• 한국정밀공학회지
• /
• 제26권12호
• /
• pp.69-77
• /
• 2009

In this study an ANFIS-based trajectory tracking motion control algorithm is proposed for autonomous garage and parallel parking of a model car. The ANFIS controller is trained off-line using data set which obtained by Mandani fuzzy inference system and thereby the processing time decreases almost in half. The controller with a steering delay compensator is tuned through simulations performed under MATLAB/Simulink environment. Experiments are carried out with the model car for garage and parallel parking. The experimental results show that the trajectory tracking performance is satisfactory under various initial and road conditions

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.606-608
• /
• 1997

In this paper, Neuro-Fuzzy Controller(NFC), a fuzzy system realized using a neural network, is to adopt for the multivariable system. In the multivariable system, the interactive effects between the variables should be taken into account. A simple compensator, using the steady-state information can be obtained for open-loop stable systems, is presented to cope with this problem. However, it should be supposed that the plant is unknown to the control system designer, but an estimate of the DC gain has been obtained by carrying out experiments on the plant. Also, if the variables are not combinated completely, it is difficult to design the controller. Therefore, we design a neuro-fuzzy controller which controls a multivariable system with only input output informations, and compare its performance with that of a PI controller. In the proposed controller, the construction of the membership functions and rule base, which is highly heuristic, can be achieved using a training process. This allows the combination of knowledge of human experts and evidence from input-output data.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권2호
• /
• pp.113-118
• /
• 2010

This paper proposed an ECAM (Electronic cam) control system which has simple and general structure. The proposed cam controller adopted the linear and polynomial curve-fitting method to generates a smooth cam profile curve function. Smooth motion trajectory of master actuator guarantees the good performance of slave motion and has an important effect on the interpolation quality of ECAM. The auto-tuning PID velocity controller was applied to overcome the uncertainties in ECAM, and the gains of the controller are updated continuously to ensure the consistency of system performance under varying working conditions. The robustness of system against the varying load torque disturbances and noises is guaranteed by using the load torque disturbance observer to suppress the disturbance on master actuator. The velocity compensator was applied to compensate the degradation of performance of slave motion caused from the varying driving speed of master motion. The stability and validity of the proposed ECAM control system was verified by simulation results.

• 조명전기설비학회논문지
• /
• 제15권4호
• /
• pp.14-22
• /
• 2001

본 논문에서는 전력계통의 저주파 진동 억제와 안정도 향상을 위해 적응 뉴로-퍼지 전 보상기(Adaptive Neuro-Fuzzy Precompensator, ANFP)를 설계하였다. 여기서 ANFP는 종래의 전력계통 안정화 장치(Power System Stabilizer, PSS)를 보상하도록 설계되며, 이 설계기법은 기존의 PSS 최적 파라미터를 구하는 방식과는 달리 현재 사용중인 PSS 파라미터를 고정시켜놓고, ANFP만을 추가하는 구조적인 장점을 나타낸다. 먼저, 학습 능력을 가지는 퍼지 전 보상기가 구성되며, 이는 발전 유니트의 입출력 데이터로부터 학습된다. ANFP는 학습의 특성을 가지기 때문에 보상기의 퍼지규칙과 소속함수는 학습 알고리즘에 의해 자동으로 동조될 수 있다 학습은 ANFP와 목표 제어기(desired controller)의 출력을 비교하여 평가되는 오차를 최소화하도록 수행된다. 사례 연구 들에서 다양한 동작 조건들 상에서 전력계통의 우수한 제동을 제공할 수 있었으며, 시스템의 동특성을 향상시킬 수 있었다

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.399-405
• /
• 2007

This paper deals with the controller for a stable walking of a humanoid robot using genetic algorithm. A humanoid robot has instability during walking because it isn't fixed on the ground, and its nonlinearities of the joints increase its instability. If controller isn't robust, the robot may fall down at the ground during walking because of its nonlinearities. To solve this problem, robust controller is required to reduce the effect of nonlinearities and to gain the good tracking performance. In this paper, motion controller that is based on fuzzy-sliding mode controller is proposed. This controller can remove the effect of the saturation by limitation of the input voltage. It also includes compensator for reducing the effect of the nonlinearity by backlash and PI controller improving the tracking performance. In here, genetic algorithm is used for searching the optimal gains of the controller. From the given controller, a humanoid robot can moved more preciously. All the processes are investigated through simulations and are verified experimentally in a real joint system for a humanoid robot.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권9호
• /
• pp.1147-1153
• /
• 1999

