• 한국초전도ㆍ저온공학회논문지
• /
• 제20권1호
• /
• pp.19-22
• /
• 2018

The thermal and electrical properties of the conductor are critical parametersfor the design and optimization of the superconducting magnet. This paper presents simulation code to analyze electrical and thermal stability characteristics of the second generation (2G) high-temperature superconductor (HTS) by varying copper stabilizer thickness. Two types of commercial 2G HTS coated conductor tapes, YBCO and GdBCO were used in this study. These samples were cooled by Liquid Nitrogen ($LN_2$) having boiling at 77.3 K and an equivalent electrical circuit model for them is choosen and analysed in details. Also, an over-current pulse test in which a current exceeding a critical current was performed. From the simulation results, the influences of the copper stabilizer thickness on the stability characteristics of these samples are presented.

• 천문학회보
• /
• 제38권2호
• /
• pp.37.1-37.1
• /
• 2013

We present our study of analyzing the photometric properties of the globular cluster (GC) system which resides in the extended halo of the central bright Coma cluster galaxy NGC 4874. The core of the Coma cluster of galaxies (Abell 1656) was observed with both the HST Advanced Camera for Surveys (ACS) in the F475W (g475) and F814W (I814) and Wide Field Camera 3 IR Channel (WFC3/IR) in the F160W (H160) filters. The data analysis procedure and GC candidate selection criteria are briefly described. We investigate the interesting "tilt" features in color-magnitude diagrams for this GC system and their link to the nonlinear color-metallicity relation for GCs. The NGC 4874's GC system exhibits a bimodal distribution in the optical g475-I814 color and much more than half the GCs fall in the red side at g475-I814 ~ 1.1. This bimodality is weakened in the optical-IR I814-H160 color; the quantitative analysis on the features of both color distributions using the Gaussian Mixture Modeling code proves the bimodalities are different. Both colors, thus, cannot linearly reflect the bimodality of an underlying metallicity, supporting the suggestion that observed bimodalities in extragalactic GC colors are the metallicity-to-color projection effect.

• 한국통신학회논문지
• /
• 제30권9C호
• /
• pp.877-886
• /
• 2005

Various frame recovery algorithms have been suggested to overcome the communication quality degradation problem due to Internet-typical impairments on Voice over IP(VoIP) communications. In this paper, we propose a new receiver-based recovery method which is able to enhance recovered speech quality with almost free computational cost and without an additional increment of delay and bandwidth consumption. Most conventional recovery algorithms try to recover the lost or erroneous speech frames by reconstructing missing coefficients or speech signal during speech decoding process. Thus they eventually need to modify the decoder software. The proposed frame recovery algorithm tries to reconstruct the missing frame itself, and does not require the computational burden of modifying the decoder. In the proposed scheme, the Vector Quantization(VQ) codebook indices of the erased frame are directly estimated by referring the pre-computed VQ Codebook Index Interpolation Tables(VCIIT) using the VQ indices from the adjacent(previous and next) frames. We applied the proposed scheme to the ITU-T G.723.1 speech coder and found that it improved reconstructed speech quality and outperforms conventional G.723.1 loss recovery algorithm. Moreover, the suggested simple scheme can be easily applicable to practical VoIP systems because it requires a very small amount of additional computational cost and memory space.

• Composites Research
• /
• 제15권1호
• /
• pp.1-8
• /
• 2002

본 연구에서는 실제 구조형상의 사각형 상자형 날개와 전투기 날개에 대하여 구조재를 표피(skin)부분은 복합재료로 대체하고, 나머지 스파(spar)와 리브(rib)는 알루미늄으로 하여 플러터 해석을 수행하였다. MS/PATRAN을 이용하여 실제 날개 구조에 근사한 3차인 유한 요소 모델이 구축되었고, MSC/NASTRAN을 이용하여 고유진동 해석이 수행되었다. 유한 요소는 멤브레인(membrane)요소, 1차원 막대(rod)요소, 전단패널(shear panel)요소를 사용하였다. 복합재료의 적층은 실제적인 적층각을 이용하여 다양하게 변화시켜 해석하였다. 아음속 영역에서 비정상 공력 해석을 위하여 주파수 영역에서의 선형 공기력 이론인 DLM코드가 적용되었고, 주파수 영역 공탄성 지배방정식의 해법으로 V-g방법 및 p-k방법이 적응되었다.

• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1958-1966
• /
• 2003

Three-axis CNC surface machining entails a series of processes including rough cutting, intermediate cutting and finish cutting for a reference surface defined in CAD/CAM. This study is targeting development of an integrated NURBS surface interpolator that can incorporate rough, intermediate and finish cutting processes. In each process, volume to be removed and cutting condition are different according to the shape of a part to be machined and the reference surface. Accordingly, the proposed NURBS surface interpolator controls motion in real-time optimized for the machining conditions of each process. In this paper, a newly defined set of G-codes is proposed such that NURBS surface machining through CNC is feasible with minimal information on the surface composition. To verify the usefulness of the proposed interpolator, through computer simulations on NURBS surface machining, total machining time, size of required NC data and cutting force variations are compared with the existing method.

