• Journal of Environmental Science International
• /
• v.25 no.10
• /
• pp.1349-1368
• /
• 2016

Concentrations of fine particulate matter ($PM_{2.5}$) and several of its particle constituents measured outside homes in Houston, Texas, and Los Angeles, California, were characterized using multiple regression analysis with proximity to point and mobile sources and meteorological factors as the independent variables. $PM_{2.5}$ mass and the concentrations of organic carbon (OC), elemental carbon (EC), benzo-[a]-pyrene (BaP), perylene (Per), benzo-[g,h,i]-perylene (BghiP), and coronene (Cor) were examined. Negative associations of wind speed with concentrations demonstrated the effect of dilution by high wind speed. Atmospheric stability increase was associated with concentration increase. Petrochemical source proximity was included in the EC model in Houston. Area source proximity was not selected for any of the $PM_{2.5}$ constituents' regression models. When the median values of the meteorological factors were used and the proximity to sources varied, the air concentrations calculated using the models for the eleven $PM_{2.5}$ constituents outside the homes closest to influential highways were 1.5-15.8 fold higher than those outside homes furthest from the highway emission sources. When the median distance to the sources was used in the models, the concentrations of the $PM_{2.5}$ constituents varied 2 to 82 fold, as the meteorological conditions varied over the observed range. We found different relationships between the two urban areas, illustrating the unique nature of urban sources and suggesting that localized sources need to be evaluated carefully to understand their potential contributions to $PM_{2.5}$ mass and its particle constituents concentrations near residences, which influence baseline indoor air concentrations and personal exposures. The results of this study could assist in the appropriate design of monitoring networks for community-level sampling and help improve the accuracy of exposure models linking emission sources with estimated pollutant concentrations at the residential level.

• The Journal of Fisheries Business Administration
• /
• v.29 no.1
• /
• pp.121-137
• /
• 1998

This study was conducted to examine the economic evaluation of the newly developed fish meal analog (BAIFA-M) in Korean rockfish feed. A raw fish feed (MP) and two commercially formulated diets (EP) were employed to compare weight gain (WG), feed conversion ratio (FCR) and survival rate (SR) from the sea cage culture system. By using the economic model in the practical sea cage culture system, feed cost, production cost and gross profit per kg production, rate of profit to gross revenue (RPGR), and internal rate of return (IRR) were calculated based upon the results of the experiment and the information of the private aquaculture farm (Young Chang) in Tong young, Korean. IRR criteria is one of the popular economic feasibility analysis methods applicable far aquaculture industry. This is an economic evaluation method to compare the given interest rate or the discount rate with IRR which can be calculated by the difference between the present value of the benefit stream and of the cost stream. The benefits of using EP on WG, FCR, SR, and production cost will be emphasized in this study. Fish averaging 20$\pm$3.6g (Mean$\pm$SD) were randomly distributed in each small cage (6m$\times$6m) as groups of 2,000 fish. By using 3 large size cages (12m$\times$12m), 12 small cages were constructed, and only 9 small cages were employed for three replicates of each diet treatment. To compare with MP diet, two sinking EP diets were designed by our laboratory and produced by the local feed company who wanted to promote these EP diets for the mass cage culture of Korean rockfish in the future. Two EP diets contain white fish meal and/or BAIFA-M as the main animal protein sources : WFM diet, maximum 43% of white fish meal : BAIEA- M diet, 30% of white fish meal nab replaced by BAIFA- M from WFM diet. Results are summarized in Table 1. Fish fed MP diet showed significantly lower SR than does fish fed two EP diets(P<0.05). However, there Were no significant difference on FCR among fish fed three practical diets. Table 1. Average feed conversion ratio (FCR), accumulative average survival rate (SR) and economic evaluation data far three practical diets. As we expected, BAIFA-M diet is more economical than WFM diet as well as MP diet. Feed cost and production cost per kg production from BAIEA - M diet were lower than those from WFM and MP diets. Moreover, gross profit per Kg production, RPGR and IRR from BAIFA- M diet were higher than those from WFM and MP diets. This economic evaluation study clearly indicated that MP diet should be replaced by the commerical formulated EP diets as soon as possible in the near future because MP diet is not economical in the practical sea cage culture system.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.159-173
• /
• 1991

