• 품질경영학회지
• /
• 제17권1호
• /
• pp.69-81
• /
• 1989

This study is concerned with a job sequencing method using the concept of sampling technique in the case of Job Shop. This is the follow study of Kang and Ro (1988) which examined the possibility of application of sampling technique to determine the Job Sequence in the case of Flow Shop. Not only it is very difficult, but also it takes too much time to develop the appropriate job schedules that satisfy the complex work conditions. The most job sequencing algorithms have been developed to determine the best or good solution under the special conditions or assumptions. The application areas of these algorithms are also very narrow, so it is very hard to find the appropriate algorithm which satisfy the complex work conditions. In this case it is very desirable to develop a simple job sequencing method which can select the optimal job sequence or near optimal job sequence with a little effort. This study is to examine the effect of sampling job sequencing which can select the good job of 0.01%~5% upper good group. The result shows that there is the sets of 0.05%~23% job sequence group which has the same amount of performance measure with the optimal job sequence in the case of experiment of N/M/G/$F_{max}$. This indicates that the sampling job sequencing method is a useful job sequencing method to find the optimal or good job sequence with consuming a small amount of time. The results of ANOVA show that the only one factor, number of machines is the significant factor for determining the job sequence at ${\alpha}=0.01$. It takes about 10 minutes to compare the number of 10,000 samples of job sequence by personal computer and it is proved that the selection rate of the same job sequence with optimal job sequence is 23.0%, 3.9% and 0.065% in the case of 2 machines, 3 machines and 4 machines, respectively. The area of application can readily be extended to the other work condition.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1370-1377
• /
• 2005

The bottom structure of an instrumented capsule is a part which is joined at the receptacle of the flow tube in the reactor in-core. A geometrical change of the bottom structure has an effect on the pressure drop and the vibration of the capsule. The out-pile test to evaluate the structural integrity of the material capsule called 04M-17U was performed by using a single channel and a half core test loop. From the pressure drop test, the optimized diameter of the cone shape's bottom structure which satisfies HANARO's flow requirement (19.6 kg/s) is 71 mm. The maximum displacement of the capsule measured at the half core test loop is lower than 1.0 mm. From the analysis results, it is found that the test hole will not be interfered with near the flow tubes because its displacement due to the cooling water is very small at 0.072 mm. The fundamental frequency of the capsule under water is 9.64 Hz. It is expected that the resonance between the capsule and the fluid flow due to the cooling water in HANARO's in-core will not occur. Also, the new bottom structure of a solid cone shape with 71 mm in diameter will be applicable to the material and special capsules in the future.

• 한국소음진동공학회논문집
• /
• 제25권8호
• /
• pp.575-582
• /
• 2015

This paper deals with the dispersion relation of the waves sustained in a cylindrical shell submerged in the fluid. The waveguide finite method and the boundary element method are used to predict the dispersion characteristic of the cylindrical shell. The dispersion diagram of the cylinder is estimated from the eigenvalue problem and the forced vibration response. It follows that the water-loading leads to the decrease of the cut-on frequencies and the phase speeds of the bending waves. On the contrary, the longitudinal waves and the torsional waves are hardly affected by the fluid, and therefore the order of the cut-on frequencies of the waves is changed. The acoustic dispersion diagram is also estimated from the forced acoustic response to identify the characteristics of the wave radiated to the fluid. It follows that the acoustic waves on and near the surface of the cylinder are the same as those in the structure. But at the far field the acoustic waves caused by subsonic waves e.g., the bending waves disappear as the increase of the distance. Conclusively, the characteristics of waves in cylindrical shells are significantly affected by water-loading in terms of the cut-on frequency, the wave speed, the order of the cut-on and radiation.

• Molecular & Cellular Toxicology
• /
• 제4권4호
• /
• pp.307-310
• /
• 2008

AAD16034 is an alginate lyase from Pseudoalteromonas sp. IAM14594. A very close homologue with known 3D structure exists (marine bacterium Pseudoalteromonas sp. strain no. 272). A three-dimensional structure of AAD16034 was generated based on this template (PDB code: 1J1T) by comparative modeling. The modeled enzyme exhibited a jelly-roll like structure very similar to its template structure. Both enzymes possess the characteristic alginate sequence YFKhG+Y-Q. Since AAD16034 displays enzymatic activity for poly-M alginate, docking of a tri-mannuronate into the modeled structure was performed. Two separate and adjacent binding sites were found. The ligand was accommodated inside each binding site. By considering both binding sites, a plausible binding pose for the poly-M alginate polymer could be deduced. From the modeled docking pose (i.e., the most important factor that attracts alginate polymer into this lyase) the most likely interaction was electrostatic. In accordance with a previous report, the hydroxyl group of Y345 was positioned close to the ${\alpha}$-hydrogen of ${\beta}$-mannuronate, which was suitable to initiate a ${\beta}$-elimination reaction. K347 was also very near to the carboxylatemoiety of the ligand, which might stabilize the dianion intermediate during the ${\beta}$-elimination reaction. This implies that the characteristic alginate sequence is absolutely crucial for the catalysis. These results may be exploited in the design of novel enzymes with desired properties.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.157-157
• /
• 2011

