• 한국대기환경학회지
• /
• 제29권5호
• /
• pp.601-614
• /
• 2013

The commercial charcoal kiln was projected the largest source of biomass burning sector in Korea. Commercial charcoal kiln was operated to emit air pollutants into the air without any air pollution prevention equipment. The object of this field survey was to understand characteristics of air pollutants concentration and emission factors and to provide preliminary data for effective processor from oak charcoal manufacturing process. As result of field survey, TSP, $PM_{10}$ and $PM_{2.5}$ concentration from charcoal kiln were 400~37,000 $mg/m^3$. These values were over the 100 $mg/m^3$ in TSP, this value was effluent quality standard of Clean Air Conservation Act. The average concentration of CO, $SO_2$ and TVOC were 2~5%. 0~110 ppm and 820~10,000 ppm respectively. The emission factors were 42.4 g-PM/kg-oak in TSP, 40.3 g-PM/kg-oak in $PM_{10}$, 38.2 g-PM/kg-oak in $PM_{2.5}$, 182.5 g-CO/kg-oak, 1.0 g-NO/kg-oak, $SO_2$ 0.2 g-$SO_2/kg$-oak and 104.4 g-TVOC/kg-oak. The part of commercial charcoal kiln had air pollution prevention equipment but it was difficult to work properly. Much wood tar excreted in exhaust emissions from oak charcoal manufacturing process. This wood tar was cause of many troubles sticking in the air pollutant prevention equipment. For handling particulate matters and gaseous air pollutants from oak charcoal manufacturing process in biomass burning, air pollutant prevention equipment design and management needs preprocessor for removal wood tar.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.153-153
• /
• 2010

The world is moving towards a post-carbon society and needs clean and renewable energy for sustainable development. There are many methodological approaches which are helping this shift based on analyzed data about energy resources and which focus on limited types of energy including liquid fossil, solid fossil, gaseous fossil, and biomass (e.g. IPCC Guidelines, ISO 14064-1, WRI Protocol, etc.). We should also consider environmental impact (e.g. greenhouse gas emissions, water use, etc.) and the economic cost of the renewable energy to make a better decision. Recently, researchers have addressed the environmental impact of new technologies which include photovoltaics, wind turbines, hydroelectric power, and biofuel. In this work, we analyze the environmental impact with a carbon emission factor to present a correlation between $CO_2$ emission and the cost of energy resources standardized by the energy output. In addition, we reviewed Life Cycle Assessment (LCA) as another methodology. Researchers who are studying energy systems have ignored the impacts of entire energy systems, e.g. the extraction and processing of fossil fuels. In power sector, the assessment should include extraction, processing, and transportation of fuels, building of power plants, production of electricity, and waste disposal. Therefore LCA could be more suitable tool for energy cost and environmental impact estimation.

• 대한핵의학회지
• /
• 제37권3호
• /
• pp.137-146
• /
• 2003

Rheumatic diseases can be categorized by pathology into several specific types of musculoskeletal problems, including synovitis (e.g. rheumatoid arthritis), enthesopathy (e.g. ankylosing spondylitis) and cartilage degeneration (e.g. osteoarthritis). Skeletal radiographs have contributed to the diagnosis of these articular diseases, and some disease entities need typical radiographic changes as a factor of the diagnostic criteria. However, they sometimes show normal radiographic findings in the early stage of disease, when there is demineralization of less than 30-50 %. Bone scans have also been used in arthritis, but not widely because the findings are nonspecific and it is thought that bone scans do not add significant information to routine radiography. Bone scans do however play a different role than simple radiography, and it is a complementary imaging method in the course of management of arthritis. The Image quality of bone scans can be improved by obtaining regional views and images under a pin-hole collimator, and through a variety of scintigraphic techniques including the three phase bone scan and bone SPECT. Therefore, bone scans could improve the diagnostic value, and answer multiple clinical questions, based on the pathophysiology of various forms of arthritis.

