• International Journal of Safety
• /
• 제8권2호
• /
• pp.5-8
• /
• 2009

Fusing process of laser printer is the step to fuse toner on the paper and it has a great effect on fast printing speed, decrease in waiting time and improvement of printing quality. In order to improve the quality of fusing, a study on the fusion region is required. Recently, various researches are progressing in this field. In this study, the research about the temperature distribution of fusing region is performed through numerical analysis because fusing region is one of the important factors influencing fusing quality. According to results, it is ascertained that the temperature of fusing region is relative to velocity of the paper under print and has a regular distribution to width direction of the paper.

• Nuclear Engineering and Technology
• /
• 제9권1호
• /
• pp.7-13
• /
• 1977

후사 저밀도 polyethylene의 전기전도도와 온도특성을 중심으로 하여 조사해 보았다. 후사 polyethylene 시료에 대해서는 융점 이상까지 승온시켜 보면 가열 후의 log $\rho$-(equation omitted) 특성은 처음 가열과정에서 얻은 결과와는 전혀 다른 특성이 생겼으며 온도와 체적저항률과의 관계에서는 도약현상이 나타나고 온도에 의한 결정화도의 변화가 결정영역의 융해와 밀접한 관계가 있음을 구명하였다.

• International journal of advanced smart convergence
• /
• 제7권4호
• /
• pp.75-83
• /
• 2018

Predictive IoT Sensor Algorithm is a technique of data science that helps computers learn from existing data to predict future behaviors, outcomes, and trends. This algorithm is a cloud predictive analytics service that makes it possible to quickly create and deploy predictive models as analytics solutions. Sensors and computers collect and analyze data. Using the time series prediction algorithm helps to predict future temperature. The application of this IoT in industrial environments like power plants and factories will allow organizations to process much larger data sets much faster and precisely. This rich source of sensor data can be networked, gathered and analyzed by super smart software which will help to detect problems, work more productively. Using predictive IoT technology - sensors and real-time monitoring - can help organizations exactly where and when equipment needs to be adjusted, replaced or how to act in a given situation.

• 대한금속재료학회지
• /
• 제47권11호
• /
• pp.694-698
• /
• 2009

The $Co_{3}Ti$ phase hardens appreciably by the fine precipitation of disordered fcc Co-rich phase upon aging after quenching from solution annealing temperature. Transmission electron microscope (TEM) observations revealed that the precipitates are platelet in shape, lying nearly parallel to the {100} planes of the $Ll_{2}$-ordered matrix, and perfectly coherent with the matrix lattice at the beginning of aging. The high temperature strength increases appreciably with the fine precipitation of disordered Co-rich phase over the whole temperature range investigated. TEM observations of the under-aged and deformed alloys revealed that superdislocations are pinned by precipitates indicating an attractive interaction between dislocations and precipitates. In the over-aged state, thin twins are introduced in the fcc Co-rich precipitates during deformation.

• 정보과학회 논문지
• /
• 제44권4호
• /
• pp.411-416
• /
• 2017

적외선 표적의 정밀한 모델링을 위해서는 정확한 표면온도 계산이 필요하다. 본 논문에서는 전도, 대류, 복사를 고려한 복합 열해석 모듈을 소프트웨어로 구현하고, 이를 통하여 표적 재질 및 자세, 환경 요건에 따른 표적의 표면온도 해석을 수행 하였다. 구현된 결과는 상용 소프트웨어인 OKTAL-SE 와의 비교를 통하여 결과의 신뢰성을 검증하였다. 그 결과 자체 검증이 완료된 상용 소프트웨어인 OKTAL-SE 와 약 1% 이내의 오차를 보였다. 계산된 온도 결과를 바탕으로 적외선 표적 모델링을 수행하였으며 OKTAL-SE와의 연동을 통해 적외선 신호 해석을 수행하였다.

• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.206-214
• /
• 2013

There has been an increasing demand for high performance and energy-saving of blind. In order to develop the eco-friendly blind textiles, heat treatment process has been utilized for LM(Low Melting) polyester fabrics and the changes of the physical properties of the treated fabrics were examined according to temperature of heat treatment. Morphology, surface reflectance, contact angle, luster, thermal property and mechanical property of heat treated LM polyester fabrics were investigated. As results, morphology analysis of thermal treated fabrics confirmed that degree of fusion of LM polyester yarns improved with increase of temperature. Surface reflectance of thermal treated fabrics decreased with increase of temperature. Luster and contact angle of a water droplet on thermal treated fabrics increased slightly with increase of temperature. The mechanical properties of the fabrics by KES-FB system were found to be temperature-dependent and especially, bending and shear properties among them were highly related to temperature.

• 공업화학
• /
• 제32권5호
• /
• pp.547-555
• /
• 2021

본 연구에서는 촉매-플라즈마 반응기를 농산물(사과, 키위) 저장고에 적용하여 저장 중 발생되는 에틸렌을 제거하고자 하였다. 1 m³ 유닛 컨테이너 2개를 제작하여 에틸렌을 처리하지 않는 대조군과 발생하는 에틸렌을 촉매와 플라즈마에 의해 처리하는 실험군으로 구분하여 상온에서의 장기 저장성을 비교하였다. 또한 실험군에는 곰팡이 등의 세균 증식을 억제하기 위하여 소량의 오존을 주입하였다. 상온에서 사과와 키위를 각각 50 day와 57 day 동안 저장하여 에틸렌 농도 변화, 경도, 당도, 산도, 및 손실율을 비교하였다. 저장기간 동안의 에틸렌 농도 변화는 대조군이 실험군에 비해 높게 나타나 실험군에서 에틸렌이 효과적으로 제거되는 것으로 나타났다. 저장 후의 경도, 당도 및 당산비는 저장 전에 비해 좋게 나타났으며, 특히 키위가 사과에 비해 높게 향상하였다. 또한 저장 종료 후, 대조군에서 사과와 키위의 손실율은 각각 10%와 54.1%로 나타났으나, 실험군에서의 손실율은 각각 6%와 34.8%로 나타났다. 따라서 실험군의 저장성이 대조군에 비해 좋게 나타났다.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.79-86
• /
• 1995

The structural materials for cryogenic technology have been recently developed to support the many modern large-scale application from superconducting magnets for nuclear fusion reactor, magnetic levitation railway to LNG tankers. However it is pointed out that quenching phenomenon is one of the serious problems for the integrity of these applications, which is mainly attributed to the rapid temperature rising in the material due to some extrinsic factors of structures. From the viewpoint of fracture mechanics, it is therefore very important to clarify the mechanism of temperature rising of structural material due to cyclic loading at cryogenic temperature. From this purpose, fatigue test was carried out for high manganese steel at liquid helium temperature(4.2K) using triangular stress waveform to identify both the mechanism of temperature rising near crack tip and the effect of loading stress waveform on temperature rising near crack tip and the effect of loading stress waveforms on temperature rising. As the results, two types of temperature rising, that is, regular and burst types were observed. And a periodical temperature rising corresponding to the stress waveforms was also found. The peaks of the temperature rising were recorded near both the maximum and the minimum values of the applied stress. The sudden temperature rises, which indicated the higher values than those of periodical temperature rises under the repetition of stress, were observed at the final region of crack growth. It was shown that the peak values of the temperature rising increased with stress intensity factor range.

• 마이크로전자및패키징학회지
• /
• 제19권4호
• /
• pp.1-5
• /
• 2012

The quality and performance of electronic parts and equipment are affected by various types of stresses. Thermal stress caused by changes in the ambient usage environment and mechanical stress from vibration shock during transportation can degrade both quality and performance. This paper gives an overview about recent researches for measuring market environmental conditions of electronic equipments.

• 한국의류학회지
• /
• 제5권1호
• /
• pp.27-30
• /
• 1981

The change of physical properties of polyester yarn treated with sodium hydroxide solution for making polyester silk like was investigated. The tenacity of polyester yarn was reduced by increasing alkali concentration and temperature. Degree of polymerization of polyester was decreased slightly but the heat of fusion was not changed appreciably.