This paper describes a potential-based panel method formulated for the analysis of a super-cavitating two-dimensional hydrofoil. The method employs normal dipoles and sources distributed on the foil and cavity surfaces to represent the potential flow around the cavitating hydrofoil. The kinematic boundary condition on the wetted portion of the foil surface is satisfied by requiring that the total potential vanish in the fictitious inner flow region of the foil, and the dynamic boundary condition on the cavity surface is satisfied by requiring thats the potential vary linearly, i.e., the tangential velocity be constant. Green's theorem then results in a potential-based integral equation rather than the usual velocity-based formulation of Hess & Smith type. With the singularities distributed on the exact hydrofoil surface, the pressure distributions are predicted with improved accuracy compared to those of the linearized lilting surface theory, especially near the leading edge. The theory then predicts the cavity shape and cavitation number for an assumed cavity length. To improve the accuracy, the sources and dipoles on the cavity surface are moved to the newly computed cavity surface, where the boundary conditions are satisfied again. This iteration process is repeated until the results are converged. Characteristics of iteration and discretization of the present numerical method are much faster and more stable than the existing nonlinear theories. The theory shows good correlations with the existing theories and experimental results for the super-cavitating flow. In the region of small angles of attack, the present prediction shows and excellent comparison with the Geurst's linear theory. For the long cavity, the method recovers the trends of the Wu's nonlinear theory. In the intermediate regions of the short super-cavitation, the method compares very well with the experimental results of Parkin and also those of Silberman.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.4 no.1
• /
• pp.81-86
• /
• 2010

This paper is case study on design, manufacture and application of customized assistive device for the ADL of person with brain lesions. The study had carried out from October 2010 to November 2010 and 2 clients from Assistive device case management demonstration project which is performed by Daegu assistive and rehabilitation center had participated. Case A, a 47-year-old man with brain lesions, stays only on the floor and could not get close to the usual toilet by himself because of the poor low extremities muscle strength and function. The moveable-toilet and customized ramp had applied to Case A. He clambers up the ramp and reach to the toilet easily. Case B, a 8-year-old boy with brain lesions, had difficulties with self-feeding because of his clumsy hand. Several existing feeding aids were applied but not appropriated. A customized feeding aid was designed and manufactured out of regard of Case A's ROM and right hand size. And his occupational therapist works together continuously to make him feed himself in the near future. Already-made assistive devices were not appropriate to Case A and B and to solve this problem, customized assistive devices were applied. The importance and needs of design and manufacture of assistive device were recognized through these case study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12B
• /
• pp.1050-1057
• /
• 2008

Wireless Mesh Networks (WMNs) have recently become a hot issue to support high link capacity in wireless access networks. The IEEE 802. I 1 standard which is mainly used for the network interface technology in WMNs supports up to 3 or 12 multiple channels according to the IEEE 802.11 specification. However, two important problems must be addressed when we design a channel assigmnent algorithm: channel dependency problem and channel scanning delay. The former occurs when the dynamic channel switching of an interface leads to the channel switching of other interfaces to maintain node connectivity. The latter happens per channel switching of the interface, and affects the network performance. Therefore, in this paper, we propose the Distance-Based Channel Assigmnent (DB-CA) scheme for multi-channel WMNs to solve such problems. In DB-CA, nodes just perform channel switching without channel scanning to communicate with neighboring nodes that operate on different channels. Furthermore, DB-CA minimizes the interference of channels being used by nodes near the gateway in WMNs. Our simulation results show that DB-CA achieves improved performance in WMNs.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.102-110
• /
• 2005

