• 정보처리학회 논문지
• /
• 제13권2호
• /
• pp.13-17
• /
• 2024

본 논문에서는 규칙의 수를 줄여 간결한 지식 기반을 보장할 수 있는 합 기반의 전건부를 가지는 뉴로-퍼지 제어기를 제안하였다. 제안된 뉴로-퍼지 제어기는 모든 입력 변수의 AND 조합을 전건부로 하는 구조의 퍼지 규칙보다 더 큰 입력 영역을 커버하기 위해 전건부에 입력 퍼지 집합의 합집합 연산을 허용하였다. 이러한 뉴로-퍼지 제어기를 구성하기 위해 본 논문에서는 OR 및 AND 퍼지 뉴런으로 구성된 multiple-term unified logic processor (MULP)를 고려하였다. 이러한 OR 및 AND 퍼지 뉴런은 조정 가능한 연결 강도 집합을 가지므로 학습을 통하여 최적의 연결 강도 집합을 찾을 수 있다. 초기 최적화 단계에서 유전 알고리즘은 제안된 뉴로 퍼지 제어기의 최적화된 이진 구조를 구성하고, 이후 확률에 기반한 강화 학습은 성능 지수를 더욱 향상시켜서 유전 알고리즘에 의해 최적화된 제어기의 이진 연결을 개선하였다. 역진자 시스템을 제어하기 위한 모의실험 및 실험을 통해 제안된 방법의 유효성을 검증하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 추계학술대회 학술발표 논문집
• /
• pp.50-54
• /
• 1997

In general, the design of fuzzy logic controller has difficulties in the acquisition of expert's knowledge. So, some methods that can optimize the parameters for fuzzy logic controller automatically without expert knowledge was provided. Recently, tuning method for fuzzy logic controller using genetic algorithm(GA) were proposed in many papers. However, those are tuning methods for a part or some part of fuzzy logic controller. In this paper, we proposes auto tuning method for the whole part of tuzzy logic controller, such as parameters of membership functions for antecedence and consequence parts, rule base, scaling factor and the number of rule. Finally, second order dead time plant is provided to show the advantages of the proposed method.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권2호
• /
• pp.145-152
• /
• 1999

This paper presents an optimal design method for fuzzy logic controllers using genetic algorithms. In general, the design of fuzzy logic controllers has difficulties in the acquisition of exper's knowledge and relies to a great extent on empirical and heuristic knowledge which, in many cases, cannot be objectively justified. So, the performance of the controller can be degraded in the case of plant parameter variations or unpredictable incident which the designer may have ignored, and parameters of the fuzzy logic controller obtained by expert's control action may not be global. To solve these problems, the proposed method using genetic algorithms in this paper, can tune the parameters of fuzzy logic controller including scaling factors and determine the appropriate number of fuzzy reles systematically and automatically. We provide the second drder dead time plant and inverted pendulum system to evaluate the feasibility and generality of our proposed method. Comparison shows that the proposed controller can producd higher accuracy and a smaller number of fuzzy rules than manually tuned fuzzy logic controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2458-2460
• /
• 2000

The goal of crane control system is transporting heavy objects to a target position as fast as possible without rope oscillation. This paper presents a GA-based fuzzy logic controller for crane system. GA is going to decide membership functions, instead of an expert. In this paper, The centers and widths of the membership function of the fuzzy sets defined over the input space, the orders and parameters of subsystems in the consequence parts are adjusted by a genetic algorithm. The effectiveness of the proposed method is verified by simulation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권11호
• /
• pp.599-609
• /
• 2000

