• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.325-333
• /
• 2016

본 연구는 솔더링 시스템에서 세라믹 인두기의 온도 제어를 위한 제어기 설계 알고리즘을 제안하고, 제어 실험으로 그 유효성을 보였다. 솔더링 시스템의 세라믹 인두기 온도 응답 특성이 매우 느리며 제어 입력에 비선형인 특성을 갖고 있어 정밀한 모델링과 제어기 설계에 어렵다. 본 연구에서는 전제부 변수가 제어 입력이고 결론부가 전달함수인 퍼지 규칙들로 구성된 TSK 퍼지 모델로 세라믹 인두기 온도 특성을 표현하였다. 퍼지 모델 결론부의 전달함수는 계단 입력 응답으로부터 구한다. 세라믹 인두기 온도 응답 특성이 매우 느리므로 완전한 계단 입력 응답을 구하기가 어렵다. 불완전한 계단 입력 응답으로 전달함수를 구하는 방법으로 유전적 알고리즘(GA)을 사용하는 것을 제안하며, 예제들로 제안한 그 유효성을 보였다. 또한 TSK 퍼지 모델로부터 퍼지 제어기를 설계하는 방법도 제안하며 그 유효성을 예제 시뮬레이션으로 확인하였다. 제안한 방법들을 세라믹 인두기 온도 제어에 적용하여 실험 하였다. 퍼지 모델의 규칙은 7개로 구성되었으며 퍼지 제어기의 결론부는 PI 제어기로 하였다. 제안한 퍼지 제어기의 실험 결과는 선형 제어기보다 우수하였으며 퍼지 PID 제어기를 사용한 기존 연구 결과에 못지않았다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.211-214
• /
• 2000

The conventional PI controller has been widely used in industrial application due to the simple control algorithm. But it is very difficult to find the optimal PI control gain. Therefore in this paper to obtain optimal performance fuzzy proportional-plus-integral controller for the vector control system of an induction machine is presented. The simulation model is created in MATLAB/SIMULINK. The simulation results demonstrate the good performance of this system.

• 산업기술연구
• /
• 제13권
• /
• pp.43-48
• /
• 1993

In this paper, a new PID fuzzy controller (FC) is presented. The linguistic control rules of PID FC is separated into two parts : one is $e-{\Delta}e$ part, and the other is ${\Delta}^2e-{\Delta}e$ part. And then two FCs employing these rule base indivisually are synthesized. The control input to the process is decided by taking weighted mean of the outputs of two FCs. The proposed PID FC improve the transient response of the system and gives better performance than the conventional PI FC.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.125-130
• /
• 1998

This paper presents a speed control for ultrasonic motors using a PI controller and disturbance torque observer. Since the PI gains and the observer's poles are generally fixed, the control performance deteriorates when the driving conditions vary much. Therefore, we propose the speed control scheme that the PI gains and the observer's poles are adjusted on-line in accordance with the speed ripple using fuzzy reasoning.

• 제어로봇시스템학회논문지
• /
• 제7권8호
• /
• pp.680-688
• /
• 2001

In this paper, the fuzzy control with variable input gain is applied to maintain the consistent tension in the process of taking up and releasing texture. In the process of discharging web on one side rolling it on another, the take-up drum gets smaller on the release drum side as it gets bigger on the rolling side, thus it is necessary to change the balance of velocity between the sides. In order to solve the problem a tension controller is necessary. The PI control method has been employed to maintain the consistent tension, but the PI control method produces a problem which requires an experienced worker with the traits of the machine, in order to perform the fine adjustments according to the environment of the process. For solving the above problem, we apply fuzzy control to the tension system, in order to produce a uniform roll. For the performance test, the fuzzy controller does not need to revise the parameters. Therefore the fuzzy controller exhibits an excellent additivity for the tension system where the system is changed with time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.997_998
• /
• 2009