박막형태로 제작이 가능한 비정질 실리콘은 결정질 실리콘에 비하여 AM-1 (Air Mass 1:100mW/cm2)조건하에서 10-3 S/cm 정도의 높은 광전기전도도와 가시광선 영역($4000{\sim}7000{\AA}$)에서 약 10배의 높은 광흡수계수를 가지며, $300^{\circ}C$ 이하의 낮은 기판온도에서 다양한 기판위에 대면적으로 제작이 가능할 뿐만 아니라 제작공정이 단순하여 제작비용이 저렴하다는 이점이 있다. 본 실험에서 제작된 모든 박막은 PECVD로 증착하였으며 구조는 p-i-n superstrate형 구조를 사용하였고, 각 박막의 두께는 p-a-Si:H/i-a-SiGe:H/n-a-Si:H ($300{\AA}/2000{\AA}/600{\AA}$)으로 고정하였다. a-Si:H (hydrogenated amorphous silicon) 태양전지의 광 흡수층인 i-layer에서의 germane 가스 유량 변화(0, 20, 40. 60, 80, 100 sccm)에 대한 흡수율의 차이를 UV/Vis/Nir spectrophotometer (ultraviolet/visible/near infrared spectrophotometer)를 통해 확인하고, 그에 따른 a-Si:H 박막 태양전지를 제작하여 solar simulator를 사용하여 AM 1.5 G의 환경 조건에서 태양전지 특성을 평가하였다. 그 결과 germane 가스 유량이 증가함에 따라 파장에 대한 absorptance (a.u.)값이 증가함을 알 수 있었으며, 흡수되는 파장영역의 범위가 장파장으로 확대됨을 확인할 수 있었다. 또한 germane 가스 유량이 60 sccm 일때 a-SiGe:H 박막 태양전지 변환효율이 3.80%로 최대값을 가졌다. 실험에서 germane 가스 유량이 증가할수록 흡수율이 높아져 태양전지특성이 향상될 거라 예상 했지만, 100 sccm보다 60 sccm일 때가 단락전류밀도 값과 변환효율이 높다는 것을 확인할 수 있었다. 이는 각 layer사이에 계면상의 문제가 있을 거라 예상되며 직렬저항측정을 통해 확인할 수 있다.

• 지질공학
• /
• 제25권3호
• /
• pp.403-412
• /
• 2015

우리나라 지하수 개발가능량의 현황을 기출간된 지하수 관리 기본계획 보고서 내용을 기반으로 정리했다. 또한 지하수 개발가능량의 결정적인 요소인 지하수 함양량 산정기법을 검토하였다. 최종적으로 일정기간 수행된 지하수 기초조사 보고서에 나타난 지역별 지하수 개발가능량 산정기법을 검토, 요약했다. 지하수 개발가능량의 개선을 위해서는 개선된 기법(물수지 분석, 개선된 지하수위 변동법)의 적용과 함께 지속가능한 지하수 관리개념의 도입이 필요할 것으로 판단된다.

• 한국초지조사료학회지
• /
• 제24권4호
• /
• pp.293-300
• /
• 2004

방목초지 식물군학에 대한 생태적 특성을 결정하고 군집분석을 이용하여 군락간의 유사성을검정하고자, 1998년 8월부터 10월까지 독일의 중부지역인 Witzenhausen 근교에서 조사한 초지 식물군락을 Kassel 대학교 초지생태 연구소에서 컴퓨터 프로그램을 이용하여 분석하였다. 16개 지역의 초지에서 조사한 식생을 군강(Class)으로 분류한 식물군락은 대부분 Molinio-Arrhenatheretea 및 Festuco-Brometea 초지군락 이었으며, 반건조지 식물군락을 제외한 초지 식물군락의 생태적 반응과 사료가는 군락에 따라 다소 차이가 있었으나 조사료 생산에 적당하였다. 식물군락간 정의 상관은 14과 12번 군락이 가장 높았고, 7번과 9번 군락간에는 상관이 없었으며, 반건조지 식물군락은 다른 군락과 부의 상관을 나타내었다. 완전연관법에 의한 군집분석의 유사성 검정 측도는 유클러드 거리계수를 이용하는 것이 좋았으며, 식생구성이 비슷한 군락이 서로 군집을 형성하였다. 유사성이 높은 중소집단은 교란된 식물군락 (16, 15), 반건조지 초지군락 (14, 12, 11, 13), 중상급초지군락 (8, 7, 6) 중하급초지군락 (10, 9, 5), 중급 (4, 3), 상급초지군락 (2, 1) 등 6개 집단으로 분류되었다.

