^3$에서 $5,203{\mu}g/m^3$로 감소하여 79.99%의 제거효율로 나타났고, 환풍기 가동 후 방지설비 배출구에서는 $5,019{\mu}g/m^3$로 측정되어 제거효율은 80.70%로 나타났다. 따라서 본 연구를 통하여 제작, 설계된 흡연부스는 향후 소규모 작업환경 내에서도 각종 유해오염물질들을 제거하는 용도로 적용할 수 있을 것으로 생각된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권4호
• /
• pp.351-362
• /
• 1998

Microbial growth efficiency in the rumen was studied in sheep given hourly, 31.25 g oaten chaff with either 0.31 and 0.88 g urea or 1.88 and 5.63 g casein (exp. 1) and 33.33 g oaten chaff with 1.04 casein or 0.3, 0.6 and 0.9 g urea or the mixture of the casein and urea (exp. 2). Concentrations of ruminal fluid ammonia increased with increasing nitrogenous supplements. Organic matter digestibility in sacco in the rumen was not different irrespective of N sources. Isoacids and valeric acid increased with increasing ingested casein but decreased with increasing urea intake. Peptide and amino acid pools in ruminal fluid increased with increasing ammonia concentrations (exp. 2) suggesting that proteolytic activity and transportation of peptides and amino acids across microbial membrane of rumen microbes may be regulated by the metabolite mechanism (intracellular amino acids and $NH_4{^+}$, respectively). Densities of total viable and cellulolytic bacteria in ruminal fluid increased with increasing ammonia levels but that of small Entodinia decreased. The density of fungal sporangia growth on oat leaf blades decreased with increasing ammonia concentrations but appeared to remain constant in the presence of casein. Efficiency of net microbial cell synthesis was 15-28% higher when ammonia concentrations increased from 100 to above 200 mg N/l regardless of N sources. In conclusion, supplementation of preformed protein had no effect on rumen digestion and microbial growth efficiency. This could not be accounted for its effect on ruminal fluid ammonia. Increased microbial growth efficiency with increasing ammonia levels may be due to a reduction in the turnover of microbial cells within the rumen.

• 환경위생공학
• /
• 제16권2호
• /
• pp.9-16
• /
• 2001

If a pollutant invade at liguid and gas, it will be use ozone in order to remove or sterilize. Ozone excessively supply in order to receive satisfactory efficiency. If excessive ozone leave like that, second-problem will be occur. This study used high heater in order to treat occurred ozone. ; the results were as follow : 1. As initial ozone os supplied with $1.789{\;}g/m^3$ : For the 40, 50, 60, 70(V) of electric potential $O_3$ removal efficiency was treated 34.41, 73.78, 98.60, 98.97%(time of operation ; after 5min.). 2. As initial ozone is supplied with $3.645{\;}g/m^3$ : For the 40, 50, 60, 70(V) of electric potential, $O_3$ removal efficiency was treated 1.78, 69.27, 99.18, 98.68%(time of operation ; after 5min.). 3. As initial ozone is supplied with $4.759{\;}g/m^3$ : For the 50, 60, 70(V) of electric potential, $O_3$ removal efficiency was treated 61.29, 99.29, 99.18%(Time of operation ; after 5min.). 4. Used electric power is 15.38, 24.00, 35.29, 46.15(w/hr) at the 40, 50, 60, 70(V) of the electric potential. 5. Regarding electric power and $O_3$ removal efficiency, Used electric pote-ntial economized at 60(V).

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권2호
• /
• pp.40-46
• /
• 2010

In this study, microwave irradiation, which is reflected by metals, was used to reduce the amount of sewage sludge, and the results were used to verify solubilization efficiency and determine optimum operation conditions. Biogas production and methane content of the gas under optimized conditions were measured with the biochemical methane potential (BMP) test. The sludge was taken from a thickened sludge tank at J sewage treatment plant (JSTP) in Seoul, Korea. For the experiments, 50 mL of sludge was filled in vessels and the vessels were irradiated with the power of 500, 600, 700, and 800W for 2~5 min. In addition, Fe powder was added by 0.01, 0.05, and 0.1 g to compare the efficiency with and without Fe powder. The results confirmed that solubilization efficiency was higher in the presence of Fe powder. The optimum conditions of 0.01 g addition of Fe powder with 800W irradiation for 5 min, yielded nearly 22.95% higher solubilization efficiency than without Fe powder. The BMP tests were carried out using sludge obtained from the experiments carried out under the optimum conditions. As a result, sludge subjected by 800W with 0.01 g of Fe powder for 5 min displayed the highest level of gas production and methane content. Through this study, it could be confirmed that solubilization efficiency increased by addition of Fe powder.