Piezoelectric transformers(PT) are expected to be small, thin and highly efficient, and which are attractive as a transformer with high power density for step down voltage. For these reasons, we have attempted to develop a step-down PT for the miniaturized adaptor. We propose a PT, operating in thickness extensional vibration mode for step-down voltage. This PT consists of a multi-layered construction in the thickness direction. In order to develop the step-down PT of 10 W class and turn ratio of 0.1 with high efficiency and miniaturization, the piezoelectric ceramics and PT designs are estimated with a variety of characteristics. The basic composition of piezoelectric ceramics consists of ternary yPb(Zr$_{x}$Ti$_{1-x}$)O$_{3}$-(1-y)Pb(Mn$_{1/3}$Nb1$_{1/3}$Sb$_{1/3}$)O$_{3}$. In the piezoelectric characteristics evaluations, at y=0.95 and x=0.505, the electromechanical coupling factor(K$_{p}$) is 58$\%$, piezoelectric strain constant(d$_{33}$) is 270 pC/N, mechanical quality factor(Qr$_{m}$) is 1520, permittivity($\varepsilon$/ 0) is 1500, and Curie temperature is 350 $^{\circ}C$. At y = 0.90 and x = 0.500, kp is 56$\%$, d33 is 250 pC/N, Q$_{m}$ is 1820, $\varepsilon$$_{33}$$^{T}$/$\varepsilon$$_{0}$ is 1120, and Curie temperature is 290 $^{\circ}C$. It shows the excellent properties at morphotropic phase boundary regions. PZT-PMNS ceramic may be available for high power piezoelectric devices such as PTs. The design of step-down PTs for adaptor proposes a multi-layer structure to overcome some structural defects of conventional PTs. In order to design PTs and analyze their performances, the finite element analysis and equivalent circuit analysis method are applied. The maximum peak of gain G as a first mode for thickness extensional vibration occurs near 0.85 MHz at load resistance of 10 .The peak of second mode at 1.7 MHz is 0.12 and the efficiency is 92$\%$.

• Genomics & Informatics
• /
• v.8 no.3
• /
• pp.108-115
• /
• 2010

Hypertension is the most prevalent disease worldwide and is itself a risk factor for cerebral, cardiac, and renal diseases. The inconsistency of candidate genes suggested by previous genomewide association studies (GWASs) may be due to not only differences in study design and genetic or environmental background but also the difference in the power of analysis between continuous traits and discrete traits. We analyzed 352,228 single nucleotide polymorphisms (SNPs) in 8842 unrelated Koreans obtained from Ansan and Ansung cohorts. We performed a series of GWA analyses using three different phenotype models; young hypertensive cases (278 subjects) versus elderly normotensive controls (680 subjects); the upper 25% (2211 hypertensive cases) versus the lower 25% of the SBP distribution (2211 hypotensive controls); and finally SBP and DBP as continuous traits (8842 subjects). The numbers of young hypertensive cases and elderly normotensive controls were not large enough to achieve genomewide significance. The model comparing the upper 25% subjects to the lower 25% of subjects showed a power that was approximate to that of QTL analysis. Two neighboring SNPs of the ATP2B1 gene, rs17249754 (SBP, p=$2.53^{-10}$; DBP, p=$1.28{\times}10^{-8}$) and rs7136259 (SBP, p=$1.30{\times}10^{-9}$; DBP, p=$6.41{\times}10^{-8}$), were associated with both SBP and DBP. Interestingly, a SNP of the RPL6 gene, rs11066280, revealed a significant genomewide association with SBP in men only (p=$3.85{\times}10^{-8}$), and four SNPs located near the MAN2A1 gene showed a strong association with DBP only in elderly men aged 60-70 years (e.g., rs6421827, p=$4.86{\times}10^{-8}$). However, we did not observe any gene variant attaining genomewide significance consistently in the three phenotype models except for the ATP2B1 gene variants. In general, the association signal with blood pressure was stronger in women than in men. Genes identified in GWASs are expected to open the way for prevention, early diagnosis, and personalized treatment of hypertension.