Nowadays DC-DC converter has been used widely in electronic production. It has a high requirement in wide input voltage, load variations, stability, providing a fast transient response and the most important thing is that it can be applied easily and efficiently. However, it is not easy to be controlled because of nonlinear system. This study introduces a fuzzy linear control design method for nonlinear systems with optimal $H^{\infty}$ robustness performance. First, the Takagi and Sugeno fuzzy linear model is employed to approximate a nonlinear system. Next, based on the fuzzy linear model, a fuzzy controller is developed to stabilize the nonlinear system, and at the same time the effect of external disturbance on control performance is attenuated to a minimum level. Thus based on the fuzzy linear model, ��$H^{\infty}$ performance design can be achieved in nonlinear control systems. Linear matrix inequality (LMI) techniques are employed to solve this robust fuzzy control problem. PI control structure is used and the control gains are determined based on $H^{\infty}$ control.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.299-308
• /
• 1998

본 논문에서는 신뢰할 수 있는 SRM 구동시스템과 기존의 PI제어기에 4개의 규칙으로 이루어진 FLM(Fuzzy Logic Modifier)를 제안하였다. 저가격 원칩 마이크로컨트롤러인 인텔사의 i80C196KC는 속도 제어기와 초기 기동을 포함한 SRM 구동 컨트롤러를 설계하기 위해 사용되었다. 폐루프 시스템에 안정된 효과를 보이는 FLM을 Pl 제어기에 추가함으로써 부적절하게 설정된 PI 제어기의 이득값에 대해 강인한 제어성능을 보인다. 시뮬레이션 및 실험결과는 6/4극 SRM에 대해 제안된 제어 방식이 우수함을 보여준다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2120-2122
• /
• 2002

There are several types of control systems that use fuzzy logic controller as a essential system component. The majority of research work on fuzzy PID controller focuses on the conventional two-input PI or PD type controller. However, fuzzy PID controller design is a complex task due to the involvement of a large number of parameters in defining the fuzzy rule base. In this paper we combined conventional PI type and PD type fuzzy controller and set the initial parameters of this controller from the conventional PID controller gains obtained by Ziegler-Nichols tuning or other coarse tuning methods. After that, by replacing some of these parameters with sing1e neurons and making them to be adjusted by back-propagation learning algorithm we designed a neuro-fuzzy controller which showed good performance characteristics in both computer simulation and actual application.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.914-921
• /
• 2011

Commencing with incandescent light bulbs, every load today creates harmonics. Unfortunately, these loads vary with respect to their amount of harmonic content and their response to problems caused by harmonics. The prevalent difficulties with harmonics are voltage and current waveform distortions. In addition, Electronic equipment like computers, battery chargers, electronic ballasts, variable frequency drives, and switching mode power supplies generate perilous amounts of harmonics. Issues related to harmonics are of a greater concern to engineers and building designers because they do more than just distort voltage waveforms, they can overheat the building wiring, cause nuisance tripping, overheat transformer units, and cause random end-user equipment failures. Thus power quality is becoming more and more serious with each passing day. As a result, active power filters (APFs) have gained a lot of attention due to their excellent harmonic compensation. However, the performance of the active filters seems to have contradictions with different control techniques. The main objective of this paper is to analyze shunt active filters with fuzzy and pi controllers. To carry out this analysis, active and reactive current methods ($i_d-i_q$) are considered. Extensive simulations were carried out. The simulations were performed under balance, unbalanced and non sinusoidal conditions. The results validate the dynamic behavior of fuzzy logic controllers over PI controllers.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.787-799
• /
• 2012

Real and reactive power flows on a transmission line interact inherently. This situation degrades power flow controller performance when independent real and reactive power flow regulation is required. In this study, a quasi multi-pulse interline power flow controller (IPFC), consisting of eight six-pulse voltage source converters (VSC) switched at the fundamental frequency is proposed to control real and reactive power flows dynamically on a transmission line in response to a sequence of set-point changes formed by unit-step reference values. It is shown that the proposed hybrid fuzzy-PI commanded IPFC shows better decoupling performance than the parameter optimized PI controllers with analytically calculated feed-forward gains for decoupling. Comparative simulation studies are carried out on a 4-machine 4-bus test power system through a number of case studies. While only the fuzzy inference of the proposed control scheme has been modeled in MATLAB, the power system, converter power circuit, control and calculation blocks have been simulated in PSCAD/EMTDC by interfacing these two packages on-line.