• 한국물환경학회지
• /
• 제16권4호
• /
• pp.501-512
• /
• 2000

This study was carried out to develop the new process for RBC process which is capable of nutrient removal and to obtain its design parameters for Sludge Settling Type Rotating Biological Contactors by comparing RBC with RBC combined with HBR (Hanmee Bio-Reactor). To achieve more than 90% of organic removal efficiency, organic loading rate less than $6.0g\;BOD/m^2/d$ is recommended. Nitrification rate was about 90% at $6.0g\;BOD/m^2/d$. TN removal efficiency of RBC+HBR was higher than those of RBC1 and RBC2. TN removal efficiency at condition of $5.0g\;BOD/m^2/d$ was about 60% in RBC1. When BOD loading rate was $6.0g\;BOD/m^2/d$. TN removal efficiencies in RBC2 and RBC+HBR were about 70%, 80%, respectively. TP removal efficiency was more than about 67% for RBC1, about 63% for RBC2 and about 71 % for RBC+HBR at the same loading rate. From the blank experiment to observe removal efficiency in the first stage, it can be known that COD removal efficiency was about 30% and suspend solids settling rate was about 45%. It was proved that RBC+HBR is much better in sludge dewatering than RBC.

• 동의생리병리학회지
• /
• 제16권3호
• /
• pp.464-471
• /
• 2002

Author applied several engineering methodologies to classical ultrasonic nebulizer to cope with it's demerits. After several trials and errors, we got the several meaningful results. To evaluate the modified ultrasonic nebulizer for inhalation toxicology of cadmium, author used light-scattering photometer. This paper is the one part of inhalation exposure systems for inhalation toxicology study of cadmium. According to the testing conditions, source temperature 50℃ and inlet-duct band temperature 150℃, aerosol generation results for sodium chloride and cadmium chloride were as followings: Coefficients of variation(CV) of sodium chloride and cadmium chloride for repeated trials were 3.38 and 4.77 for 10g, 2.47 and 5.02 for 5g, and 4.70 and 2.98 for 2.5g. All the CVs were within 10% of acceptance variability. Count Per Minute(CPM) changes of NaCl and CdCl₂ for 5 repeated trials were similar. CPM ratios of CdCl₂/NaCl were 1.13 for 10g, 0.76 for 5g, and 1.06 for 2.5g. Relative aerosol generation of cadmium chloride to sodium chloride was the highest in 10g. Efficiency increases of 24.50% for 5g NaCl, 14.91 % for 2.5g NaCl, and 16.48% for 2.5g CdCl₂ with respect to theoretical efficiency were observed but 0.04% efficiency decrease was observed in 5g CdC₂. According to the modifications of source temperature(20, 50, 70℃) and inlet-duct band temperature(20, 50, 100, 150, 200℃), aerosol generation results for NaCl and CdCl₂ were as followings: CPM trends for each quantity excepting 10g NaCl in inlet-duct band temperature 200℃ were similar, and the highest CPM was observed in source temperature 70℃ to each inlet-duct band temperature. The highest CPMs to 10, 5, and 2.5g NaCl were observed in source temperature 70℃ and inlet-duct band temperature 20℃. Aerosol generation of cadmium chloride was increased with the higher source temperature, excepting inlet-duct band temperature 200℃. The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this trend was similar to NaCl aerosol generation The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this result was similar to NaCl aerosol generation. Observed efficiencies of 5 and 2.5g NaCl were similar to ifs theoretical efficiency but -3.08% efficiency decrease of 5g CdCl₂, 17.47% efficiency increase of 2.5g CdCl₂ were observed. CPM ratio of CdCl₂/NaCl of 10g was different to 5 and 2.5g, and 2.5g ratio was higher than 5g ratio. In conclusion, to get maximum aerosol generation for NaCl and CdCl₂ will be the conditions that set the appropriate inlet-duct band temperature for each materials and increase the source temperature. Sodium chloride can be used to evaluate the performance and predict the concentration for cadmium aerosol in aerosol generator and inhalation exposure system.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2005년도 추계 학술발표회 논문집
• /
• pp.55-58
• /
• 2005

This paper discusses the asymptotic efficiency of estimators for optimal portfolios when returns are vector-valued non-Gaussian stationary processes. We give the asymptotic distribution of portfolio estimators ${\hat{g}}$ for non-Gaussian dependent return processes. Next we address the problem of asymptotic efficiency for the class of estimators ${\hat{g}}$ First, it is shown that there are some cases when the asymptotic variance of ${\hat{g}}$ under non-Gaussianity can be smaller than that under Gaussianity. The result shows that non-Gaussianity of X(t) does not always affect worse. Second, we give a necessary and sufficient condition for ${\hat{g}}$ to be asymptotically efficient when the return process is Gaussian, which shows that ${\hat{g}}$ is not asymptotically efficient generally. From this point of view we propose to use maximum likelihood type estimators for g, which are asymptotically efficient. We examine our approach numerically.