• 패션비즈니스
• /
• 제19권3호
• /
• pp.73-87
• /
• 2015

The purpose of this study is 1) to compare the employment status and wage level of "Clothing and Fashion" major (CF major) graduates with those from other majors and 2) to examine factors affecting the employment status and wage level of CF major university graduates. The data were pooled from the 2009-2012 Graduates Occupational Mobility Survey Data, conducted by Korea Employment Information Service. First, when graduates of CF major were compared with other majors in the same academic area-natural science and arts-, the rate of employment was higher for CF majors than that of other majors; on the other hand, there is no difference in the wage levels between those with graduates in CF majors and those with other majors. Second, we examined factors affecting CF major graduates' employment and wage level based on graduates' individual factors, university factor, and job preparation factors. Employment status of graduates in CF major was predicted by respondent's gender and university type, and work experience. The wage level of CF major graduates was significantly predicted by individual factors (e.g., gender and age, university factors (e.g., university type, university program, location), and job preparation factors (e.g., certificates, overseas experience of foreign language training, English test scores). The results of this study would provide a guide to direct university educational program in order to assess the current capabilities in the field of clothing and fashion.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.212-212
• /
• 2018

설계홍수량 산정요령(MLTMA, 2012)이 배포된 이후 실무에서는 홍수량을 산정할 때, Clark 단위도(Clark, 1945)를 적용하는 것으로 획일화되는 추세다. SCS 단위도(SCS, 1972)가 설계홍수량 산정요령에서 배제된 것은 Clark 단위도와 비교해서 도달시간 등 유역 매개변수를 같게 대입하더라도 홍수량이 과다 산정되는 경향 때문이다(e.g., Singh, 2000; Kilduff et al., 2010; Bhunya et al., 2011). 그럼에도 불구하고 SCS 단위도는 단변량 모형으로 적용 방법이 매우 간단하고, 실무에서 주로 사용되는 상용프로그램 대부분에 내재되어 있는 등 실무에서의 효용가치가 높은 편이다. SCS 단위도의 높은 첨두홍수량을 조정하고자 첨두시간 산정 공식을 수정한 SCS 방법이 제안되었으나(e.g., Ministry of Construction, 1992; Jung and Moon, 2001), 이는 첨두시간이 크게 산정되도록 하여 첨두홍수량을 낮추려는 시도로 도달시간, 기저시간 등 유역의 물리적인 특성을 왜곡한다. 반면에 SCS 단위도의 기울기(Peak Rate Factor; PRF)는 유역 경사에 따라 300에서 600 사이의 값을 갖게 되고 평균값으로 484가 제안되었으나(SCS, 1972), 이를 맹목적으로 사용하기에는 무리가 있다. 실험을 통해서 75-100, 284, 100-575 등 다양한 범위의 PRF 값이 제시되었고(e.g., Woodward et al., 1980; Wanielista et al., 1997), PRF에 직접 비례해서 첨두홍수량이 결정되는 SCS 단위도의 특성을 고려할 때, 유역의 조건에 맞는 적절한 PRF를 산정하는 것이 우선이다. 본 연구에서는 SCS 단위도의 첨두시간과 같은 종속변수 대신 PRF를 조정하는 방법에 주목해서 Clark 단위도로 산정된 홍수량과 서로 상호보완이 될 수 있도록 국내의 유역 환경에 적합한 SCS 단위도 적용 방안을 제시하고자 한다.

• Smart Structures and Systems
• /
• 제32권2호
• /
• pp.83-99
• /
• 2023

The temperature prediction approaches of three important locations in an operational longitudinal slab track-bridge structure by using three typical neural network methods based on the field measuring platform of four meteorological factors and internal temperature. The measurement experiment of four meteorological factors (e.g., ambient temperature, solar radiation, wind speed, and humidity) temperature in the three locations of the longitudinal slab and base plate of three important locations (e.g., mid-span, beam end, and Wide-Narrow Joint) were conducted, and then their characteristics were analyzed, respectively. Furthermore, temperature prediction effects of three locations under five various meteorological conditions are tested by using three neural network methods, respectively, including the Artificial Neural Network (ANN), the Long Short-Term Memory (LSTM), and the Convolutional Neural Network (CNN). More importantly, the predicted effects of solar radiation in four meteorological factors could be identified with three indicators (e.g., Root Means Square Error, Mean Absolute Error, Correlation Coefficient of R2). In addition, the LSTM method shows the best performance, while the CNN method has the best prediction effect by only considering a single meteorological factor.

