• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.33-41
• /
• 2022

This paper describes a planar microstrip patch antenna designed on dielectric substrate. Two types of planar microstrip patch antennas are studied for the 5G wireless applications, one type is conventional microstrip structure, the other type is stacked microstrip structure fed by coaxial probe. Using electromagnetically coupling method, stacked microstrip patch antenna employing a multi-layer substrate structure was designed. The results indicate that the proposed stacked microstrip patch antenna performs well at 5G wireless service bandwith a broadband from 3.42GHz to 3.70GHz. The impedance bandwidth(VSWR≤2) is 360MHz(10.28%) from 3.42GHz to 3.78GHz. In this paper, through the designing of a stacked microstrip patch antenna, we have presented the availability for 5G wireless repeater system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.453-453
• /
• 2009

Wafer 태양전지와 Back sheet 및 기타 소재를 사용하는 기존의 Photovoltaic Module은 투과성이 존재하지 않으므로 본 논문에서는 태양전지 모듈의 투과특성을 발휘할 수 있는 Glass to Glass (GtG) Type의 Photovoltaic module에 대해 그 투과 특성 및 효율과의 관계를 분석하였다. 먼저 Module용 소재 중 Poly vinyl butyral (PVB) 및 Ethylene vinyl acetate(EVA) sheet의 Transmittance와 Haze 특성을 분석하였다. GtG 타입의 Photovoltaic Module은 약 90%정도의 투과율을 갖는 강화유리 및 Haze가 없는 PVB sheet를 사용하여 1m $\times$ 1m 크기로 제작하였다. GtG 타입으로 제조한 모둘 중 Cell 16EA를 사용한 모듈은 Cell 25EA를 사용한 모듈에 비해서 36% 투과율이 증가하였으나 효율 면에서 38%감소하였다. 최종적으로 GtG 타입 Module의 효율과 투과율에 관련된 식을 각각 정립하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.1
• /
• pp.45-53
• /
• 2019

In this paper, three types of array antennas for 5G mobile devices operating at 28 GHz were designed, and their performances were compared. The isolation between antenna elements was compared based on $S_{21}$. The $S_{21}$ of dipole, slot, and patch type are -13.76 dB, -16.88 dB, and -11.47 dB, respectively, with the slot-type antenna having the highest isolation. In order to compare the beam coverage performance, several characteristics such as beam width and maximum beam steering angle were analyzed. The analysis shows that the slot type has the widest steering angle of $63^{\circ}$ while the patch type has narrowest with $36^{\circ}$. In addition, to verify the performance of the antennas in the actual usage environment of the device, antenna characteristics in talk mode and data mode were analyzed through simulation. The results confirmed that the slot-type array antenna is the most suitable array antenna element for 28 GHz 5G mobile devices.

• Journal of Internet Computing and Services
• /
• v.24 no.5
• /
• pp.1-7
• /
• 2023

This paper proposes a small cell resource partitioning allocation method to solve interference to machine type communication devices (MTCD) and improve performance in 5G heterogeneous networks (HetNet) where macro base station (MBS) and many small cell base stations (SBS) are overlaid. In the 5G HetNet, since various types of MTCDs generate data traffic, the load on the MBS increases. Therefore, in order to reduce the MBS load, a cell range expansion (CRE) method is applied in which a bias value is added to the received signal strength from the SBS and MTCDs satisfying the condition is connected to the SBS. More MTCDs connecting to the SBS through the CRE will reduce the load on the MBS, but performance of MTCDs will degrade due to interference, so a method to solve this problem is needed. The proposed small cell resource partitioning allocation method allocates resources with less interference from the MBS to mitigate interference of MTCDs newly added in the SBS with CRE, and improve the overall MTCD performace using separating resources according to the performance of existing MTCDs in the SBS. Through simulation results, the proposed small cell resource partitioning allocation method shows performance improvement of 21% and 126% in MTCDs capacity connected to MBS and SBS respectively, compared to the existing resource allocation methods.

