• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.6
• /
• pp.717-726
• /
• 2007

Fully-grown flocs in a mixing tank of membrane filtration with dead-end membrane are ruptured while passing through a pump and the ruptured flocs are aggregated again in a Membrane-Feed-Pipe (MFP). To look at more details, this study tries to relate the reaggregation to a parameter of mixing intensity in MFP, i.e., G-value. The G-value is a function of Reynolds number, pipe diameter, friction factor and average velocity in MFP. To deal with polydispersity condition, we develop a representative particle size called in this study EDPD (Effective Diameter for Polydispersity condition in Dead-end filtration). The experimental results show that as the G-value increases, the EDPD decreases and also the cake resistance increases. Through comparison between EDPD and cake resistance, these results show that cake resistances are controlled by reaggregation phenomenon in MFP. The effect of detention time in MFP, however, does not affect the reaggregation of the broken flocs as G-values are increased.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.341-345
• /
• 2011

The Schiff base cobalt(II) complex, bis[4-chloro-2-((E)-(isopropylimino) methyl) phenol]cobalt(II), has been prepared and characterized by single-crystal X-ray diffraction analyses. The phenomenological, kinetic and mechanistic aspects of the cobalt (II) complex have been studied by TG/DTG techniques. On the basis of the experimental data, the kinetic parameters such as activation energy, pre-exponential factor and entropy of activation were computed, and then the most probable mechanism function was estimated as $g({\alpha})={\alpha}^2$ 2. Hence the rate controlling process at all stages of decomposition is onedimensional diffusion (Parabolic model).

• Journal of the Korean Society of Costume
• /
• v.61 no.9
• /
• pp.97-113
• /
• 2011

To develop the work clothes for the employees in the mechatronics industry in South Korea, a questionnaire survey on many aspects of the work clothes such as type, color, detailed design and function preference of the subject employees has been carried out in the study. The results throughout the survey highlighted certain functions such as extensibility, thermal and air permeability of importance for the work clothing performance. To improve the discomfort caused by some work motions (i.e. squatting down, ascending/descending the stairs, raising arms), more allowances were given to the measurements (i.e. body rise + 2cm and crotch depth + 1cm for squatting down pose; thigh circumference + 1cm and knee circumference + 1cm for ascending/ descending the stairs pose; chest circumference + 5~6cm and jumper length to the level of hip circumference line for raising arms pose) for work clothes patternmaking. The evaluation of the two types of spring/summer and winter work clothes' clothing comfort and wearer mobility suggested certain points to improve the clothing performance (e.g. ventilation slits on the back pleats, arm pits and collar band of the spring/summer suit using net material and lining for the winter suit using quilted thermal materials) and wearer mobility (e.g. pants hem buckles for the easy work motion), which also enabled to fulfill the workers' work clothes design preference.

• Bulletin of the Korean Mathematical Society
• /
• v.22 no.1
• /
• pp.7-10
• /
• 1985

For each a.mem.S and f.mem.m(S), denote by $l_{a}$ f(s)=f(as) for all s.mem.S. If A is a norm closed left translation invariant subalgebra of m(S) (i.e. $l_{a}$ f.mem.A whenever f.mem.A and a.mem.S) containing 1, the constant ont function on S and .phi..mem. $A^{*}$, the dual of A, then .phi. is a mean on A if .phi.(f).geq.0 for f.geq.0 and .phi.(1) = 1, .phi. is multiplicative if .phi. (fg)=.phi.(f).phi.(g) for all f, g.mem.A; .phi. is left invariant if .phi.(1sf)=.phi.(f) for all s.mem.S and f.mem.A. It is well known that the set of multiplicative means on m(S) is precisely .betha.S, the Stone-Cech compactification of S[7]. A subalgebra of m(S) is (extremely) left amenable, denoted by (ELA)LA if it is nom closed, left translation invariant containing contants and has a multiplicative left invariant mean (LIM). A semigroup S is (ELA) LA, if m(S) is (ELA)LA. A subset E.contnd.S is left thick (T. Mitchell, [4]) if for any finite subser F.contnd.S, there exists s.mem.S such that $F_{s}$ .contnd.E or equivalently, the family { $s^{-1}$ E : s.mem.S} has finite intersection property.y.