• 환경생물
• /
• 제17권2호
• /
• pp.183-190
• /
• 1999

The bioleaching of heavy metals from fly ash was performed by Thiobacillus thiooxidans MET isolated from the enrichment culture of an anaerobically digested sludge. The effect of solid concentrations on the efficiency of metal leaching was studied in shaken flasks. In the range of solid concentrations 20 g.L­$^1$to 100 g.L­$^1$T. thiooxidans MET oxidized S$^{0}$ to sulfate without any lag period. The final pH of slurry solution was decreased to below pH 1, and the final oxide-redox potential (ORP) was increased to over 420 mV in the solid concentrations below 100 g.L­$^1$. However, the initial lag period of 4 to 8 days was required to obtain the pH reduction and ORP increase of the slurry solutions in the range of solid concentrations 150 g.L­$^1$to 300 g.L­$^1$. The sulfur oxidation rate of T. thiooxidans MET in 20~100 g.L­$^1$solid concentrations was 0.70~0.75 g-S.L­$^1$ㆍ d­$^1$, but its sulfur oxidation activity was remarkably inhibited with increasing solid concentration over 150 g.L­$^1$. Increasing fly ash solids concentration in the range of solids concentration 20 g.L­$^1$ to 200 g.L­$^1$decreased the removal efficiency of Zn, Cu, Mn, Cr and Pb. The solubilization of heavy metals from fly ash was strongly correlated with the pH value of slurry solution. When the pH of slurry solution was reduced to 3, the solubilization process of Zn, Cu and Mn started, and their solubilization efficiency of Zn, Cu and Mn was progressively increased below pH 2. However, the solubilization process of Cr and Pb started at pH 2.5 and 2.0, respectively.

• 상하수도학회지
• /
• 제32권3호
• /
• pp.253-259
• /
• 2018

Cu(II) can cause health problem for human being and phosphate is a key pollutant induces eutrophication in rivers and ponds. To remove of Cu(II) and phosphate from solution, chitosan as adsorbent was chosen and used as a form of hydrogel bead. Due to the chemical instability of hydrogel chitosan bead (HCB), the crosslinked HCB by glutaraldehyde (GA) was prepared (HCB-G). HCB-G maintained the spherical bead type at 1% HCl without a loss of chitosan. A variety of batch experiment tests were carried out to determine the removal efficiency (%), maximum uptake (Q, mg/g), and reaction rate. In the single presence of Cu(II) or phosphate, the removal efficiency was obtained to 17 and 16%, respectively. However, the removal efficiency of Cu(II) and phosphate was increased to 50~55% at a mixed solution. The maximum uptake (Q) for Cu(II) and phosphate was enhanced from 11.3 to74.4 mg/g and from 3.34 to 36.6 mg/g, respectively. While the reaction rate of Cu(II) and phosphate was almost finished within 24 and 6 h at single solution, it was not changed for Cu(II) but was retarded for phosphate at mixed solution.

• 공업화학
• /
• 제30권5호
• /
• pp.562-568
• /
• 2019

Cylindrical shape extrudates of calcium silicate hydrate (CSH) were prepared using different percentages of polyvinyl alcohol (PVA) / sodium alginate (SA) mixtures as binders and an aqueous solution containing 6% $H_3BO_3$ and 3% $CaCl_2$ was used as a cross linking agent. As the quantity of alginate increases, the phosphate removal efficiency and capacity were decreased. Among four different extrudate samples, the sample prepared by 8% PVA + 2% SA showed the highest phosphate removal efficiency (59.59%) and capacity (29.97 mg/g) at an initial phosphate concentration of 100 ppm and 2.0 g/L adsorbent dosage. Effects of the adsorbent dosage, contact time and initial phosphate concentration on the sample were further studied. The removal efficiency and capacity obtained by a 4.0 g/L adsorbent dose at an initial phosphate concentration of 100 ppm in 3 h were 79.38% and 19.96 mg/g, respectively. The experimental data of kinetic and isotherm measurements followed the pseudo-second-order kinetic equation and Langmuir isotherm model, respectively. These results suggested that the phosphate removal was processed via a chemisorption and a monolayer coverage of phosphate anions was on the CSH surface. The maximum adsorption capacity ($q_{max}$) was calculated as 23.87 mg/g from Langmuir isotherm model.