• Proceedings of the KSEE Conference
• /
• 2004.08a
• /
• pp.49-75
• /
• 2004

소음진동 규제법의 강화, 각종 건설민원 발생 및 안전강화 관리 차원에서 현재 국내 터파기 현장 및 각종 토공사에서 종래 시행되어지던 발파공법만으로 시행하는 것은 곤란하다. 건설교통부 설계 지침에서도 진동 규제치의 차이를 두어 파쇄와 발파와의 차이를 확연히 구분하는 실정이다. 기존에 발파는 그 경험이 많아 효과적인 방법 등이 널리 알려져 있지만 파쇄의 경우는 그 시공사례가 많지 않아 그 연구의 필요성이 대두되고 있다. 본 연구는 건교부에서 제시한 암파쇄굴착공법에 사용되어지는 미진동 파쇄기에 대한 연구로써 연암, 보통암, 경암지역에서의 전색제, 적정 패턴, 진동 특성 등을 분석하는데 그 목적이 있다. 시험은 크게 1, 2 타입으로 구분하여 실시하였으며 1타입의 경우는 천공장이 1.5m(180g 장약)이고, 2타입의 경우는 2.5m(360g)이다. 두 패턴을 기본으로 저항선, 공간격을 달리하여 시험을 진행하면서 그에 따르는 진동 및 파쇄정도의 차이를 관찰할 수 있었으며 암석 강도별 예상 진동식을 제안하였다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.203-214
• /
• 2014

We measured the contact dermatitis-causing substances concentrations in 28 commercial oxidative hair-coloring products. This study was aimed to provide the fundamental data about oxidative hair-coloring products. We selected 10 oxidation dyes (p-phenylenediamine, toluene-2,5-diamine, m-phenylenediamine, nitro-p-phenylenediamine, p-aminophenol, m-aminophenol, o-aminophenol, p-methylaminophenol, N,N'-bis(2-hydroxyethyl)-p-phenylenediamine sulfate, 2-methyl-5-hydroxyethylaminophenol) and 4 heavy metal (nikel; Ni, chromium; Cr, cobalt; Co, copper; Cu) as contact dermatitis-causing substances. To identify 10 oxidation dyes, hexane-2% sodium sulfite was used for the rapid and simple extraction and ultra performance liquid chromatography (UPLC) analysis was used for simultaneous analysis in 12 minutes. 10 oxidative dyes were detected as indicated on the product packaging and each concentration was lower than prescribed upper concentration limit by pharmaceutical manufacturing standards. And we analysed inductively coupled plasma-optical emission spectrophotometer (ICP-OES) for content search of heavy metal after microwave digestion. The heavy metal average concentration in oxidative hair-coloring products was 0.572 ${\mu}g/g$ for Ni, 3.161 ${\mu}g/g$ for Cr, 2.029 ${\mu}g/g$ for Co, 0.420 ${\mu}g/g$ for Cu, respectively. The average of concentration in powder type (henna) was higher than those of other foam and cream type oxidative hair-coloring products as follows; 1.800 ${\mu}g/g$ for Ni, 10.127 ${\mu}g/g$ for Cr, 7.082 ${\mu}g/g$ for Co, 1.451 ${\mu}g/g$ for Cu. Hair coloring products were classified into the six colors - black, dark brown, brown, dark brown, light brown, red brown and analyzed. Brown color had the highest average concentration of Co and the others had the highest average concentration of Cr.

• Journal of Food Hygiene and Safety
• /
• v.24 no.4
• /
• pp.318-323
• /
• 2009

Dahi is yoghurt like fermented dairy products available in Bangladesh made by traditional ways from raw milk. The aim of the present study was to check and compare the present quality status of the market dahi in reference to laboratory made dahi. For this, dahi was prepared in the laboratory (A) and collected from Kishoregonj district (B), Gazipur district (C), Bogra district (D) and Dhaka district (E and F). Consumer acceptance quality was judged on 100 point by a judge panel and chemical and microbiological quality test were done by established methods. 'A' type dahi was superior followed by E, D, F, B and C considering the consumer acceptance quality parameter. From chemical test, it appears that, B possess the lowest pH ($3.75\;{\pm}\;0.05$) and highest was in C ($4.46\;{\pm}\;0.15$). Total solids content of F type dahi ($318.40\;{\pm}\;4.44\;g/kg$) was highest and fat ($52.00\;{\pm}\;2.00\;g/kg$), protein ($44.33\;{\pm}\;2.00\;g/kg$) and ash ($10.76\;{\pm}\;0.31\;g/kg$) content were also higher in F type dahi. E and A type dahi were also with considerable figure in chemical quality parameter. Dahi B was inferior in respect of microbiological quality- total viable count (TVC) (${\times}\;10^5\;cfu/ml$) content was $94.00\;{\pm}\;4.58$, yeast (cfu/ml) content was $183.33\;{\pm}\;15.28$ and mold (cfu/ml) content was $53.33\;{\pm}\;15.28$. The TVC (${\times}\;10^5\;cfu/ml$), yeast (cfu/ml) and mold (cfu/ml) content of A type dahi were $39.67\;{\pm}\;4.51$, $50.00\;{\pm}\;10.00$ and $20.00\;{\pm}\;10.00$, respectively. Considering all the three major quality aspects dahi A was superior than others followed by F, D, E, C and B.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.166-169
• /
• 2007