• 마케팅과학연구
• /
• 제19권4호
• /
• pp.57-63
• /
• 2009

随着电子商务指数式增长(电子商务), 营销人员正试图获得通过强调服务质量和服务方面的相互作用而导致客户满意度或行为后果的竞争优势. 特别是对于服装, 服务质量是鼓励客户电子忠诚的关键因素之一, 并增加电子商务中服装零售的成功. 因此, 本研究探讨电子服务质量(电子SERVQUAL)的因素和根据Parasuraman等人(2005)的研究框架对网上服装购物的电子忠诚度的独特影响. 这项研究的具体目标是确定的基本层面的E - SERVQUAL, 分析有关在网上服装购物中电子SERVQUAL对点在忠诚度的影响的结构模型. 对于服务质量, 在网上购物方面的理论框架, 我们比较分析了有关传统和电子服务质量的因素的文献并确定了核心的两个方面和恢复服务. 这项研究的假设是电子SERVQUAL对电子忠诚度的影响. 客户满意度对电子服装网上购物服务的忠诚度有积极影响和客户满意度在电子SERVQUAL对服装网上购物电子忠诚度影响中的中介作用. 根据文献我们制成了一份自填式的问卷. 我们在美国从居住在大城市的有在网上购买服装产品的在线消费者中获得了252份有用的问卷. 通过因子分析(例如, 探索, 验证)评估了有效性和可靠性, 结构方程模型, 包括测量和结构模型, 通过线性结构8.8程序评估了包括测量和结构模型的结构方程模型. 结果显示, 网上购物网站的电子SERVQUAL的五个因素: 赔偿, 执行, 效率, 系统可用性和反应能力. 这支持在网上服装购物方面Parasuraman(2005)的E-S-QUAL包括两个方面的核心服务(如满足, 效率, 系统可用性)和恢复相关的服务(例如, 补偿, 回应). 在结构方程模型中, 有5个电子SERVQUAL因素的外生潜变量, 两个内生潜变量(例如客户满意度, 电子忠诚度). 对于测量模型, 各代表概念的因子载荷有显著的统计学意义, 比 0.60大, 内部一致性信从 0.85 至 0.8 8 不等. 在估计电子SERVEQUAL因素的结构模型, 系统的可用性对电子忠诚的直接和积极的作用, 而效率对网上服装购物的电子忠诚度有负面影响. 然而, 满足不是解释网上服装购物的电子SERVQUAL结果的重要指标. 这一发现意味着, 可被理解为系统提供服务的质量可能会增加对服装网上购物的客户满意度. 然而, 电子忠诚取决于服务质量没有被支持, 因为在网上服装购买中, 通过价值或满意度的中介作用, 服务质量对电子忠诚度(例如再购买意图)有间接影响. 此外, 获得赔偿和回应被发现对客户满意度有显著影响, 会影响网上服装购买的电子忠诚度. 因此, 获得赔偿和回应对电子忠诚度有显著的间接影响. 这表明, 恢复特定的服务因素在客户满意度最大化方面的重要作用, 以及维护客户对网上服装购物网站的忠诚度方面的重要作用. 研究结果在管理和研究方面都有启示. 时装营销者可以在建立与客户的长期关系的基础上, 不断测量顾客感知与恢复服务有关的服务质量等问题, 例如对问题和返回的迅速反应, 客户购买之后的问题赔偿. 为了保持电子忠诚, 在消费者购买服装中恢复服务对消费者第一次选择网站起到重要作用. 由于网上购物的消费者可以在任何地方购物, 提高竞争优势的营销策略是为消费者提供更好的服务质量, 最大限度地满意, 并把创造客户网上服装购买的电子忠诚度. 从研究的角度来看, 解释这些结果时, 本研究的一些局限需要被考虑. 对于未来的研究, 调查结果为这一重要主题理论和实证方面的进一步的研究提供了依据. 根据研究结果, 更全面的模型预测电子SERVQUAL的结果可以被开发和测试. 对全球时装市场, 这项研究可以扩展使用多国样本的跨文化的方法来研究服装的电子服务质量.