The attitude control of a double inverted pendulum with a periodical disturbance at link top is dealt in this paper. The proposed system is consisted of the double inverted pendulum and a disturbing link; a triple inverted pendulum with two motors. The lower link is hinged on the plate to free for rotation in the vertical plane. The upper link is connected to the lower link through a DC motor. The DC motor is used to control the posture of the pendulum by adjusting the position of the upper link. The periodical disturbance can be generated by the additional like attached at the end of link 2 through another DC motor, which is the modeling of a posture for a biped supporting with one leg. The motor for the joint simulates the knee joint(or hip joint) and the disturbance for the legs moving in air. The algorithm for controlling the proposed inverted pendulum which is regarded as a virtual double inverted pendulum with a periodic disturbance, is consisted of a state feedback control and a fuzzy logic controller connected in parallel. The fuzzy controller keeps the center of gravity of the biped within the specified range through the nonlinear feedback compensator. The state feedback control takes over the role to maintain a desired posture regardless the disturbance at the link top. Simulations with a mathematical model and experiments are conducted to show the validity of the proposed controller.

• 융합신호처리학회논문지
• /
• 제13권4호
• /
• pp.233-237
• /
• 2012

본 논문에서는 RTDNN과 FLC를 이용해서 주신경망을 보상하는 제어시스템을 제안한다. 주신경망이 학습을 완료한 후 외란이나 부하변동이 생겨 오브 슛 내지는 언더 슛을 나타낼 때 적절히 조정하기 위해 퍼지 보상기를 사용하여 원하는 결과를 얻을 수 있도록 하였다. 그리고 제어대상의 역모델 신경망에서 학습시킨 결과를 이용하여 주신경망의 가중치를 변경시킴으로서 제어대상의 원하는 동적 특성을 얻게 된다. 모의 실험 결과 제안한 신경망 제어기의 양호한 응답 특성을 확인 할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2309-2311
• /
• 1998

The attitude control of a double inverted pendulum with a periodical disturbance at link top is dealt in this paper. The proposed system is consisted of the double inverted pendulum and a disturbance link. The lower link is hinged on the plate to free for rotation in the vertical plane. The upper link is connected to the lower link through a DC motor. The DC motor is used to control the posture of the pendulum by adjusting the position of the upper link. The periodical disturbance can be generated by the additional link attached at the end of link 2 through another DC motor, which is the modeling of a posture for a biped supporting with one leg. The motor for the joint simulates the knee joint(or hip joint) and the disturbance for the legs moving in air. The algorithm for controlling a proposed inverted pendulum is consisted of a state feedback control and a fuzzy logic controller. The fuzzy controller keeps the center of gravity of the biped within the specified range through the nonlinear feedback compensator. The state feedback control takes over the role to maintain a desired posture regardless the disturbance at the link top. In these case, the change of the angle and COG of an upper link is compensated with on-line. Simulations with a mathematical model are conducted to show the validity of the proposed controller.

• 한국지능시스템학회논문지
• /
• 제20권2호
• /
• pp.220-225
• /
• 2010

본 논문에서는 전력 품질 개선 및 전력 계통 신뢰도 향상을 위한 방안으로서 STATCOM 발전 시스템의 시스템 모델링 및 강인 안정성에 대한 연구를 수행하고자 한다. STATCOM은 복잡한 전력 계통을 안정화하고 공급전원을 일정하게 유지할 목적으로 제안된 기술이다. 기존의 전력 보상 장치에 비해 전력 제어 범위가 상당히 넓은 편이며, 시스템 구성요소가 비선형적 움직임을 보이고 있다. 또한, 외부 환경에 따른 파라미터 변동이 있기 때문에 시스템 제어를 위한 새로운 기법 마련이 필요하다. 이를 해결하기 위하여, 시스템을 퍼지 이론을 통해 접근하여 모델링을 수행하게 되며, 강인 안정도 해석을 통해 시스템의 불확실성 요소에 대한 대비를 하게 된다.

• 전자공학회논문지S
• /
• 제34S권4호
• /
• pp.12-24
• /
• 1997

An intelligent steering control system is designed for the steering control of a 4 wheel drive (4WD) electric vehicles without steering mechanism, where the vehicle is assumed to have 3 degree of freedom and input-output feedback linearization is employed. Especially, a fuzzy-rule-based side force estimator is suggested to avoid uncertain highlynonlinearexpression sof relations between side forces and their factors. Also, aneural-network-based predictive compensator is additionally utilized for the vehicle model to be correctly controlled with unstructured uncertainties. The proposed overall control system is numerically shown to be robust against drastic change of the external environments.