• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2003년도 춘계학술대회 발표 논문집
• /
• pp.74-79
• /
• 2003

This paper is concerned with the estimation of a wafer part in grasping system. The estimation of a wafer size in grasping system is very important because a wafer must be placed in accurate position. The accurate information of a wafer size should be forward to Robot in order to place a wafer in accurate position. So in this paper, we decide the size of a wafer with Fuzzy Logic and consider the possibility of this method by simulation.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
• /
• pp.127-129
• /
• 2002

In order to predict the moldability of an injection molded part, a simulation of filling is needed. Short shot is one of the most frequent troubles encountered during injection molding process. The adjustment of process conditions is the most economic way to troubleshoot the problematic short shot in cost and time since the mold doesn't need to be modified at all. But it is difficult to adjust the process conditions appropriately in no times since it requires an empirical knowledge of injection molding. In this paper, the intelligent CAE system synergistically combines fuzzy-neural network(FNN) for heuristic knowledge with CAE programs for analytical knowledge. To evaluate the intelligent algorithms, a cellular phone flip has been chosen as a finite element model and filling analyses have been performed with a commercial CAE software. As the results, the intelligent CAE system drastically reduces the troubleshooting time of short shot in comparison with the expert's conventional way which is similar to the golden section search algorithm.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.110-123
• /
• 2005

This paper proposes an intelligent method for the optimal load distribution of two cooperating robots(TCRs) using fuzzy logic. The proposed scheme requires the knowledge of the robots' dynamics, which in turn depend upon the characteristics of large flat panel displays(LFPDs) carried by the TCRs. However, the dynamic properties of the LFPD are not known exactly, so that the dynamics of the robots, and hence the required joint torque, must be calculated for nominal set of the LFPD characteristics. The force of the TCRs is an important factor in carrying the LFPD. It is divided into external force and internal force. In general , the effects of the internal force of the TCRs are not considered in performing the load distribution in terms of optimal time, but they are essential in optimal trajectory planning: if they are not taken into consideration, the optimal scheme is no longer fitting. To alleviate this deficiency, we present an algorithm for finding the internal-force factors for the TCRs in terms of optimal time. The effectiveness of the proposed system is demonstrated by computer simulations using two three-joint planner robot manipulators.

• 한국컴퓨터정보학회논문지
• /
• 제11권4호
• /
• pp.47-54
• /
• 2006

교통사고를 줄이기 위해서, 많은 연구원이 교통사고 예측 모형을 연구하고 있다. 교통사고의 원인으로는 교차로 신호주기가 잘못 산출되거나 교차로 설계가 잘못된 경우가 많다. 그러므로, 정확하게 교통사고 원인을 분석하려면 많은 노력이 필요하다. 본 논문에서는 교차로 조건 및 날씨조건을 고려하여 최적 자동차 안전 속도를 실시간으로 산출하고자한다. 특별히, 비가 오거나 눈이 오는 경우에는 자동차 속도를 1/3이상 감속해야 된다. 그러나, 기존의 속도표지판은 기상조건이 바뀌어도 항상 같은 제한 속도를 표시하는 문제점이 있다. 본 논문에서는 이러한 문제점을 해결하기 위해서 날씨조건과 도로조건을 이용한 최적 안전속도 산출 알고리즘을 제시한다. 컴퓨터 모의실험결과, 지능형 교통사고 예측알고리즘이 교통 제한속도를 정확하게 산출할 수 있음을 입증했다.

• International journal of advanced smart convergence
• /
• 제9권4호
• /
• pp.62-73
• /
• 2020

In this paper, we present electronic acupuncture needles we have developed using intelligence technology based on Bluetooth in order to allow anyone to simply receive customized remote diagnosis and treatment by clicking on the menu of the smartphone regardless of time and place. In order to determine the health condition and disease of patients, we have developed a software and a hardware of electronic acupuncture needles, operating on Bluetooth which transmits biometric data to oriental medical doctors using the functions of automatically determining pulse diagnosis, tongue diagnosis, and oxygen saturation; the functions are most commonly used in herbal treatment. In addition, using fuzzy logic and reasoning based on smartphones, we present in this paper an algorithm and the results of completion of hardware implementation for electronic acupuncture needles, appropriate for the body conditions of patients; the algorithm and the hardware implementation are for a treatment time duration by electronic acupuncture needles, an automatic determinations of pulse diagnosis, tongue diagnosis, and oxygen saturation, a function implementation for automatic display of acupuncture point, and a strength adjustment of electronic acupuncture needles. As a result of our simulation, we have shown that the treatment of patients, performed using an Electronic Acupuncture Needles based on intelligence, is more efficient compared to the treatment that was performed before.