• The Journal of Korean Society for Radiation Therapy
• /
• v.10 no.1
• /
• pp.60-68
• /
• 1998

Treatment of a large diseased area with electron often requires the use of two or more adjoining fields. In such cases, not only electron beam divergence and lateral scattering but also fields overlapping and separation may lead to significant dose inhomogeneities(${\pm}20\%$) at the field junction area. In this study, we made Acrylic Electron Wedges to improve dose homogeneities(${\pm}5\%$) in these junction areas and considered application it to clinical practices. All measurements were made using 6, 9, 12, 16, 20MeV Electron beams from a linear accelerator for a $10{\times}10cm$ field at 100cm SSD. Adding a 1 mm sheet of acryl gradually from 1 mm to 15 mm, We acquired central axis depth dose beam profile and isodose curves in water phantom. As a result, for all energies, the practical range was reduced by approximately the same distance as the thickness of the acryl insert, e.g. a 1 mm thick acryl insert reduce the practical range by approximately 1 mm. For every mm thickness of acryl inserted, the beam energy was reduced by approximately 0.2MeV. These effects were almost independent of beam energy and field size. The use of Acrylic Electron Wedges produced a small increase $(less\;than\;3\%)\;in\;the\;surface\;dose\;and\;a\;small\;Increase(less\;than\;1\%)$ in X-ray contamination. For acryl inserts, thickness of 3 mm or greater, the penumbra width increased nearly linear for all energies and isodose curves near the beam edge were nearly parallel with the incident beam direction, and penumbra width was $35\;mm{\sim}40\;mm$. We decide heel thickness and angle of the wedge at this point. These data provide the information necessary to design Acrylic Electron Wedge which can be use to improve dose uniformity at electron field junctions and it will be effectively applicated in clinical practices.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.1
• /
• pp.1-11
• /
• 2002

Root distribution was monitored in the root zone of corn fields on several soil series in central Illinois during three growing seasons in order to find the effect of soil series and tillage system on root growth. A minirhizotron technique was used to videotape each soil profile in weekly intervals to a depth of 75 cm under conventional tillage (CT) and no tillage (NT) systems of cultivation. Root distribution near soil surface generally increased during the early stages of the growing season, but declined as surface soil moisture was depleted in late summer. Even though root distribution was not significantly different between soil series in this experiment. differences in root distribution between soil series were associated with the increases in root-available water storage capacity. Root population in the top 30 cm of NT plots. where increased water infiltration rates and saturated flow of soil moisture into the subsoil, was generally higher than that of CT plots in Illinois corn fields. Foots appeared in the deeper layers later in the growing season, with root penetration into subsoil layers occurring as much as 2-3 weeks earlier on the NT plots than in CT plots. In conclusion, root distribution was significantly affected by the tillage systems, but not different by soil series.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.21 no.3
• /
• pp.112-124
• /
• 2016

In order to see the spatio-temporal distribution patterns of macrobenthic fauna in subtidal areas of Nakdong River estuary, benthic fauna samples were collected seasonally at 8 sites in subtidal areas of Nakdong River estuary from February, 2013 to November, 2015. Sandy sediment facies was found in the southern part of the barrier islands in Nakdong River estuary while muddy sediment facies occupied at sites in offshore areas. The bottom salinity of the study area was measured greater than 30 psu during the study period. The mean species richness and density were estimated as 266 species and $859ind\;m^{-2}$, respectively. Polychaete worms were the most abundant fauna group, and four polychaete species such as Goniada maculata, Sternaspis chinensis, Magelona japonica, and Heteromastus filiformis occurred as dominant species in this study area. Pseudopolydora kempi known as an opportunistic species occurred dominantly only in August, 2013. From the multivariate analyses, the macrobenthic fauna in the subtidal area of the Nakdong River estuary could be divided into 2 assemblages that each occupied sites near barrier islands and offshore areas by sediment facies.