• 한국지능시스템학회논문지
• /
• 제4권1호
• /
• pp.24-34
• /
• 1994

A RMFSOC(Reference Model Following Self-Organizing Fuzzy Logic Controller) is propose in this paper. In the RMFSOC, the refernce model is introduced, where the desired control performance can be specified by an operator of the controlled process. The self-organizing level of the RMFSOC organizes the control rules of FLC which make the process output follow the reference model output. In addition, for the use of preventing improper modifications of control rules, a complementary decission rule is induced from the possible relations between the process output and reference model output. Through a simulation study, it is shown that the robustness of the control system using the proposed RMFSOC to the set-point changes and distur bances can be greatly improved being conpared with that of the control system using the Procyk and Mamdani's SOC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1079-1082
• /
• 1996

To automate an excavator the control issues resulting from environmental uncertainties must be solved. In particular the interactions between the excavation tool and the excavation environment are dynamic, unstructured and complex. In addition, operating modes of an excavator depend on working conditions, which makes it difficult to derive the exact mathematical model of excavator. Even after the exact mathematical model is established, it is difficult to design of a controller because the system equations are highly nonlinear and the state variable are coupled. The objective of this study is to design a fuzzy logic controller(FLC) which controls the position of excavator's attachment. This approach enables the transfer of human heuristics and expert knowledge to the controller. Excavation experiments are carried out to check the performance of the FLC.

• 융합신호처리학회논문지
• /
• 제3권4호
• /
• pp.42-48
• /
• 2002

플랜트 모델이나 경험에 근거하여 설계된 퍼지제어기를 실제 플랜트에 적용할 경우, 모델링 오차와 플랜트에 대한 관련지식의 부족으로 만족할 만한 제어 결과를 나타내지 못할 경우가 있다 이 경우 제어성능을 향상시키기 위해 제어기의 제어인자를 다시 조정하여야 하고, 이 조정과정은 시행착오방법으로 수행되기 때문에 많은 시간과 비용을 필요로 한다. 본 논문에서는 퍼지 논리와 정규화에 따라 스케일 계수를 자동조정하는 퍼지 제어기를 제안한다 모의 실험을 통하여 스케일 계수가 자동조정되는 퍼지제어기가 스케일 계수가 고정된 퍼지 제어기보다 좋은 성능을 보임을 확인하였다. 그리고 DSP 프로세서를 사용하여 설계한 제어기를 구현한 후 실험결과를 관측하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 추계학술대회
• /
• pp.273-274
• /
• 2011

최근에는 풍속변화에 대응하여 최대전력을 발생할 수 있는 가변속 풍력발전 시스템에 대한 연구가 활발히 진행 중이며 국내의 지형적 조건에 따른 바람의 영향으로 풍력발전 시스템의 MPPT제어가 반드시 필요하다. 종래의 풍력발전 MPPT 제어는 풍속변화에 대한 응답속도 등에 대한 문제점이 나타난다. 따라서 본 논문에서는 파라미터 변동에 대해 강인성 제어가 가능한 FLC(Fuzzy Logic Control)을 기반으로 한 풍력발전시스템의 MPPT 제어를 제안하고, 시뮬레이션 결과를 통하여 타당성을 입증한다.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1234-1243
• /
• 1992