• Journal of Computing Science and Engineering
• /
• 제2권4호
• /
• pp.375-393
• /
• 2008

The dynamic cast operation allows flexibility in the design and use of data management facilities in object-oriented programs. Dynamic cast has an important role in the implementation of the Data Management Services (DMS) of the Mission Data System Project (MDS), the Jet Propulsion Laboratory's experimental work for providing a state-based and goal-oriented unified architecture for testing and development of mission software. DMS is responsible for the storage and transport of control and scientific data in a remote autonomous spacecraft. Like similar operators in other languages, the C++ dynamic cast operator does not provide the timing guarantees needed for hard real-time embedded systems. In a recent study, Gibbs and Stroustrup (G&S) devised a dynamic cast implementation strategy that guarantees fast constant-time performance. This paper presents the definition and application of a cosimulation framework to formally verify and evaluate the G&S fast dynamic casting scheme and its applicability in the Mission Data System DMS application. We describe the systematic process of model-based simulation and analysis that has led to performance improvement of the G&S algorithm's heuristics by about a factor of 2. In this work we introduce and apply a library for extracting semantic information from C++ source code that helps us deliver a practical and verifiable implementation of the fast dynamic casting algorithm.

• Journal of Radiation Protection and Research
• /
• 제37권3호
• /
• pp.146-148
• /
• 2012

The use of GEANT4 simulation toolkit has increased in the radiation medical field for the design of treatment system and the calibration or validation of treatment plans. Moreover, it is used especially on calculating dose simulation using medical data for radiation therapy. However, using internal visualization tool of GEANT4 detector constructions on expressing dose result has deficiencies because it cannot display isodose line. No one has attempted to use this code to a real patient's data. Therefore, to complement this problem, using the result of gMocren that is a three-dimensional volume-visualizing tool, we tried to display a simulated dose distribution and isodose line on medical image. In addition, we have compared cross-validation on the result of gMocren and GEANT4 simulation with commercial radiation treatment planning system. We have extracted the analyzed data of dose distribution, using real patient's medical image data with a program based on Monte Carlo simulation and visualization tool for radiation isodose mapping.

• 정보통신설비학회논문지
• /
• 제2권3호
• /
• pp.36-47
• /
• 2003

Wideband Code Division Multiple Access (WCDMA) is one of the air interface techniques proposed for the third generation (3G) mobile communication system. WCDMA was selected because it fulfills the IMT-2000 requirements for higher data rate trans mission, support of multimedia capabilities and other flexible services due to its variable bit rates and larger bandwidth, improved capacity and coverage, efficient power control and support for advanced and improved detector structures. Performance evaluation of 3G wireless network through simulation plays an important role in the design and implementation of the actual system, aiding the wireless system designer by providing them the necessary performance conformance statistics prior to implementation. In accordance with this goal, a simulator engine was developed entirely on a MATLAB platform to emulate the behaviour of the WCDMA air interface for both the uplink and downlink in a real world fading mobile environment. This paper discuss the development of the simulator along with a brief description of its functionalities and user interface. The WCDMA air interface mode focused in this paper is in accordance to the 3GPPs frequency division duplex (FDD) mode and restricted to the physical layer description. Performance results for the selected cases for the downlink, uplink, varying mobile velocity and sampling rates are also provided.

• 천문학회보
• /
• 제37권2호
• /
• pp.139.1-139.1
• /
• 2012

Wilson and Bappu (1957) found a significant relationship (WBR) between the absolute magnitude ($M_v$) and the width of the Ca II K emission line (W) for late type stars. In this study, we revisit the WBR to claim that WBR can be an excellent indicator of stellar surface gravity. We analyze 95 high-resolution spectra of G, K and M type stars obtained with UVES and BOES. WBR found in this work is $M_v$=34.22-18.34logW. In addition, stellar atmospheric parameters ($T_{eff}$, logg, [Fe/H], ${\xi}_{tur}$) are determined with the MOOG code and the Kurucz ATLAS9 model grids for G and K type stars. For M type stars, the method of Belle et al. (1999) is used to derive effective temperature which shows good agreement with other methods. Using the derived $T_{eff}$ and the measured logW,we find the relationship between logg and [logW, logT]; ${\log}g-_{fit}=-25.051-5.527{\log}W+10.254{\log}T_{eff}$. This relation can be applied to estimate the surface gravity of M type stars, which is difficult to be determined by other methods.

• 급식외식위생학회지
• /
• 제1권1호
• /
• pp.9-18
• /
• 2020

B. cereus-produced cereulide as an emetic toxin is commonly isolated in starch-based cooked foods. This study examined the prevalence of B. cereus from ready-to-eat foods in markets by polymerase chain reaction analysis and determined the relationship between the level of B. cereus and the quantity of cereulide in the sample after different storage times and temperatures. The prevalence of general B. cereus in 43 starch foods was 32.6%, and the level of B. cereus ranged from 0.5 to 1.95 log cfu/g, meeting the Korea Food Code Specifications of 3 log CFU/g of B. cereus. No samples revealed emetic B. cereus. Fried rice samples were inoculated with a cereulide-producing reference strain, B. cereus NCCP 14796, to determine the level of B. cereus and the quantity of cereulide in the samples after storage for 0, 4, 6, 8, 20, 24, 30, 48, 72, and 96 h at 7, 25, 35, and 57℃. The average levels of B. cereus at 7, 25, 35, and 57℃ were 4.38, 7.31, 7.88, and 3.82 log cfu/g, and the levels of cereulide were 150.41, 1680.70, 2652.65, and 77.83 ㎍/mL, respectively, showing a significant difference according to the incubation time (P<0.05) and temperature (P<0.001).