• Journal of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.23-31
• /
• 1977

For the metal complex of $d^1$ configuration with the octahedrally coordinated ligands, the crystal field parameter, 10Dq, is calculated from first principles within the framework of the crystal field theory. With the point charge model, the configuration interaction is introduced by use of the Shull-L$\"{o}$wdin functions. Through the Integral Hellmann-Feynman Theorem, the higher order effect is visualized. It is found that the higher order effect on 10Dq is about $50{\%}$ of the first order effect. Since 3d function is angularly undistorted and radially equally distorted in $E_g\;and\;T_{2g}$ states, due to the octahedral potential, the calculated 10Dq is still the unique parameter for the splitting.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.15-22
• /
• 2006

This paper presents a novel signal tracking algorithm for GNSS receivers using a MLE technique. In order to perform a robust signal tracking in severe signal environments, e.g., high dynamics for navigation vehicles or weak signals for indoor positioning, the MLE based signal tracking approach is adopted in the paper. With assuming white Gaussian additive noise, the cost function of MLE is expanded to the cost function of NLSE. Efficient and practical approach for Doppler frequency tracking by the MLE is derived based on the assumption of code-free signals, i.e., the cost function of the MLE for carrier Doppler tracking is used to derive a discriminator function to create error signals from incoming and reference signals. The use of the MLE method for carrier tracking makes it possible to generalize the MLE equation for arbitrary codes and modulation schemes. This is ideally suited for various GNSS signals with same structure of tracking module. This paper proposes two different types of MLE based tracking method, i.e., an iterative batch processing method and a non-iterative feed-forward processing method. The first method is derived without any limitation on time consumption, while the second method is proposed for a time limited case by using a 1st derivative of cost function, which is proportional to error signal from discriminators of conventional tracking methods. The second method can be implemented by a block diagram approach for tracking carrier phase, Doppler frequency and code phase with assuming no correlation of signal parameters. Finally, a state space form of FLL/PLL/DLL is adopted to the designed MLE based tracking algorithm for reducing noise on the estimated signal parameters.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.4
• /
• pp.953-959
• /
• 1998

To investigate accuracy of intensity method for measurement of the fiber orientation distribution, fiber orientation function is calculated by drawing simulation figures for the fiber orientation as varying fiber aspect ratio, fiber area ratio, and fiber orientation state, respectively. The values of fiber orientation function measured by intensity method are compared with the calculated values of fiber orientation function. The results show that measurement accuracy of the fiber orientation angle distribution by intensity method is affected by the fiber aspect ratio when the total length of oriented fiber is same. The average gradient of fiber orientation function is 0.94 for 1000mm of the total fiber length and is 0.93 for 2000 mm when the fiber aspect ratio is over 50. Measurement accuracy by intensity method is about 94% and the reliable data can be obtained by intensity method.

• The Pure and Applied Mathematics
• /
• v.25 no.1
• /
• pp.17-29
• /
• 2018

We find modular equations of degree 3 to evaluate some new values of the cubic continued fraction $G(e^{-{\pi}\sqrt{n}})$ and $G(-e^{-{\pi}\sqrt{n}})$ for $n={\frac{2{\cdot}4^m}{3}}$, ${\frac{1}{3{\cdot}4^m}}$, and ${\frac{2}{3{\cdot}4^m}}$, where m = 1, 2, 3, or 4.

• MALSORI
• /
• no.25_26
• /
• pp.27-37
• /
• 1993

This paper deals with the nature and function of intensification in Korean in a wider scope of context which was not paid proper attention. Unobserved new areas of intensification are paid more attention like sound split of polysemy e.g. [s'eda], [kyongk'i] by n of intensification and north Korean application of intensification on [wonsu] and intensification of borrowed English. The recent phenomenon of 'gwua' intensification is experimented on two groups of people, young students and old people beyond 65 years old by means of sociolinguistic analysis. The result shows that its intensification is a form of student violent power and a mark of extreme solidarity among activist students. In conclusion, the nature of so called saisiot[t] e.g. intensification is voiceless tensed pause and its functions are the polarization of the original meaning of the word, sound split of polysemy and attachment of social values by intensification.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.4-5
• /
• 2001

Advent of lasers offering high intensity beam has opened the glass to the nonlinear optic (NLO). The high electric field associated with such laser beams can be so large that high order components of the glass polarization can be measured. Such development is of scientific and technological interests in particular in systems involving an intensity-dependent refractive index and/or ultra-fast response (＜10$\^$-12/s). From a scientific viewpoint the NLO response intensity must be understood as a function of the glass composition. On the other hand, large family of applications are presently under investigation in various fields of optical materials or systems e.g. laser glasses for fusion energy, soliton propagation for ultra-long distances, ultra-fast-switching, optical storage etc....(omitted)