The new design methodology of a hybrid fuzzy controller by means of the genetic algorithms is presented. First, a hybrid fuzzy controller(HFC) related to the optimal estimation of control parameters is proposed. The control input for the system in the HFC combined PID controller with fuzzy controller is a convex combination of the FLC's output and PID's output by a fuzzy variable, namely, membership function of weighting coefficient. Second, an auto-tuning algorithms utilizing the simplified reasoning method and genetic algorithms is presented to automatically improve the performance of hybrid fuzzy controller. Especially, in order to auto-tune scaling factors and PID parameters of HFC using GA, three kinds of estimation modes such as basic, contraction, and expansion mode are effectively utilized. The proposed HFC is evaluated and discussed to show applicability and superiority with the and of three representative processes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.137-139
• /
• 2001

In this paper, we design a GA-fuzzy precompensator for enhancement of power system stability. Here, a fuzzy precompensator is designed as a fuzzy logic-based precompensation approach for Power System Stabilizer(PSS). This scheme is easily implemented simply by adding a fuzzy precompensator to an existing PSS. And we optimize the fuzzy precompensator with a genetic algorithm for complements the demerit such as the difficulty of the component selection of fuzzy controller, name1y, scaling factor, membership function and control rules. Simulation results show that the proposed control technique is superior to a conventional PSS in dynamic responses over the wide range of operating conditions and is convinced robustness and reliableness in view of structure.

• 지능정보연구
• /
• 제17권2호
• /
• pp.1-22
• /
• 2011

본 논문에서는 선행제약순서결정문제(Sequencing problem with precedence constraints, SPPC)를 효과적으로 해결하기 위한 적응형 유전알고리즘(Adaptive genetic algorithm, aGA)을 제안한다. aGA에서 는 SPPC를 효과적으로 표현하기 위해 위상정렬에 기초한 표현절차(topological sort-based representation procedure) 를 사용한다. 제안된 aGA는 퍼지로직제어를 이용한 적응형구조를 가지고 있으며, 유전 탐색과정을 통해 교차변이 연산자(Crossover operator)의 비율을 적응적으로 조절한다. 수치예제에서는 다양한 형태의 SPPC를 제시하였으며, 그 실험결과는 제안된 aGA가 기존의 알고리즘보다 우수함을 보여주었다. 결론적으로 말하자면 본 논문에서는 제안된 aGA가 다양한 형태의 SPPC에서 최적해 혹은 최적순서를 발견하는데 아주 효과적이라는 것을 밝혔다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1703_1704
• /
• 2009

Fuzzy neural ship controllers is used in ship steering control. It can make full use of the advantage of all kinds of intelligent algorithms. This provides an efficient way for this paper. An RBF neural network and GA optimization are employed in a fuzzy neural controller to deal with the nonlinearity, time varying and uncertain factors. Utilizing the designed network to substitute the conventional fuzzy inference, the rule base and membership functions can be auto-adjusted by GA optimization. The parameters of neural network can be decreased by using union-rule configuration in the hidden layer of the network. The ship control quality is effectively improved in case of appending additional sea state disturbance. The performance of controller is evaluated by the system simulation using simulink tools.

• International Journal of Control, Automation, and Systems
• /
• 제2권3호
• /
• pp.362-373
• /
• 2004

In this study, we introduce a noble neurogenetic approach to the design of the fuzzy controller. The design procedure dwells on the use of Computational Intelligence (CI), namely genetic algorithms and neurofuzzy networks (NFN). The crux of the design methodology is based on the selection and determination of optimal values of the scaling factors of the fuzzy controllers, which are essential to the entire optimization process. First, tuning of the scaling factors of the fuzzy controller is carried out, and then the development of a nonlinear mapping for the scaling factors is realized by using GA based NFN. The developed approach is applied to an inverted pendulum nonlinear system where we show the results of comprehensive numerical studies and carry out a detailed comparative analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.53-60
• /
• 2000

In this paper, we design a GA-fuzzy controller for position control and anti-swing at the destination point. A genetic algorithm is used to complement the demerits such as the difficulty of the component selection of the fuzzy controller, namely, scaling factors, membership functions and control rules. Lagrange equation is used to represent the motion equation of trolley and load in order to obtain mathematical modelling. Simulation results show that the proposed control technique is superior to a conventional optimal control in destination point moving and modification.