• 산경연구논집
• /
• 제11권1호
• /
• pp.29-38
• /
• 2020

Purpose: Understanding which product types of overseas travel (free independent travel vs. package travel) consumers will choose is one of the key issues of marketing and consumer behavior in travel agency management. Prior studies on overseas travel type preferences mainly focused on comparing regional differences (e.g., Asian vs. Westerner, or Korean vs. Australian, or Korean vs. Japanese, or American, French, Italian vs. Japanese) influencing the choice of overseas travel type. Another researchers focused on comparing cultural differences (e.g., individualism vs. collectivism, or individualistic culture vs. collectivistic culture), subcultural difference (e.g., acculturation; Koreans living in Republic of Korea vs. Koreans living in Australia), travel lifestyle, and socio-demographics (e.g., age, gender, income level, education level, marital status, occupation etc.). However, there are few studies that identify individual psychological differences (i.e., individual psychological differences within the same culture) influencing the choice of overseas travel type. Self-construal is a psychological factors that greatly influences choice behavior. The purpose of this study was to examine the role of self-construal as an antecedent variable influencing choice of overseas travel product type. Research design, data and methodology: To achieve the purpose of this study, the questionnaire survey method was used. Self-construal items composed of independent self-construal items and interdependent self-construal items. Product types of overseas travel were free independent travel (FIT) type versus package travel type. In this study, the correlation coefficient between independent self-construal and interdependent self-construal was nonsignificant. It meant that the relationship between independent self-construal and interdependent self-construal was orthogonal. Therefore it was analyzed that independent self-construal and interdependent self-construal separately. Reliability analysis, factor analysis, and logistic regression analysis (controlling gender and age) was used as the data analysis method. Results: According to the results of this study, the stronger independent self-construal, the more preference for the free independent travel type rather than package travel, and the stronger interdependent self-construal, the more preference for the package travel type rather than free independent travel. Conclusions: Self-construal is an antecedent variable influencing the choice of travel type. Travel agencies must consider the consumer's self-construal (independent self-construal vs. interdependent self-construal) before planning and designing overseas travel products.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.112-117
• /
• 2004

$Y_2$$_{-x}$G $d_{x}$ $O_3$:E $u^{3+}$(x=0.0, 0.3, 0.6, 1.0, 1.4) luminescent thin films have been grown on Si (100) substrates using pulsed laser deposition. The films grown under different deposition conditions have been characterized using microstructural and luminescent measurements. The crystallinity, the surface morphology and photoluminescence (PL) of the films are highly dependent on the amount of Gd. The photoluminescence (PL) brightness data obtained from $Y_2$$_{-x}$G $d_{x}$ $O_3$:E $u^{3+}$ films grown under optimized conditions have indicated that Si (100) is one of promised substrates for the growth of high quality $Y_2$$_{-x}$G $d_{x}$ $O_3$:E $u^{3+}$ thin film red phosphor. In particular, the incorporation of Gd into $Y_2$ $O_3$ lattice could induce a remarkable increase of PL. The highest emission intensity was observed with $Y_{1.35}$G $d_{0.60}$ $O_3$: $E^{3+}$, whose brightness was increased by a factor of 1.95 in comparison with that of $Y_2$ $O_3$:E $u^{3+}$ films.3+/ films.films.lms.

• 한국전문물리치료학회지
• /
• 제14권3호
• /
• pp.64-71
• /
• 2007

The purposes of this study were to determine correlations between the Berg Balance Test (BBS), Timed -UP & Go Test, Fugl Meyer-L/E, Balance, Sensory (FM-L/E, B, S), Motor Assessment Scale-Gait (MAS-G), Comfortable maximal Gait Speed (C MGS), and the Modified Barthel Index (MBI). The subjects were 40 stroke patients of the Korea National Rehabilitation Center in Seoul. Main outcome measures were Balance control (BBS, FM-B), Gait (TUG, C MGS, MAS-G), ADL (MBI) and Motor Function of Lower Extremities (FM-L/E, S). The data were analyzed using Pearson product correlation. FM scales between other clinical and instrumental indexes and multiple stepwise regression analyses were performed to identify prognostic factors for Balance, Gait and ADL Motor Function of Lower Extremity inclinations. The results of this study were as follows: The BBS, FM-L/E, balance, sensory and MBI showed positive correlation relations, but TUG and C MGS showed negative correlations. The sensory factor of the FM-scale showed the strongest variance in predicting BBS. However the FM-balance showed the strongest variance in predicting TUG, MAS-G and C MGS. The use of both quantitative and qualitative scales was shown to be a good measuring instrument for the classification of the general clinical performance of the patients.