• 한국수산과학회지
• /
• 제38권3호
• /
• pp.172-183
• /
• 2005

To assess the macrobenthic community of oligohaline Youngam Lake, which is located at the Youngsan Watershed on the southwest part of Korea, macrobenthic fauna were collected at 45 stations during May, 2002. A total of 16 species of macrofauna were recorded with a mean density of 240 individuals per $m^2$ and a mean biomass of 7.07 g wet weight per $m^2$. Major dominant faunal groups were crustacean arthropods in terms of the number of species and abundance, and polychaete annelids in terms of biomass. The mean grain size was $5.7\;{\phi}$ which was dominated by silt fraction. The hydrological environment of the lake was characterised as an oligohaline environment with a mean surface water temperature of $17.8^{\circ}C$ and a mean salinity of 2.08 psu. The major dominant species were amphipods, Corophium sp. ($31\%$) and Jesogammarus sp. ($25\%$). Lowe. values of species diversity (H') with a mean of 0.81 (less than 1.0 from most stations) reflected the overall poor faunal diversity in this area. Multivariate analysis suggested that this benthic faunal community could be divided into four sub-regions such as the area from lake proper to water channel to the south, the stations located at the entrance and northern water channel, the stations near the dike, and the lake proper area. Freshwater and brackish water species which occurred in each station group were corresponded to the oligohaline salinity regime. Bottom hypoxia appeared in the entrance part of the lake between dyke and lake proper on May, which was resulted from stratification from spring season. These facts imply that marine macrobenthos were severely impacted by low salinity and a consequent hypoxia after embankment of the lake due to the restriction of water circulation.

• 대기
• /
• 제26권2호
• /
• pp.243-256
• /
• 2016

Total number concentration of aerosols larger than 10 nm ($N_{CN10}$), 3 nm ($N_{CN3}$), and cloud condensation nuclei ($N_{CCN}$) were measured during four different ship cruises over the Yellow Sea. Average values of $N_{CN10}$ and $N_{CCN}$ at 0.6% supersaturation were 6914 and $3353cm^{-3}$, respectively, and the minimum value of $N_{CN10}$ was $2000cm^{-3}$, suggesting significant anthropogenic influence even at relatively clean marine environment. Although $N_{CN10}$ and $N_{CN3}$ increased near the coast due to anthropogenic influence, $N_{CCN}$ was relatively constant and therefore $N_{CCN}/N_{CN10}$ ratio tended to decrease, suggesting that coastal aerosols were relatively less hygroscopic. In general $N_{CN10}$, $N_{CN3}$, and $N_{CCN}$ during the cruises seemed to be significantly influenced by wet scavenging effects (e.g. fog) and boundary layer height variation. Only one new particle formation (NPF) event was observed during the measurement period. Interestingly, the NPF event occurred during a dust storm event and spatial scale of the NPF event was estimated to be larger than 100 km. These results demonstrate that aerosol and CCN concentration over the Yellow Sea can vary due to various different factors.

• 천문학회보
• /
• 제36권2호
• /
• pp.122.2-122.2
• /
• 2011

For more than a decade, NEA (Near-Earth Asteroid) survey teams equipped with 1 meter-class telescopes discovered thousands of NEAs in the northern sky. As of August 2011, some 8,200 NEAs have been cataloged, yet only five percent of them has been investigated for their physical and chemical properties. In order to improve current situation, we propose a deep ecliptic survey utilizing KMTNet, for detection and characterization of NEAs in the southern sky. Thanks to the wide-field capability (four square degrees) of the telescopes, we will be able to considerably expand the search volume carrying out precision photometry down to 21.5th magnitude. We plan to focus our survey on opposition and two "sweet spots" in the ecliptic belt. Since SDSS colors characterize mineralogical properties of NEAs, g', r', i', z' filters will be employed. Based on the round-the-clock observation, we will study their rotational properties; for multiple systems, mass, density and other physical parameters can be obtained. We plan to maintain a dedicated database of the physical and mineralogical properties of NEAs. With this archive, it is expected that our understanding on the population will see a drastic change. We also plan to participate in the GAIA Follow-Up Network for ground based observation of the Solar System Objects (GAIA-FUN-SSO). The follow- up astrometry will be performed upon alerts issued by the GAIA-FUN-SSO Central Node in France.