최근에 정부의 "15/30 LED조명 보급정책"에 힘입어 개발된 8W급 조명용 LED광원의 CIE 색도좌표 (chromaticity coordinate)와 주파장(dominant wavelength)등을 측정 고찰 하였다. 적색(R), 녹색(G), 청색(B), 백색(W)순으로 주파장은 각각 620[nm], 531[nm], 465[nm], 579[nm]이고, 자극순도(excitation purity)는 0.98, 0.82, 0.97, 0.15이며, 휘도순도(colorimetric putity)는 45[%], 16[%], 279[%], 6[%]로 나타났다. Power LED의 최적배치 설계로서, 특히 백색 LED광원의 경우 백열전구(15 lm/W)에 비해 3배 이상의 높은 효율(47.71m/W)을 보였고, 배광측정에서는 78.7%의 효율로 나타났다. 현재 LED광원은 MR16이나 베이스 타입 등의 형태로 제작하여 스탠드, 복도등, 비상유도등, 침실용 등의 용도에 사용되고, 일부는 LED의 원형이나 면(flat)타입으로 가로등이나 투광등으로도 활용되고 있다. 따라서 이들에 대한 각각의 특성들을 제시해 둘 필요성인 인지되어 국내 최초로 개발된 R/G/B/W 8W급 LED광원에 대한 기본적인 광특성 결과를 얻었으며, 이중에서 HB 백색 LED램프의 색도좌표 값을 얻어 CIE표준광과의 색도좌표(x, y) 위치를 비교 검토할 수 가 있었다.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.95-103
• /
• 2022

As 5G mobile communication services gradually expand in P2P (peer-to-peer) or D2D (device-to-device) applications, traffic-oriented stream control such as YouTube streaming is emerging as an important technology. In D2D communication, the type of data stream most frequently transmitted by users is a video stream, which has the characteristics of a large-capacity transport stream. In a D2D communication environment, this type of stream not only provides a cause of traffic congestion, but also degrades the quality of service between D2D User Equipments (DUEs). In this paper, we propose a Traffic-Oriented Stream Scheduling (TOSS) scheme to minimize the interruption of dynamic media streams such as video streams and to optimize streaming service quality. The proposed scheme schedules the media stream by analyzing the characteristics of the media stream and the traffic type in the bandwidth of 3.5 GHz and 28 GHz under the 5G gNB environment. We examine the performance of the proposed scheme through simulation, and the simulation results show that the proposed scheme has better performance than other comparative methods.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.125.2-126
• /
• 2003

손바닥 선인장(Opuntia ficus indica var. saboten)은 열대지역 유래의 다년초로서 열매와 줄기를 공복에 갈아 마시면 변비치료, 이뇨효과, 장운동의 활성화 및 식욕증진에 효능이 있으며, 선인장 줄기는 오래전부터 피부질환, 류머티스 및 화상치료에 이용되어 왔다 선인장 열매(prickly pear pulp)는 14.5%의 고형분 함량을 가지고 있으며, 0.21%의 단백질, 0.12%의 지방, 0.44%의 회분, 0.19%의 pectin 이외에 미량의 비타민 A와 C 그리고 여러 종류의 무기질을 포함하고 있다. 선인장 열매로부터 분리된 pectin 성분은 콜레스테롤 수치를 낮추는 효과가 있다고 보고된 바 있다. 본 연구에서는 손바닥 선인장의 소비 확대 방안의 일환으로 손바닥 선인장 열매를 이용한 겔타입 파우치 제품의 개발을 위한 최적의 제조조건을 확립하고자 하였다. 이를 위하여 손바닥 선인장 열매의 추출특성을 반응표면분석에 의해 모니터링하고, 최적조건에서 얻은 추출물을 이용하여 제조한 파우치 제품의 관능적 특성을 검토하였다. 그 결과 가용성 고형분 함량은 추출온도 82.7$0^{\circ}C$, 추출시간 118.98min 및 용매비 24.91 $m\ell$/g일 때 최대값을 나타내었으며, 총페놀성화합물 함량의 최대값은 578.96 $\mu\textrm{g}$/$m\ell$으로 추출온도 89.37$^{\circ}C$, 추출시간 144.77 min 및 용매비 22.81 $m\ell$/g일 때였다. 전자공여능은 추출 온도 97.26$^{\circ}C$, 추출시간 109.30 min, 용매비 19.73 $m\ell$/g일 때 최대값을 나타내었다. 손바닥 선인장 열매의 겔타입 파우치에 대한 관능검사 결과, 최대의 관능점수를 나타내는 배합비는 전반적인 기호도가 3.75점으로 xanthan gum의 함량이 0.11%, 당의 함량이 6.59%, 사과식초의 함량이 1.34%인 것으로 나타났다.