본 연구에서는 국부적인 퍼지제어 셀(fuzzy control cell:cell)을 도입하여 계산량 감소를 달성하고, 추론과정을 선형근사화한 조직적인 설계를 통하여 선형제어 이론을 FLC의 실용적인 면에 접목하고자 한다. 이를 위하여, 확률밀도함수 형태의 멤버쉽함수(membership function)와 선형화된 제어공간이 얻어지도록 전반적인 제어방 책을 결정한 다음, 주어진 상태에 가장 지배적(dominant)인 규칙을 갖는 몇 개의 대표 점을 찾아서 그 점들로 구성된 퍼지제어 셀을 생성하고, 퍼지연산을 생성된 셀에서만 수행하여 알고리즘과 계산을 단순화시킨다. 평가기준을 공평함에 두어서 조건부연결 어 'AND'에 T-norm인 대수곱을 적용하여 적합도를 취하고, 규칙들의 작용이 병렬발화 라는 관점으로 규칙연결어 'ALSO'는 'AND'의 공액인 'OR'에 해당되는 대수합연산 대신 에 확률측도와 유사한 산술평균을 적용하여 퍼지추론을 한다. 그리고, 각각의 제어 규칙에 대하여 퍼지추론한 결과와 그것의 평균중심을 곱하여 통합한 후, 무게중심법으 로 역퍼지화하여 일반화된 제어값을 얻는다. 이 값을 PID제어기를 이용하여 구현한 디지틀 보상기를 통과시켜 시스템에 한 제어를 얻는 조직적인 방법을 제안한다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.191-196
• /
• 1998

A new Fuzzy Logic Controller(FLC) called a Gradient-Descent Based Self-Organizing Controller is presented. The Self-Organizing Controller(SOC) has two inputs such as error and change of error, and updates control rules with monitoring a performance measure. There are many works in the SOC which concentrate on the self-organizing ability in control rule base, but have a few research on the performance measure which is akin to sliding mode control. With this procedure, we can get a robust performance measure on the SOC. To verify the perfomance of proposed controller, we have performed for the cart-pole system which is one of the well-known benchmark problem in the control literature.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.69-76
• /
• 2003

In this paper, a novel speed control system that implements the fuzzy logic controller(FLC) is proposed. Fuzzy controller is shown more excellent efficency than a conventional controllers in the strength aspect and non-linear controller using IF-THEN rule which can control without process the accurate mathematical modeling about induction motor. But we cannot expect that conventional fuzzy controller divide equally the space of input and output parameter and use the certain shape of triangle membership function. Therefore to develop the efficiency of conventional fuzzy controller, We need to scale the range of membership functions. In this study, proposed fuzzy controller has the ability controlling scale of membership functions using by output scaling factor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.303-307
• /
• 2004

This paper presents a new speed control scheme of the spindle induction motor (IM) using fuzzy-logic control in field weakening region. The implementation of the proposed FLC-based spindle IM are investigated and compared to those obtained from the conventional PI controller based drive system, we have confirmed good simulation and experimental results at different dynamic operating conditions such as sudden change in command speed, step change, etc.

• 한국해양공학회지
• /
• 제35권5호
• /
• pp.360-368
• /
• 2021

The need for energy harvesting in marine environments is gradually increasing owing to the energy limitation of marine robots. To address this problem, a catamaran-type sail drone (CSD), which can harvest marine energies such as wind and solar, was proposed in a previous study. However, it was designed and manufactured without considering the stability, optimal hull-form, and maintenance. To resolve these problems, a CSD with two keels, a performance estimator, V-shape hulls, and modularized components is proposed and its mechanism is developed in this study. To verify the performance of the CSD, the performance estimation using smoothed-particle hydrodynamics (SPH) and the heading control using fuzzy logic controller (FLC) are performed. Simulation results show the attitude stability of the CSD and the experimental results show the straight path of the CSD according to wind conditions. Therefore, the CSD has potential applications as an energy harvesting system.

• 조명전기설비학회논문지
• /
• 제25권9호
• /
• pp.33-43
• /
• 2011

Since the fuzzy neural network(FNN) is universal approximators, the development of FNN control systems have also grown rapidly to deal with non-linearities and uncertainties. However, the major drawback of the existing FNNs is that their processor is limited to static problems due to their feedforward network structure. This paper proposes the recurrent FNN(RFNN) for high performance and robust control of SynRM. RFNN is applied to speed controller for SynRM drive and model reference adaptive fuzzy controller(MFC) that combine adaptive fuzzy learning controller(AFLC) and fuzzy logic control(FLC), is applied to current controller. Also, this paper proposes speed estimation algorithm using artificial neural network(ANN). The proposed method is analyzed and compared to conventional PI and FNN controller in various operating condition such as parameter variation, steady and transient states etc.