• 반도체디스플레이기술학회지
• /
• 제4권3호
• /
• pp.29-33
• /
• 2005

As the integrated devices become more and more sophistcated, the diameter of wafers increased up to 300 mm and strict level of cleaning is necessary to remove the particulates on the surface of wafer. Therefore we need a new type of wet-station which can reduce DI water and chemical in the cleaning process. Moreover, it is important to control the temperature and the concentration of chemical in the wet-station. In the conventional chemical supply system, it is difficult not only to fit the mixing rate of chemicals in cleaning process, but also to fit the quantity and temperature. Thus, we propose a new chemicals supply system, which overcomes above problems by the analysis of fluid and thermal transfer on chemical supply system.

• 소음진동
• /
• 제6권3호
• /
• pp.325-332
• /
• 1996

One of the greatest shortcoming in today's predictive maintenance program is the ability to diagnose the mechanical and electrical problems within the machine when the vibration exceeds preset overall and spectral alarm levels. In this study, auto-diagnosis system is constructed by using A/D converter to convert analog to digital singal. With this device the system analyses input signal to diagonosis machine condition. Many plots, which display machine condition, and input values of every channel are calculated in this system. If the falut is found, the system diagnoses automatically using fuzzy algorithm and trend monitoring. Prediction is also performed by the grey system theory. Operator finds out eh machine operating condition intuitively based on with personal computer CRT in using this system.

• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.215-221
• /
• 2010

This paper introduces development of location estimation and navigation system of mobile robots using USN and LEGO Mindstorms NXT. Developed system includes location estimation, location and navigation information display and navigation control parts. It used ZigBee based USN which was built with CC2431 chip to locate blind node and implemented fuzzy model to improve ability of calculation of distances from reference nodes and location of mobile robots. This paper proposed combination method of location estimation using USN and encoder which is built in motors of mobile robots. Experimental results showed proposed method is superior to the method which used USN only in location estimation and navigating robots. Developed system can locate current position of mobile robots and monitor information from sensor nodes like temperature, humidity and send control signal to mobile robot to move.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.670-684
• /
• 2014

Ship Information Systems (SISs) have been one of the main research focuses in ship design and become a multidisciplinary area. With these growing research trends, it is important to consolidate the latest knowledge and information to keep up with the research needs. In this paper, the SIS and its different forms are introduced and discussed. The beginning of this paper discusses the history and evolution of SIS. The next part of this paper focuses on different fields and research areas such as networking technology, information fusion, information decision, message display, ship control in real-time SISs. A Semi-Physical Simulation Platform (SPSIM) designed for SIS research and its running effect through a new Fuzzy-PID fusion algorithm are introduced in this paper then. A brief literature survey and possible future direction concerning each topic is included.

• 대한인간공학회지
• /
• 제6권2호
• /
• pp.19-28
• /
• 1987

If an error occurs in the automatic mode when the advanced teleoperator system performs a task in hostile environment, then the mode changes into the manual mode. The operation by program and the operation by hyman recover the error in the manual mode. The system resumew the automatic mode and continues the given task. In order to utilize the inverse kinematics as means of the operation by program in the manual mode, Lee and Nagamachi determined the end point of the robot trajectory planning which varied with the height of the task object recognized by a T.V monitor, solved the end point by the fuzzy set theory, and controlled the position of the robot hand by the inverse kinematics and the posture of the robot hand by the operation by human. But the operation by human did take a lot of task time because the position and the posture of the robot hand were separately controlled. To reduce the task time by human, this paper developes an error recovery expert system (ERES). The position of the robot hand is controlled by the inverse kinematics of the cartesian coordinate system to the end point which is deter- mined by the fuzzy set theory. The posture of the robot hand is controlled by the modulality of the robot hand's motion which is made by the posture of the task object. The knowledge base and the inference engine of the ERES is developed using the muLISP-86 language. The experimental results show that the average task time by human the ERES which was performed by the integration of the position and the posture control of the robot hand is shorter than that of the research, done by the preliminary experiment, which was performed by the separation of the position and the posture control of the robot hand. A further study is likely to research into an even more intelligent robot system control usint a superimposed display and digitizer which can present two-dimensional coordinate of the work space for the convenience of human interaction.